Retekess TT117

Contents

RETEKESS TT117 FM Transmitter Wireless Audio Tour Guide System User Manual

Model: TT117 | Brand: Retekess

1. Introduction

This manual provides detailed instructions for the safe and effective use of your RETEKESS TT117 FM Transmitter. The TT117 is designed for wireless audio transmission in various settings such as conferences, guided tours, factory visits, and simultaneous interpretation. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

The TT117 transmitter works in conjunction with a receiver (e.g., TT118) to form a complete wireless audio tour guide system. This manual covers the operation of both the transmitter (TT117) and the receiver (TT118) as they are typically used together.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.

  • 1 x TT117 FM Transmitter
  • 1 x Lavalier Microphone
  • (Optional, if purchased as a set) TT118 Receiver(s)
  • (Optional, if purchased as a set) Earphone(s) for receiver(s)
  • User Manual (this document)
Image showing one TT117 transmitter with a lavalier microphone, labeled '1 x transmitter'.
Figure 2.1: TT117 Transmitter (example package content)

3. Product Overview

3.1 TT117 Transmitter Diagram

Front view of the TT117 transmitter with a lavalier microphone, showing the display screen, CH+ and CH- buttons, mute button, and St key.
Figure 3.1: TT117 Transmitter Front View
Close-up of the top of the TT117 transmitter showing AUX, LOCK ON OFF switch, and MIC input.
Figure 3.2: TT117 Transmitter Top Panel
  1. Display screen
  2. CH + button
  3. CH- button
  4. Mute button
  5. St key (Stereo/Mono switch)
  6. Lanyard nozzle
  7. Battery compartment back cover
  8. AUX jack
  9. Power/lock switch
  10. MIC jack

3.2 TT118 Receiver Overview

The TT118 receiver has a similar compact design to the transmitter. Its main components include:

Front view of a device similar to the TT117 transmitter, representing the TT118 receiver, showing a display screen, CH+ and CH- buttons, VOL+ and VOL- buttons.
Figure 3.3: TT118 Receiver Front View (Illustrative)
  1. Display screen
  2. CH + button
  3. CH- button
  4. VOL + button
  5. VOL- button
  6. Lanyard mouth
  7. Back cover of battery compartment
  8. Power Lock switch
  9. Headphone jack

4. Specifications

4.1 TT117 Transmitter Specifications

FeatureSpecification
Transmit power> 80mW
Appearance materialBlack ABS plastic
Letter-to-manic ratio> 60dB
Distortion< 0.3%
Stereo resolution> 40dB
InputMIC and AUX can be used together
MicrophoneElectret capacitor microphone 3.5 mm
Size99 x 56 x 14mm
Power supply3V = 2PcsX1.5V AA battery
Working voltage3V
Launch distance80 meters
Working hours>8 hours
Frequency range72-76MHz
Channel17 channels
Weight58g
CertificationCE, FCC
FCC ID2A3NOTT117

4.2 TT118 Receiver Specifications

FeatureSpecification
Receiving sensitivity< 1.5uV
Appearance materialBlack ABS plastic
Ratio of letter to mania> 55dB
Distortion< 0.2%
Stereo resolution> 35dB
Size92x53x20mm
Power supply3V = 2PcsX1.5 V AA battery
Receive distance80 m
Working hours> 10 hours
Frequency range72-76MHz

5. Setup

Both the transmitter and receiver are powered by 2 AA batteries. Ensure batteries are installed and have sufficient power before use. The battery level can be observed on the display screen.

5.1 Battery Installation

  1. Locate the battery compartment back cover (7 on diagrams).
  2. Open the cover.
  3. Insert 2 AA 1.5V batteries, ensuring correct polarity.
  4. Close the battery compartment cover securely.
Rear view of the TT117 transmitter with the battery compartment open, showing slots for 2 AA batteries.
Figure 5.1: Battery Compartment

5.2 Connecting Accessories

  • Transmitter (TT117): Plug the microphone (e.g., lavalier microphone) into the MIC jack (10) or an AUX audio cable into the AUX jack (8).
  • Receiver (TT118): Plug headphones into the Headphone jack (9).
Close-up of the top of the TT117 transmitter showing AUX, LOCK ON OFF switch, and MIC input.
Figure 5.2: Transmitter Top Panel (AUX, MIC, Power/Lock Switch)

6. Operating Instructions

6.1 TT117 Transmitter Operation

  • Power On/Off: Toggle the "power switch" (9) to "ON" to power on. Toggle to "OFF" to power off.
  • Lock/Unlock:
    • Lock: Toggle the "power switch" (9) to the "LOCK" position. The screen will display a lock icon. Volume adjustment buttons are not locked in this state.
    • Unlock: Toggle the "power switch" (9) to the "ON" position. The lock icon will disappear.
  • Channel Adjustment: Press "CH +" (2) or "CH-" (3) buttons to adjust the channel. The current channel number (e.g., "CH: 01") will be displayed. There are 17 available channels (CH01-CH17). Ensure the transmitter and receiver are on the same channel.
  • Stereo/Mono Switching: Press the "St" key (5) to switch between mono and stereo modes. When in stereo mode, the screen will display a "STL" icon.

    Note: For stereo sound, the transmitter must use the AUX input method for stereo audio, and the receiver must use dual-channel/stereo headphones.

  • Mute Setting: Press the "Mute" button (4) to mute the transmitter. A mute icon will appear on the screen. Press it again to unmute.

6.2 TT118 Receiver Operation

  • Power On/Off: Toggle the "power switch" (8) to "ON" to power on. Toggle to "OFF" to power off.
  • Lock/Unlock:
    • Lock: Toggle the "power switch" (8) to the "LOCK" position. The screen will display a lock icon. The receiver's mute button is not locked in this state.
    • Unlock: Toggle the "power switch" (8) to the "ON" position. The lock icon will disappear.
  • Channel Adjustment: Press "CH +" (2) or "CH-" (3) buttons to adjust the channel. The current channel number will be displayed. Ensure the receiver is on the same channel as the transmitter.
  • Volume Adjustment: Press "VOL +" (4) or "VOL-" (5) buttons to adjust the headphone volume.

7. Channel Frequency Comparison Table

The following table lists the frequency for each available channel (CH01-CH17).

Table showing Channel (CH) and corresponding Frequency (MHz) values. Channels 1-9 are 72.1, 72.3, 72.6, 72.8, 74.7, 75.4, 75.7, 75.9, 72.5 MHz respectively. Channels 10-17 are 72.2, 72.4, 72.7, 72.9, 75.3, 75.6, 75.8, 75.5 MHz respectively.
Figure 7.1: Channel Frequency Comparison Table
Channel (CH)Frequency (MHz)Channel (CH)Frequency (MHz)
172.11072.2
272.31172.4
372.61272.7
472.81372.9
574.71475.3
675.41575.6
775.71675.8
875.91775.5
972.5

8. Safety Information

Before using this device, please read this guide which contains important operating instructions for safe usage, control information and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards. User instructions should accompany the device when transferred to other users.

8.1 RF Energy Exposure and Product Safety Guide

This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum. RF energy, if used improperly, can cause biological damage. Refer to http://www.who.int/en/ for more information on RF energy exposure and control.

  • Keep the radio at a proper distance from your body.
  • Use only manufacturer-supplied or authorized antennas.
  • Operate the transmitter with documented antennas and in Push-to-Talk and body-worn configurations.
  • Transmit no more than 50% of the time.
  • Reduce the amount of time spent using your wireless device.
  • Use a speakerphone, earpiece, headset, or other hands-free accessory to reduce proximity to the head.
  • Increase the distance between wireless devices and your body.

8.2 Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be made by or under the supervision of a technically qualified person.

8.3 FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device. If this equipment causes harmful interference to radio or television reception, try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

8.4 IC (Innovation, Science and Economic Development Canada) Compliance

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

8.5 Electromagnetic Interference/Compatibility

Nearly every electronic device is susceptible to electromagnetic interference (EMI). During transmissions, your radio generates RF energy that can cause interference with other devices or systems. To avoid interference, turn off the radio in areas where signs are posted to do so, such as hospitals or healthcare facilities.

8.6 Turn Off Your Radio in Specific Conditions

  • Before entering any area with a potentially hazardous or explosive atmosphere (e.g., blasting caps, inflammable gas, dust particles, fueling areas). Only "Intrinsically Safe" radio types should be used in such areas.
  • When taking on fuel or parked at gasoline service stations.
  • When on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.
  • Do not use any radio that has a damaged antenna.
  • Turn off your radio before removing or installing accessories.
  • When the transceiver is used for long transmissions, the radiator and chassis will become hot.

8.7 Protect Your Hearing

The hearing protection symbol (a stylized ear with sound waves) indicates caution regarding loud noises. Exposure to loud noises from any source for extended periods can temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

  • Use the lowest volume necessary. Turn up the volume only if you are in noisy surroundings.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Use earphones carefully; excessive sound pressure can cause hearing loss.

9. Maintenance

  • Keep the device clean and dry.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
  • Use only approved accessories and replacement parts.
  • Remove batteries if the device will not be used for an extended period.

10. Troubleshooting

If you encounter issues with your TT117 transmitter or TT118 receiver, please refer to the following common solutions:

  • No Power:
    • Check if the batteries are correctly installed and have sufficient charge.
    • Ensure the power switch is in the "ON" position.
  • No Sound / Poor Sound Quality:
    • Verify that both the transmitter and receiver are set to the same channel.
    • Ensure the microphone is properly plugged into the transmitter's MIC or AUX jack.
    • Ensure headphones are properly plugged into the receiver's Headphone jack.
    • Adjust the volume on the receiver.
    • Check the distance between the transmitter and receiver; ensure it's within the 80-meter working range.
    • Check for potential interference from other electronic devices.
  • Keys are unresponsive (Transmitter/Receiver):
    • Check if the device is in "LOCK" mode. Toggle the power switch to "ON" to unlock the keys.

11. User Tips

Here are some tips for an enhanced experience with your RETEKESS TT117/TT118 system:

  • Battery Life: Always carry spare AA batteries, especially for long events, as the devices rely on them. Consider using rechargeable AA batteries for environmental and cost benefits.
  • Channel Management: In environments with multiple groups or potential interference, pre-assigning channels and ensuring no overlap can prevent audio disruptions.
  • Microphone Placement: For clear voice transmission, ensure the lavalier microphone is clipped securely and positioned close to the speaker's mouth.
  • Stereo Mode: If utilizing the stereo feature, remember to use a stereo audio source for the transmitter's AUX input and stereo headphones for the receiver to experience the full effect.

12. Warranty and Support

This guarantee card should be kept by the user; no replacement if lost. Most new products carry a two-year manufacturer's warranty from the date of purchase.

12.1 Obtaining Warranty Service

To obtain warranty and after-sales service:

  • Contact the seller where you purchased the product.
  • Alternatively, products may be repaired by an authorized local repair center.
  • For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.

12.2 Exclusions from Warranty Coverage

The warranty does not cover:

  • Any product damaged by accident.
  • Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
  • If the serial number has been altered, defaced, or removed.

For further support, you may refer to the official user manual PDF: View User Manual (PDF)

13. Disposal Information

The crossed-out wheeled-bin symbol (

🗑️

) on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, or accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws and rules in your area.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.