DOBE 7-in-1 USB Arcade Fight Stick Instruction Manual

1. Introduction

This manual provides detailed instructions for the DOBE TP4-1886 7-in-1 USB Arcade Fight Stick. This versatile controller is designed for an authentic arcade gaming experience across multiple platforms, including PlayStation 3 (PS3), PlayStation 4 (PS4), Xbox One, Xbox 360, PC, Android devices, and Nintendo Switch. Please read this manual thoroughly before use to ensure proper setup and operation.

2. Safety Information

• Keep the device away from water and other liquids.
• Avoid exposing the device to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
• Keep out of reach of small children.

3. Package Contents

Please check the package for the following items:

• 1 x DOBE 7-in-1 USB Arcade Fight Stick (Model: TP4-1886)
• 1 x English / Chinese Instruction Manual

4. Product Overview

The arcade fight stick features a classic layout with a joystick and multiple action buttons for an authentic gaming experience.

The stick includes an 8-direction iron stick joystick and 12 simulation buttons: UP/Down/Left/Right, R1, R2, L1, L2, Square (D/X), Triangle (Delta/Y), Circle (O/B), and Cross (X/A).

5. Setup and Connection

The DOBE TP4-1886 is a wired USB device. Connection methods vary by platform.

5.1 Analog Stick Installation

If the joystick ball top is not pre-installed, follow these steps to attach it:

The diagram above illustrates the process, typically involving screwing the ball top onto the joystick shaft.

5.2 PC Connection

For PC (Windows XP / Vista / 7 / 8 / 10), simply plug the USB cable into an available USB port. The device is plug-and-play and should be automatically recognized within 10 seconds.

5.3 Nintendo Switch / Switch Lite Connection

To connect to a Nintendo Switch or Switch Lite, use an OTG adapter or a compatible base. After connecting, press the SHARE button and the L3 button simultaneously for 2 seconds to activate Switch mode.

5.4 PS3 / PS4 / Xbox One / Xbox 360 Connection

For PlayStation 3, PlayStation 4, Xbox One, and Xbox 360, the arcade stick requires an original controller to "drive" it. Use the original controller to guide the corresponding mode.

• PS3/PS4/XBOX360/XBOX ONE mode: Connect the original controller to the arcade stick's designated port (if available) or follow the console's peripheral connection instructions.

5.5 Android Device Connection

Compatible with Android smartphones, Android TV, Android tablets, and Android TV Boxes. An OTG cable may be required for smartphones or tablets (not included).

• Android mode: Short press SHARE + R3 for 2 seconds.

Note: This device is not compatible with any iOS devices or PlayStation 5 (PS5).

6. Operating Instructions

6.1 TURBO Function

The arcade stick supports a TURBO function for rapid button presses. Specific activation instructions are typically found in the game or console settings, or may involve a dedicated TURBO button/combination on the stick itself (refer to the included English/Chinese instruction manual for specifics).

6.2 Joystick Direction Mode

You can switch the joystick's function between a direction stick and a D-pad, depending on the game type. There is one button dedicated to this switch. Refer to the included English/Chinese instruction manual for the exact button and procedure.

7. Maintenance

To ensure the longevity of your arcade fight stick:

• When not in use, the wire and joystick can be stored inside the case. This convenient storage method also protects the joystick from accidental damage.
• Clean the surface of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. Troubleshooting

• Device not recognized on PC: Ensure the USB cable is securely connected. Try a different USB port. For Windows, the device should be automatically recognized.
• Not working on PS5: This arcade stick is explicitly stated not to work on PS5.
• Not working on Xbox Series X/S: While compatible with Xbox One and Xbox 360, compatibility with Xbox Series X/S is not officially stated and may require specific adapters or drivers not covered by this manual.
• Joystick or buttons unresponsive: Check all connections. Ensure the correct mode (Switch, Android, etc.) is activated for your platform.
• No suction cups for grip: The product description and images do not indicate the presence of suction cups for grip.
• Not working on Linux: Compatibility with Linux systems is not officially supported.

9. Specifications

10. User Tips

• Always refer to the specific operation guide included with your product, as connection methods can vary significantly across the many supported devices.
• Ensure you have the original controller for PS3/PS4/Xbox One/Xbox 360 to facilitate connection, as it is required to "drive" the arcade stick into the correct mode.
• For Android devices, an OTG cable might be necessary for direct connection to smartphones or tablets.
• The joystick and cable can be conveniently stored inside the case when not in use, protecting the joystick from damage.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.