Introduction
The SATLINK ST-5155 is a DVB-S-S2/T/T2/C and MPEG-2/4 H.264/H.265(10 Bit) compliant handheld combo meter. Designed for ease of use, its compact size, light weight, intuitive user interface, and long battery life make it an ideal tool for the installation and verification of digital Satellite TV, terrestrial antenna, and cable signals in various residential and multi-dwelling unit environments.
Key Features
- 4.3 Inch High Definition TFT LCD Screen
- Fully DVB-S/S2/T/T2/C compliant
- MPEG2, MPEG4, H.264/MPEG4 AVC, H.265(10 Bit) /HEVC hardware decoding
- Digital meter for signal strength and quality
- Supports Auto Scan and Manual Scan
- Sound and Light Alarm for Locking Signal
- Auto Calculate Angle of AZ, EL
- Supports DISEQC 1.0/1.1/1.2, Unicable, 0/22kHz Tone
- Integrated Speaker
- Support both AV out and AV in
- Support HD-MI out
- LNB short protect
- 7.4V/2600mAh Li-Ion Battery included
- Software upgrade via USB port
- Easy to carry
Package Contents
Ensure all items are present in the package:
- ST-5155 Digital Satellite Meter
- AV cable
- Power Adapter (DC12V/1A)
- Silicone case
- Strap
- English User Manual
Product Overview
Setup
-
Charging the Battery
Before first use, fully charge the internal 7.4V/2600mAh Li-Ion battery. Connect the provided power adapter (DC12V/1A) to the device's charging port and plug it into a 100-240VAC 50/60Hz power outlet. The 'Charge' indicator on the device will illuminate during charging.
-
Connecting to Signal Sources
Depending on the signal type you wish to measure:
- Satellite (DVB-S/S2/S2X): Connect your satellite dish's LNB cable to the DVB-S2 input port (F-type connector) on the device.
- Terrestrial (DVB-T/T2): Connect your terrestrial antenna cable to the DVB-T2 input port (Female type connector).
- Cable (DVB-C): Connect your cable signal to the DVB-T2 input port (Female type connector).
Figure 5: Detailed connection diagram for various signal types and external devices. -
Powering On
Press and hold the power button to turn on the device. The main menu will appear on the 4.3-inch TFT LCD screen.
Operating Instructions
-
Main Menu Navigation
Use the arrow keys and the 'OK' button to navigate through the main menu options:
- Satellite: For DVB-S/S2/S2X signal measurement and channel scanning.
- Terrestrial: For DVB-T/T2 signal measurement and channel scanning.
- Cable: For DVB-C signal measurement and channel scanning.
- Angle Calculation: To assist in calculating azimuth and elevation angles for satellite dish alignment.
- Loop Search: For specific signal search functions.
- Other: Additional utilities.
- Media Center: For playing media files (wma, mp3, mp4, avi, jpg, jpeg, bmp, img) from a USB drive.
- Setting: To configure device parameters, including language, display, and system settings.
-
Signal Measurement and Scanning
Select the appropriate signal type (Satellite, Terrestrial, or Cable) from the main menu. Follow the on-screen prompts to perform either an Auto Scan or Manual Scan. The device will display signal strength and quality, and provide a sound and light alarm when a signal is locked.
-
DISEQC and LNB Control
For satellite installations, the device supports DISEQC 1.0/1.1/1.2, Unicable, and 0/22kHz Tone for controlling LNBs and multi-switches. These settings can typically be configured within the 'Satellite' menu options.
-
AV and HDMI Connections
- AV Out: Connect the provided AV cable to the 3.5mm AV-OUT jack to display the meter's screen on an external monitor or TV.
- AV In: Connect an external video source (e.g., CCTV camera) to the 3.5mm AV-IN jack to view its output on the meter's screen.
- HDMI Out: Use an HDMI cable to connect the HDMI-OUT port to an HD display for high-definition video output.
-
Software Upgrade
The device supports software upgrades via its USB port. Download the latest firmware from the official website, save it to a USB drive, and follow the instructions in the 'Setting' menu for software updates.
Video 1: Product demonstration showcasing the SATLINK ST-5155's features and user interface.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquid cleaners or solvents.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to about 50% and recharge every few months.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- LNB Short Protect: The device features LNB short protection to prevent damage from short circuits in the LNB cable.
Troubleshooting
- No Signal/Weak Signal:
- Check all cable connections for tightness and proper seating.
- Ensure the LNB or antenna is correctly aligned and unobstructed.
- Verify that the correct satellite/transponder or terrestrial/cable parameters are selected in the device settings.
- Check LNB power settings (13V/18V) for satellite signals.
- Device Not Powering On:
- Ensure the battery is charged. Connect the power adapter and try again.
- Check the power adapter for damage.
- Display Issues:
- If the screen is blank or flickering, try restarting the device.
- Ensure the display settings are correctly configured in the 'Setting' menu.
User Tips
- Language Settings: The device supports multiple OSD (On-Screen Display) languages. If you need to change the menu language, navigate to the 'Setting' menu and look for language options.
- Firmware Updates: Regularly check the manufacturer's website for firmware updates. Updates can improve performance, add new features, or fix bugs.
- Silicone Case: Always use the provided silicone case to protect the device from accidental drops and impacts during field use.
Specifications
| Category | Specification |
|---|---|
| Transmission Standards | DVB-S2X/S2/S, DVB-T/T2, DVB-C, H.265(10Bit) |
| Satellite Input Connector | F Type |
| Satellite Input Frequency | 950 to 2150 MHz |
| Satellite Signal Input Level | -65 to -25 dBm |
| Band Switch Control | 22KHz |
| LNB Supply | 13V/18V, Imax 400mA |
| Satellite Demodulation Type | QPSK, 8PSK, 16APSK, 32APSK |
| DVB-T/T2/C Input Connector | Female Type |
| DVB-T/T2/C Input Frequency | 48 to 862 MHz |
| DVB-T/T2/C Signal Input Level | -79.5dBm (MAX) |
| ANT Supply | 5V, 12V |
| DVB-T/T2/C Demodulation Type | QPSK, 16PAM, 64QAM, 256QAM |
| LCD Type | TFT Transmissive |
| Number of Dots | 800x(RGB)x480 |
| Active Area (WxH) | 95.04mm x 53.86 mm |
| AV Output Interface | 3.5 mm jack (Video: CVBS, Audio: Stereo L/R) |
| HDMI Output Connector | HDMI 1.4 |
| AV Input Interface | 3.5 mm jack (Video: CVBS, Audio: Stereo L/R) |
| Video Decompression | HEVC Main Profile level 4.1 and Main10 Profile L4.1 |
| Resolving Rate | 480p, 576p, 720p, 1080i/p |
| Video Format | 4:3, 16:9 |
| Audio Decompression | MPEG-1/2 Layer I/II/III, Dolby AC3/AC3+ |
| Audio Output Mode | Stereo, Mono, R/L |
| Data Service Port Connector | USB |
| Data Protocol | USB2.0 interface |
| File Management System | NTFS, FAT32 |
| File Format Support | wma, mp3, mp4, avi, jpg, jpeg, bmp, img |
| Li-Ion Battery | 7.4V/2600mAh |
| Adapter Output | DC12V/1A |
| Adapter Input | 100-240VAC 50/60Hz |
| Power Consumption | Max. 10W |
| Size (WxDxH) | 170mm x 120mm x 40mm |
| Net Weight | 1kg |
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.
