1. Introduction
Thank you for choosing the Baofeng UV-29 Pro Max Walkie Talkie. This portable multi-band amateur radio is designed for reliable communication with a wide range of features including 999 channels, DTMF signaling, VOX, NOAA weather reception, and versatile charging options. This manual provides essential information for the safe and efficient operation of your device.

2. Safety Information
- Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
- Do not transmit without an antenna attached.
- Keep the radio away from medical devices.
- Use only approved batteries and chargers to prevent damage and ensure safety.
- Avoid exposing the radio to direct sunlight for extended periods or to extreme temperatures.
- Do not disassemble or modify the radio. Repairs should only be performed by qualified technicians.
- Keep the radio and accessories out of reach of children.
3. Package Contents
The standard package for your Baofeng UV-29 Pro Max Walkie Talkie typically includes the following items:
- 1 x Radio Unit
- 1 x Battery
- 1 x Antenna
- 1 x Charger (Desktop or Type-C cable, depending on selection)
- 1 x Belt Clip
- 1 x Strap
- 1 x User Manual
Note: Additional accessories may be included depending on your specific purchase choice.

4. Product Overview
The UV-29 Pro Max features a robust design and a user-friendly interface. Key physical aspects include:
- Display: 1.77" large TFT screen for clear information display.
- Keypad: Full keyboard for direct frequency input and menu navigation.
- Antenna: Removable antenna for optimal signal reception and transmission.
- Control Knobs: Top-mounted knobs for power/volume and channel/frequency selection.
- PTT Button: Side-mounted Push-To-Talk button for transmitting.
- Accessory Port: Two (2) pins for Kenwood accessory compatibility.
- Charging Port: Type-C port for convenient charging.





5. Setup Guide
5.1. Battery Installation
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery pack upwards until it clicks into place.
- To remove, press the battery release latch and slide the battery downwards.
5.2. Antenna Attachment
- Screw the antenna into the connector on the top of the radio clockwise until it is firmly seated.
- Do not overtighten.
5.3. Charging the Battery
Your radio can be charged using either the desktop charger or a Type-C cable.
Desktop Charger:
- Connect the AC adapter to the desktop charger and plug it into a power outlet.
- Place the radio (with battery installed) into the charging tray.
- The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged).
Type-C Charging:
- Connect a Type-C USB cable to the radio's Type-C port.
- Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, power bank).
- The radio's display may indicate charging status.
5.4. Powering On/Off
Rotate the power/volume knob clockwise to turn the radio on. Continue rotating to adjust the volume. Rotate counter-clockwise until a click is heard to turn the radio off.
6. Operation
6.1. Basic Controls
- MENU Button: Accesses the main menu.
- EXIT Button: Exits the current menu or function.
- Up/Down Arrows: Navigate through menu options or adjust frequencies/channels.
- Numeric Keypad: Directly input frequencies, channel numbers, or menu options.
- PTT Button: Press and hold to transmit, release to receive.
6.2. Frequency and Channel Selection
The radio supports both VFO (Frequency Mode) and Channel Mode. You can switch between modes using the appropriate menu option or a dedicated button if available.
- VFO Mode: Directly input frequencies using the numeric keypad. Adjust frequency steps (2.5K, 5.0K, 6.25K, 10.0K, 12.5K, 20.0K, 25.0K, 50.0K) via the menu.
- Channel Mode: Select from up to 999 named memory channels. Channel names can be edited using the built-in input method.
6.3. Transmitting and Receiving
- Transmit: Press and hold the PTT button to transmit. Speak clearly into the microphone. Release PTT to stop transmitting.
- Receive: The radio will automatically receive signals on the selected frequency/channel.
- VOX (Voice Activated Transmit): Enables hands-free transmission when your voice is detected. Adjust VOX sensitivity in the menu.
- Dual Watch/Dual Reception: Allows monitoring of two different frequencies/channels simultaneously.
6.4. Scanning Functions
The UV-29 Pro Max offers various scanning capabilities:
- VFO Scan: Scans within a defined frequency range.
- Channel Scan: Scans through programmed memory channels.
- CTC/DCS Scan: Scans for CTCSS/DCS tones.
- Scan Recovery Methods: Configurable methods for how the scanner resumes after detecting a signal.
- One-Touch Search Frequency: Quickly search for active frequencies.
6.5. DTMF Signaling
The DTMF encoder and manual dial feature allow for analog signaling, including single call, group call, and all call functions.
6.6. NOAA Weather Reception
Tune into NOAA weather channels to receive important weather alerts and forecasts.
6.7. Additional Features
- Language Switch: Switch between Chinese and English display languages.
- Stopwatch Function: Built-in stopwatch for timing activities.
- Alarm Function: Activate an alarm signal.
- High/Low Power: Select between high or low transmission power to conserve battery or extend range.
- Keypad Lock: Lock the keypad to prevent accidental input.
- PC Programmable: Connect to a computer for advanced programming of channels and settings.

7. Maintenance
7.1. Cleaning
Wipe the radio's surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the radio is dry before use or charging.
7.2. Battery Care
- Charge the battery fully before initial use.
- Avoid overcharging or completely draining the battery.
- Store the battery in a cool, dry place when not in use for extended periods.
7.3. Storage
When storing the radio for a long time, remove the battery and store it separately. Keep the radio in a dry, dust-free environment.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio won't turn on | Battery low or not installed correctly. | Charge the battery or re-install it securely. |
| Cannot transmit or receive | Incorrect frequency/channel, antenna loose, battery low, or busy channel lock-out active. | Verify frequency/channel, check antenna connection, charge battery, disable busy channel lock-out. |
| Poor audio quality | Low signal strength, incorrect squelch level, or microphone/speaker obstruction. | Move to an area with better signal, adjust squelch, check for obstructions. |
| Keypad unresponsive | Keypad lock is active. | Unlock the keypad (refer to your user manual for specific key combination). |
9. Specifications
Note: All specifications are subject to change without notice.
General
| Brand Name | BAOFENG |
| Model Number | UV-29 Pro Max |
| Use | Others (Portable Walkie Talkie) |
| Output Power (W) | 10w-25w (Up to 15W) |
| Battery Capacity (mAh) | High Capacity |
| Waterproof / Water-Resistant | IP45 |
| Battery Included | Yes |
| Material | Plastic |
| Storage Channel | 999 Groups |
| Frequency Range | 136-174/220-260/400-520mHz |
| Dimensions (Product) | 117mm (H) x 56mm (W) x 34mm (D) |
| Walkie Talkie Type | Portable |
| Display | Yes (1.77" TFT) |
| Maximum Range | 10km-50km |
| Origin | Mainland China |
| Certification | CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee |
| Frequency Range 1 (RX) | FM 65-108Mhz |
| Frequency Range 2 (RX&TX) | VHF1: 136-174Mhz |
| Frequency Range 3 (RX&TX) | VHF2: 220-260Mhz |
| Frequency Range 4 (RX&TX) | UHF2: 400-520Mhz |
| Channel Spacing | 25.0Khz/12.5Khz |
| Operation Voltage | DC 7.4V±10% |
| Antenna Impedance | 50 Ohm |
| Connection for accessories | 2 pin Kenwood jack |
| Weight (with battery/antenna) | 298g |
Receiver
| Receive Sensitivity | 0.25uV (-120dBm) |
| Intermodulation and Rejection | ≥62dBm |
| Adjacent Channel Selectivity | ≥65dBm |
| FM Noise | 45dB/40dB |
| Rated Audio Power Output | 1W@16ohms (1000mW) |
| Receive Current | ≤380mA |
| Audio Distortion | ≤5% |
Transmitter
| RF Power Output | <5W (Max 15W) |
| Transmission Current | ≤2800mA |
| Modulation | 16K0F3E@25KHZ / 11K0F3E@12.5KHZ |
| Spurious Emission | -16dBm<1GHZ, 16dBm>1GHZ |
| FM Noise | -40dB |
| Audio Distortion | ≤5% |
10. User Tips
- For optimal range, ensure your antenna is securely attached and you have a clear line of sight.
- Experiment with different frequency steps to find the best setting for your local area.
- Utilize the PC programming feature for advanced customization of channels and settings, which can greatly enhance your radio's functionality.
- Keep an eye on the battery indicator on the 1.77" TFT screen to avoid unexpected power loss during critical communications.
11. Warranty and Support
For any issues, technical support, or warranty claims, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty validation.