ALITER RC08C

Contents

Air Conditioning Remote Controller RC08C User Manual

Model: RC08C | Brand: ALITER

1. Introduction

This manual provides instructions for the proper use and maintenance of your ALITER RC08C Air Conditioning Remote Controller. This replacement remote is designed for various Airwell Electra air conditioner models, including HKD, HND, HCD, LCAC, and CDM. It is made from durable ABS material, offering a comfortable and wear-resistant user experience. The remote is ready to use without complex setup or programming; simply insert the batteries.

Front view of the RC08C remote control, displaying 25°C and 0:02 on its screen.
Front view of the RC08C remote control, displaying 25°C and 0:02 on its screen.

2. Setup

2.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide open the battery compartment cover.
  3. Insert two (2) AAA 1.5V batteries (R03 type) according to the polarity indicators (+ and -) inside the compartment.
  4. Close the battery compartment cover securely.

The remote control is designed to work immediately after battery installation without any programming.

Front and back view of the RC08C remote control, showing the battery compartment on the back and the model/battery information label.
Front and back view of the RC08C remote control, showing the battery compartment on the back and the model/battery information label.

3. Operating Instructions

Point the remote control directly at the air conditioner's receiver when operating. Ensure there are no obstructions between the remote and the unit.

3.1 Basic Functions

  • Power Button (U): Press to turn the air conditioner ON or OFF.
  • Temperature Adjustment (+/-): Use the '+' button to increase the temperature and the '-' button to decrease it.
  • Mode Button (MODE): Cycle through different operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • Fan Speed Button (Fan icon): Adjust the fan speed (e.g., Low, Medium, High, Auto).
  • Swing/Louvre Control: Adjust the direction of the airflow. (Specific button may vary, refer to image for detailed button layout).
Angled view of the RC08C remote control, showing a wider array of buttons including MODE, FEEL, +80, SET, CLR, LIGHT, and EYE, in addition to power, temperature, and fan controls.
Angled view of the RC08C remote control, showing a wider array of buttons including MODE, FEEL, +80, SET, CLR, LIGHT, and EYE, in addition to power, temperature, and fan controls.
Video demonstrating the RC08C remote control interacting with an air conditioning unit, showing air flow.

4. Maintenance

4.1 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.

4.2 Battery Replacement

If the remote control's range decreases or it stops responding, replace both AAA batteries with new ones. Always replace both batteries at the same time and ensure correct polarity.

5. Troubleshooting

  • Remote not responding: Check if the batteries are inserted correctly and are not depleted. Replace batteries if necessary. Ensure there are no obstructions between the remote and the air conditioner.
  • Limited range: Replace batteries. Ensure the remote is pointed directly at the air conditioner's receiver.
  • Display not working: Replace batteries. If the issue persists, the remote may be faulty.

6. Specifications

FeatureSpecification
Model NumberRC08C / 12PA4NB1401204
Brand NameALITER
MaterialABS
SizeApprox. 16.5 cm / 6.5 inches
ColorWhite
Frequency433 MHz
Wireless CommunicationIR (Infrared)
UseAir Conditioner
Channel1
Batteries2 x 1.5V AAA (R03)
ApplicationFor Airwell Electra HKD HND HCD LCAC CDM
RC08C remote control with a measurement indicating its length is approximately 13 cm / 5.12 inches.
RC08C remote control with a measurement indicating its length is approximately 13 cm / 5.12 inches.

7. User Tips

  • For optimal performance, use high-quality alkaline batteries.
  • Avoid exposing the remote control to direct sunlight or extreme temperatures.
  • Keep the remote control away from moisture and liquids.

8. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details or technical support, please refer to the seller's information or contact their customer service. Keep your purchase receipt as proof of purchase.

© 2024 ALITER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.