DIATONE M10 PRO

Contents

DIATONE Mamba GPS M10 PRO with Compass User Manual

Model: M10 PRO

1. Introduction

The DIATONE Mamba GPS M10 PRO with Compass is a high-performance Global Positioning System (GPS) module designed for FPV (First Person View) drones and other remote-controlled vehicles. Featuring the UBLOX-M10 chip and an integrated QMC5883L compass, this module provides accurate positioning, speed, and heading data crucial for stable flight, return-to-home functions, and advanced navigation. Its compact size and robust design make it suitable for a wide range of FPV applications.

DIATONE Mamba GPS M10 PRO module, front view
Figure 1: Mamba GPS M10 PRO Module

2. Safety Warnings

  • Always ensure correct wiring polarity (positive and negative) to prevent damage to the module and other components.
  • Avoid exposing the module to extreme temperatures, moisture, or direct sunlight for prolonged periods.
  • Handle the module with care to avoid electrostatic discharge (ESD) damage.
  • Ensure the module is securely mounted to prevent vibrations from affecting performance.
  • Do not attempt to modify or disassemble the module, as this may void the warranty and cause malfunction.
  • Keep out of reach of children.

3. Package Contents

Please check the package to ensure all items are present:

  • 1x DIATONE Mamba GPS M10 PRO Module
  • 1x Wire Harness (JST-GH connector to loose wires)
DIATONE Mamba GPS M10 PRO module with short wire harness connected
Figure 2: Mamba GPS M10 PRO Module with Wire Harness

4. Setup and Installation

4.1. Physical Installation

  1. Mount the Mamba GPS M10 PRO module securely on your FPV drone frame. Choose a location away from other electronic components that might cause electromagnetic interference (e.g., VTX, ESCs).
  2. Ensure the module is oriented correctly. The arrow or text on the module typically indicates the forward direction of the drone.
  3. For optimal GPS signal reception, mount the module with a clear view of the sky, preferably on the top of the drone.

4.2. Wiring

Connect the provided wire harness to the GPS module and then to your flight controller (FC). The module uses a standard UART connection for GPS data and an I2C connection for the compass. Refer to your flight controller's manual for specific UART and I2C pad locations.

DIATONE Mamba GPS M10 PRO module with longer wire harness, showing individual wire colors for connection
Figure 3: Mamba GPS M10 PRO Wiring Diagram (Example)
Typical Wiring Connections
GPS Module PinWire Color (Typical)Flight Controller PinFunction
VCCRed5VPower Input
GNDBlackGNDGround
TXGreenRX (on a free UART)GPS Data Out
RXWhiteTX (on the same UART)GPS Data In (optional, for configuration)
SDAYellowSDA (I2C)Compass Data Line
SCLBlueSCL (I2C)Compass Clock Line

Note: Wire colors may vary. Always verify pin labels on the module and your flight controller.

4.3. Flight Controller Configuration (e.g., Betaflight, INAV, ArduPilot)

  1. Connect your flight controller to your computer and open the appropriate configurator software (e.g., Betaflight Configurator, INAV Configurator).
  2. Navigate to the 'Ports' tab.
  3. Enable 'Serial RX' for the UART port connected to the GPS module's TX pin. Set the Baud Rate to 115200.
  4. Navigate to the 'Configuration' tab.
  5. Enable the 'GPS' feature and select the correct GPS protocol (UBLOX is common).
  6. Enable the 'MAG' (Magnetometer/Compass) feature. Select 'HMC5883' or 'QMC5883L' as the compass type.
  7. Set the compass alignment according to how the GPS module is mounted relative to your flight controller. This is crucial for accurate heading.
  8. Save and reboot your flight controller.

5. Operation

Once installed and configured, the Mamba GPS M10 PRO module will begin acquiring satellite signals upon power-up. This process, known as 'cold start' or 'hot start', can take a few seconds to several minutes depending on environmental conditions and previous usage.

  1. Power On: Connect your drone's battery. The GPS module's LED indicator (if present) may flash to indicate satellite acquisition status.
  2. Satellite Acquisition: Place the drone outdoors with a clear view of the sky. The module will search for and lock onto satellites. A solid LED or a specific flash pattern usually indicates a successful GPS lock (e.g., 3D fix).
  3. Data Transmission: The GPS module continuously transmits positioning data (latitude, longitude, altitude), speed, and time to the flight controller via the UART connection. The compass provides heading information via I2C.
  4. Flight Controller Integration: Your flight controller uses this data for various functions, including:
    • Displaying GPS coordinates, speed, and altitude on your OSD (On-Screen Display).
    • Enabling GPS-dependent flight modes (e.g., GPS Hold, Return-to-Home).
    • Providing accurate heading information for stable flight and navigation.

6. Maintenance

  • Cleaning: Keep the module clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
  • Inspection: Periodically inspect the wiring and connectors for any signs of wear, damage, or loose connections.
  • Firmware: While the GPS module itself typically does not require user firmware updates, ensure your flight controller's firmware is up-to-date to benefit from the latest GPS and compass integration features.
  • Storage: When not in use, store the module in a dry, cool place, away from direct sunlight and strong magnetic fields.

7. Troubleshooting

7.1. No GPS Lock / Slow Lock

  • Check Environment: Ensure you are outdoors with a clear view of the sky, away from tall buildings, dense foliage, or strong electromagnetic interference.
  • Wiring: Double-check all wiring connections (VCC, GND, TX, RX) between the GPS module and the flight controller.
  • Flight Controller Configuration: Verify that the correct UART port is enabled for GPS, the Baud Rate is 115200, and the GPS protocol (UBLOX) is selected in your FC configurator.
  • Power: Ensure the module is receiving stable 5V power.

7.2. Incorrect Compass Heading / Compass Not Detected

  • Wiring: Verify SDA and SCL connections to the I2C pads on your flight controller.
  • Flight Controller Configuration: Ensure the compass feature is enabled and the correct compass type (QMC5883L or HMC5883) is selected.
  • Compass Alignment: Correctly set the compass alignment in your FC configurator. An incorrect alignment will result in an inaccurate heading.
  • Interference: Keep the GPS module away from power wires, ESCs, motors, and other components that generate strong magnetic fields.
  • Calibration: Perform a compass calibration in your flight controller software.

7.3. Module Not Powering On

  • Power Connection: Check the 5V and GND connections.
  • Polarity: Ensure the power connections are not reversed.
  • Damage: Inspect the module for any visible physical damage.

8. Specifications

FeatureDetail
ChipUBLOX-M10
FrequencyGPS L1, GLONASS L10F, BeiDouB11/B1C, Galileo E1B/C, QZSS L1, SBAS L1 C/A
Input Voltage5V
AntennaCeramic Antenna
Channel72
CompassQMC5883L
Baud Rate115200bps
ProtocolDual NMEA/UBLOX
Output Frequency1Hz-10Hz (10Hz default)
Speed Accuracy0.05m/s
Horizontal Positioning Accuracy2D ACC 1.5m (outdoor)
Receiver SensitivityTrace -167dBm; Capture -160dBm
Dynamic CharacteristicsHeight 50000m; Speed 500m/s; Acceleration 4G
Operating Temperature-40~ +85℃
Storage Temperature-40~+105℃
Weight7.5g
Size18*18*6 mm

9. User Tips

  • Cold Start Patience: The first time you power on the GPS module, or after a long period of inactivity, it may take longer to acquire a satellite lock (a 'cold start'). Be patient and ensure a clear view of the sky.
  • Compass Calibration: Always perform a compass calibration after initial installation, or if you notice inconsistent heading data. This helps compensate for magnetic interference from other drone components.
  • Mounting Location: Experiment with different mounting locations if you experience poor GPS performance. Moving the module slightly can sometimes significantly improve signal reception.
  • Interference: Keep the GPS module as far as possible from high-current wires, motors, ESCs, and video transmitters (VTX), as these can generate electromagnetic interference that degrades GPS and compass performance.

10. Warranty and Support

This product is covered by the manufacturer's standard warranty against defects in materials and workmanship. For warranty claims or technical support, please contact the DIATONE Official Store or your authorized reseller with your proof of purchase. Please note that damage caused by improper installation, misuse, or unauthorized modifications is not covered under warranty.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.