RETEVIS RB637/RB37

Contents

Retevis RB637/RB37 Bluetooth Two-Way Radio User Manual

Model: RB637 / RB37 | Brand: RETEVIS

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your Retevis RB637/RB37 Bluetooth Two-Way Radio. This portable radio is designed for reliable communication in various environments, featuring Bluetooth connectivity, Type-C charging, and advanced functions like VOX and wireless copy. Please read this manual thoroughly before using the device.

Retevis RB637/RB37 Two-Way Radio and Bluetooth Headset
Retevis RB637/RB37 Two-Way Radio with included Bluetooth Headset.

2. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your retailer.

Enclosed Accessories
ItemQuantity
Transceiver (with Type-C charging port)1
Li-ion Battery 3.7V1
Charger1
Belt clip1
User's Manual1
Hand Strap1
Type-C charging line1
Bluetooth earphone1
Diagram showing all included accessories for the Retevis RB637/RB37 radio.
Visual representation of the standard package contents.

3. Product Overview

Familiarize yourself with the components of your RB637/RB37 radio and Bluetooth headset.

Diagram of RB637/RB37 radio and Bluetooth headset with numbered parts.
Main components of the RB637/RB37 radio and Bluetooth headset.
  1. Antenna: For transmitting and receiving signals.
  2. Volume/Power Switch: Rotates to turn the radio on/off and adjust volume.
  3. Flashlight: Integrated LED light.
  4. LED Indicator: Shows status (e.g., transmitting, receiving, charging).
  5. Speaker: For audio output.
  6. Microphone: For audio input.
  7. PTT Key: Push-to-Talk button for transmitting.
  8. PF1/Channel Up: Programmable function key, also for channel up.
  9. PF2/Channel Down: Programmable function key, also for channel down.
  10. Belt Clip: For attaching the radio to clothing.
  11. Earpiece Jack: For connecting external audio accessories.
  12. Charging Indicator (Type-C): Shows charging status.

Bluetooth Headset Controls:

  1. Touch PTT: Touch-sensitive Push-to-Talk area.
  2. Indicator Light: Shows headset status.
  3. PTT Button: Physical Push-to-Talk button.
  4. Volume +: Increase volume.
  5. Volume -: Decrease volume.
  6. Power On/Off: Power button for the headset.

4. Setup

4.1 Battery Installation

Ensure the radio is powered off before installing or removing the battery.

  1. Align the battery with the battery compartment on the back of the radio.
  2. Gently push the battery into place until it clicks securely.
  3. To remove, slide the battery release latch and pull the battery away from the radio.
Image showing the battery compartment of the walkie-talkie with the battery removed.
Battery compartment and battery for the RB637/RB37 radio.

4.2 Charging

The RB637/RB37 radio and its Bluetooth headset feature convenient Type-C charging. The radio can be charged using either a desktop charger or a direct Type-C cable connection.

  1. Radio Charging: Place the transceiver into the desktop charger or connect the Type-C charging cable directly to the radio's Type-C port. The indicator light will be red during charging and turn green when fully charged.
  2. Bluetooth Headset Charging: Connect the Type-C charging cable to the headset's Type-C port. The indicator light will show charging status.
Diagram showing desktop and direct Type-C charging methods for the walkie-talkie and Bluetooth headset.
Type-C charging options for the radio and headset.

Charging Indicator Status:

  • Red light: Charging in progress.
  • Green light: Fully charged.

The radio has a 2000mAh battery providing up to 120 hours of standby time. The Bluetooth headset has a 180mAh battery, offering 12 hours of working time and 150 hours of standby time.

Diagram illustrating the long standby times for both the walkie-talkie (120h) and the Bluetooth headset (150h).
Long standby time for the radio and headset.

5. Basic Operations

5.1 Power ON / OFF

Rotate the Volume Switch clockwise until a “Click” sound is heard to power on the radio. Rotate it anti-clockwise until a “Click” sound is heard to power off.

5.2 Communication (PTT)

To transmit, press the PTT key. The indicator turns red. Speak into the microphone. Release the PTT key to receive messages. The indicator light will be green when receiving.

5.3 Volume Increase / Decrease

Rotate the Volume Switch clockwise to increase the volume, and anti-clockwise to decrease it.

5.4 Channel Adjustment

Press the PF1 / Channel Increase key to move up through channels. Press the PF2 / Channel Decrease key to move down through channels.

5.5 Low Battery Voltage Warning

When you hear “Please charge battery” and the indicator flashes red, the battery voltage is low. Please charge the radio.

5.6 Monitor

Press the assigned Identify key (programmed for Monitor function) for 2 seconds to activate Monitor. Release the key to turn off.

5.7 Flashlight

Press the assigned Identify key (programmed for Flashlight function) for 2 seconds to turn on the flashlight. Repeat to turn off.

Image showing the powerful flashlight feature of the walkie-talkie.
The radio features a powerful built-in flashlight.

5.8 Alarm Function

Press the assigned Identify key (programmed for Alarm function) for 2 seconds to activate the alarm. Press the PTT key to turn off the alarm.

Image illustrating the local/remote alarm function of the walkie-talkie.
The radio supports local and remote emergency alarm functions.

5.9 VOX Function (Voice Operated Exchange)

VOX allows hands-free communication without pressing the PTT button.

  1. Activate VOX: Press and hold PF1 and PF2 buttons simultaneously while turning on the radio. After 2 seconds, you will hear three beeps, indicating VOX mode is entered.
  2. Adjust VOX Level: In VOX mode, short press PF1 to increase VOX level (more sensitive) or PF2 to decrease VOX level (less sensitive). A voice prompt (e.g., "VOX1...VOX9 / VOX OFF") will confirm the level. Press PTT to save and exit.
  3. Bluetooth Headset VOX: If a Bluetooth headset is connected, you can use it to transmit without pressing PTT when VOX is active.
Diagram showing VOX hands-free operation with the walkie-talkie and Bluetooth headset.
VOX function enables hands-free communication.

5.10 Key Locks

Press the assigned Identify key (programmed for Channel-Lock function) for 2 seconds. The radio will emit a “Beep” sound, and channel adjustment will be unavailable. Repeat this operation to unlock.

5.11 Scan

Press the assigned Identify key (programmed for Scan function) for 2 seconds to activate scan. Repeat to turn off scan.

6. Advanced Features

6.1 Wireless Copy Function

This feature allows you to easily copy frequencies between two RB637/RB37 radios without programming software.

  1. Receiver Radio: On the receiving radio, press and hold the PF2 key while turning it on. Keep holding PF2 for 1 second. When the green light flashes and you hear "Beep" 3 times, the radio is in wireless copy receiving mode.
  2. Transmitter Radio: On the transmitting radio, press and hold the PF1 key while turning it on. Keep holding PF1 for 1 second. When the red light flashes and you hear "Beep" 3 times, the radio is in wireless copy replication mode.
  3. Transmit Data: Press the PTT key on the transmitter radio. The red light will flash to indicate data transmission. The receiver's red and green lights will flash alternately, indicating data reception. Both radios will automatically exit the mode after completion.

Note: The wireless copy frequency and ID code of the transmitter and receiver must be the same to transmit data. These can be changed via programming software.

Diagram illustrating the wireless copy function between multiple walkie-talkies.
Wireless copy function for easy frequency replication.

6.2 Bluetooth Headset Connection & Pairing

The RB637/RB37 radio is compatible with Bluetooth headsets for enhanced convenience.

Diagram highlighting features of the upgraded Bluetooth headset: smaller, lighter, memory, touch PTT, quicker connection, high sound quality, Type-C charging.
Features of the upgraded Bluetooth Headset.

Bluetooth Headset Operation:

  • On/Off: Long press the power button for 1 second to turn on, 3 seconds to turn off.
  • Volume: Use '+' and '-' keys to adjust.
  • PTT (Walkie-Talkie): Short press to transmit/cancel. Long press to transmit and release to cancel.
  • PTT (Mobile Phone): Short press for play/pause, answer/hang up. Double-click for a call.
  • Touch PTT: Transmits when touched, stops when released.

Pairing the Walkie-Talkie with a Bluetooth Headset:

  1. Walkie-Talkie Pairing Mode: When powered off, press and hold the PTT key + PF2 key simultaneously. Turn the volume knob to turn it on. The green light flashes 3 times quickly, and you hear "beep" 3 times. When the white light flashes quickly, you can release the buttons. The walkie-talkie is now in Bluetooth pairing mode.
  2. Bluetooth Headset Pairing Mode: When powered off, press and hold the on/off button for 5 seconds. The red and blue lights will flash alternately, indicating pairing mode.
  3. Connection: Once both devices are in pairing mode, they will connect. A successful pairing is indicated by the walkie-talkie's white light flashing once every 5 seconds and the Bluetooth headset's blue light flashing once every 5 seconds.

Bluetooth Headset Indicator Status:

  • Power on: Blue light on.
  • Not connected: Blue light flashes quickly.
  • Connected: Blue light flashes once every 5 seconds (if VOX is on, red light is always on).
  • Pairing: Red and blue flash alternately.
  • During a call: Red light is always on.
  • Low battery: Red light flashes once every 5 seconds.
  • Power off: Red light flashes 3 times.
  • Charging: Red light is always on.
  • Fully charged: Red light is off.
Diagram showing the Bluetooth headset connection range of 6 meters to the walkie-talkie, and compatibility with phones and other walkie-talkies.
The Bluetooth headset offers a connection range of up to 6 meters and wide compatibility.

6.3 CTCSS/DCS (Continuous Tone-Coded Squelch System / Digital Coded Squelch)

CTCSS/DCS signaling can be set on the transceiver channel via software. The squelch will only open when receiving the same CTCSS/DCS signaling from another transceiver. If channels are the same but CTCSS/DCS signaling differs, the squelch will not open, and only a green light will indicate activity.

Product demonstration video showing key features and operations of the Retevis RB637/RB37 radio and Bluetooth headset.

7. Specifications

RB637/RB37 Technical Parameters
ParameterValue
ModelRB37 & RB637
FrequencyFRS/PMR
Channel Number22CH/16CH
Channel Spacing12.5KHz
Standby Current≤20mA
Operating Temperature Range-10°C ~ +50°C
Antenna Impedance50Ω
Rated Voltage3.7V DC
RF PowerHigh: 2W / Low: 0.5W
Audio Distortion≤5%
Frequency Stability±2.5ppm
Maximum Frequency Deviation≤5KHz/≤2.5KHz
Remanent Radiation≤7uW
Modulation Mode16KφF3E/ 11KφF3E
Reference Sensitivity≤0.25uV/≤0.3uV
Noise-free Sensitivity≤0.2uV/≤0.25uV
Adjacent Channel Selectivity≥65dB
Spurious Response Rejection≥55dB
Inter-Modulation≥60dB
Electric Current≤1.3A
Table of technical specifications for the RB637/RB37 radio.
Detailed technical specifications for the RB637/RB37 radio.
Bluetooth Headset Technical Parameters
ParameterValue
Product NumberBluetooth Headset
Bluetooth Version5.1
Battery Capacity180mAh
Socket TypeType-C
Charging Time2H
Working Time12H (Fully charged)
Standby Time150H
Use Current13-15mAh
Standby Current1mAh
Charging Voltage5V
Dimension56*19*12mm
Weight (Host)13.2g
Table of technical specifications for the Bluetooth headset.
Detailed technical specifications for the Bluetooth Headset.

8. Safety Information

Please read the following safety guidelines carefully to ensure safe operation and compliance with regulations.

8.1 RF Energy Exposure and Product Safety Guide

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

  • User instructions should accompany the device when transferred to other users.
  • Do not use this device if the operational requirements described herein are not met.
  • This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, which when used improperly, can cause biological damage.
  • All Retevis two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels.
  • Do NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits.
  • Do NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure compliance requirements to be exceeded.
  • During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
  • Do NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

8.2 Radio License

Governments regulate radio frequencies. To transmit on these frequencies, a license may be required. Please contact your local government radio management departments for detailed classification and use of your radio. Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.

8.3 Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority. Transmitter adjustments should only be made by certified personnel. Replacement of any transmitter component not authorized by local government radio management departments could violate rules.

8.4 FCC Requirements

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. (Licensed radios are applicable). This device must accept any interference received, including interference that may cause undesired operation.

For GMRS radio stations, a valid individual license is required. To obtain a license, applicants must be eligible and follow FCC rules and procedures. Visit the FCC website (www.fcc.gov/wireless/support/fcc-form-605) for instructions. Immediate family members of a licensee may also operate the GMRS station.

8.5 CE Requirements

Shenzhen Retevis Technology Co., Ltd. declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. This product can be used in EU countries and regions.

8.6 IC Requirements

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

8.7 Avoid Burns

  • Antennas: Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn can result.
  • Batteries: Exercise care in handling any battery, particularly when placing it inside a pocket, purse or other container with metal objects, as conductive materials may short circuit the battery. Keep batteries out of reach of children. Seek medical attention if swallowed. Dispose of used batteries safely.
  • Long transmission: When the transceiver is used for long transmissions, the radiator and chassis will become hot.

8.8 Safety Operation

  • Forbid: Do not use charger outdoors or in moist environments. Use only in dry locations/conditions. Do not disassemble the charger. Do not operate the charger if it has been broken or damaged. Do not place a portable radio in the area over an air bag or in the air bag deployment area.
  • Reduce risk: Pull by the plug rather than the cord when disconnecting the charger. Unplug the charger from the AC outlet before any maintenance or cleaning.

8.9 Avoid Choking Hazard

The product contains small parts. Keep out of reach of children under 3 years.

8.10 Protect Your Hearing

  • Use the lowest volume necessary to do your job.
  • Turn up the volume only if you are in noisy surroundings.
  • Turn down the volume before adding headset or earpiece.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.

9. Troubleshooting

  • Q: Can RB637 earphones turn on VOX function?
    A: Yes, after turning on the VOX voice control on the radio, if you connect a Bluetooth headset, you can use the Bluetooth headset to transmit without pressing PTT.
  • Q: What's the difference between RB637-PMR and RB37-FRS?
    A: The walkie-talkie hardware is identical. The difference lies in the factory frequency and power settings, which are tailored to regional standards. PMR (PMR446) is the standard for European countries (0.5W, 446MHz), while FRS is for American countries like Canada and the United States (2W, 462MHz). For other countries, if frequency modification is needed, a programming cable is required.

10. User Tips

  • For optimal battery life, fully charge both the radio and the Bluetooth headset before first use.
  • Utilize the wireless copy function to quickly set up multiple radios with the same channels, enhancing team communication efficiency.
  • When working in noisy environments, adjust the squelch level to reduce background noise and improve call clarity.
  • The VOX function is particularly useful in situations where hands-free operation is critical, such as in busy restaurant or hotel settings.
  • Remember to check local regulations regarding radio use, especially concerning frequency and power settings, to ensure compliance.

11. Warranty & Support

11.1 Guarantee

This guarantee card should be kept by the user; no replacement if lost. Most new products carry a two-year manufacturer's warranty from the date of purchase. For further details, please visit www.retevis.com/after-sale/.

The user can get warranty and after-sales service by contacting the seller where you buy or through our Local Repair Center. For warranty service, a receipt or proof of purchase from the actual seller is required.

Exclusions from Warranty Coverage:

  • Any product damaged by accident.
  • Damage due to misuse, abuse, unauthorized alterations, or repairs.
  • If the serial number has been altered, defaced, or removed.

11.2 Support

For downloading further resources such as brochures, software/firmware, or manuals, please contact your direct reseller first or visit the Retevis website (www.retevis.com) and check the "support" section in the relevant product link.

Shenzhen Retevis Technology Co.,Ltd.
Add: 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China
Web: www.retevis.com
E-mail: kam@retevis.com
Facebook: facebook.com/retevis

© 2023 Retevis. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.