1. Introduction and Overview
Thank you for choosing the bowAI Smart Sweeping Robot OB8S. This innovative 3-in-1 device is designed to simplify your home cleaning routine by sweeping, vacuuming, and mopping. Featuring intelligent planning, APP remote control, and a slim design, it efficiently cleans various floor types while navigating obstacles with ease.
Key features include:
- 3-in-1 Cleaning: Sweeping, suction, and mopping capabilities.
- APP Intelligent Control: Remote control and scheduled cleaning via a mobile application.
- Slim Design: 6.8cm body for cleaning under furniture and in tight spaces.
- Powerful Suction: 1800Pa for effective dust and debris removal.
- Long Battery Life: 3000mAh battery providing 61-120 minutes of runtime, covering up to 150m².
- Quiet Operation: Noise level below 70dB for a peaceful cleaning experience.
- Smart Navigation: Intelligent anti-collision, anti-drop, and obstacle overcoming (up to 1.8cm, 15° climb).
- Large Dust Box: 400ml sealed dust box, requiring cleaning approximately once a week.
2. Safety Instructions
Please read all safety instructions carefully before using the appliance and keep this manual for future reference.
- This appliance is for household use only. Do not use it outdoors or on commercial surfaces.
- Do not allow children to play with the appliance. Supervise children and pets when the robot is operating.
- Ensure the charging cable is not damaged. If damaged, contact customer support for replacement.
- Do not operate the robot in wet environments or near water.
- Remove any loose cables, small objects, or fragile items from the floor before operation to prevent entanglement or damage.
- Do not block the suction inlet or any openings. Keep them free of dust, lint, hair, and anything that may reduce airflow.
- Turn off the robot and unplug it before cleaning or performing maintenance.
- Do not use the robot to pick up large debris, sharp objects, or liquids.
- Only use the original charging adapter provided with the robot.
3. Package Contents
Verify that all items are present in your package:
- 1 x Robot Host
- 2 x Brushes
- 1 x Cleaning Cloth
- 1 x Charging Cable

4. Product Diagram

Top View:
- Crash barrier
- Power button
- Indicator light
- Panel
- Panel switch
Bottom View:
- Universal wheel
- Brush
- Big mouth (suction port)
- Off road wheel
- Main switch
- Rag (mop pad)
5. Setup
- Unpack: Carefully remove the robot and all accessories from the packaging.
- Charge the Robot: Connect the charging cable to the robot and a power source. Ensure the robot is fully charged before its first use. The indicator light will show charging status.
- Install Brushes: Attach the two side brushes to their designated slots on the bottom of the robot. Press firmly until they click into place.
- Attach Cleaning Cloth: Secure the cleaning cloth to the bottom of the robot, ensuring it is properly aligned for mopping functionality.
- Power On: Flip the main switch on the bottom of the robot to the 'ON' position.
6. Operating Instructions
The OB8S offers both one-key start and APP intelligent control for convenient operation.
6.1 One-Key Start
Press the power button on the top of the robot to start or pause cleaning. The robot will begin cleaning in its default mode.
6.2 APP Intelligent Control
For advanced features and remote control, download the mobile APP named SDJ. Once installed, turn on Bluetooth on your smartphone and connect to the robot. The APP allows you to:
- Control the robot's switch (on/off).
- Set scheduled start times for cleaning.
- Control the cleaning direction.
- Select different cleaning modes.


6.3 Scheduled Cleaning
Utilize the APP to set regular cleaning schedules. This allows the robot to automatically clean at specified times, ensuring your home remains tidy without manual intervention.

7. Cleaning Modes
The OB8S offers multiple cleaning modes to suit different needs:
- Free Cleaning: Comprehensive whole-house cleaning.
- Schedule a Cleaning: Set specific times for thorough cleaning.
- Edge Cleaning: Focuses on cleaning along walls and corners.
- Bow Sweep: Utilizes a reasonable and efficient path planning for high coverage.


8. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum.
8.1 Emptying the Dust Box
The 400ml sealed dust box should be emptied regularly, ideally once a week or more frequently depending on usage and debris accumulation.
- Open the top panel of the robot.
- Remove the dust box by lifting it out.
- Open the dust box lid and discard collected debris.
- Clean the filter screen inside the dust box.
- Close the dust box lid and reinsert it into the robot.
- Close the top panel.

8.2 Cleaning Brushes
Periodically remove and clean the side brushes to remove tangled hair or debris. Use a small brush or your fingers to clear any obstructions.
8.3 Cleaning Cloth
After each mopping session, remove the cleaning cloth and wash it thoroughly. It can be added with disinfectant for enhanced cleaning.
9. Troubleshooting
If you encounter issues with your robot vacuum, refer to the following common problems and solutions:
- Robot does not turn on: Ensure the main switch on the bottom is ON and the battery is charged.
- Robot is not charging: Check if the charging cable is securely connected to both the robot and the power source. Verify the power outlet is functional.
- Reduced suction power: Empty the dust box and clean the filter. Check the suction port for any blockages.
- Robot gets stuck frequently: Clear the cleaning area of obstacles, loose cables, and thick rugs. The robot can overcome obstacles up to 1.8cm.
- Robot is making unusual noise: Check if the brushes are tangled with hair or debris. Ensure the dust box is properly installed.
- APP connection issues: Ensure Bluetooth is enabled on your phone and the robot is within range. Restart both the robot and the APP.
If the problem persists, please contact customer support.
10. Specifications

| Feature | Detail |
|---|---|
| Brand Name | bowAI / Donirt |
| Model | OB8S |
| Product Size | 27.8 x 27.8 x 6.8 cm |
| Product Weight | 820g |
| Package Dimensions | 36 x 11 x 32 cm |
| Rated Voltage | 3.7V |
| Rated Power | 9W |
| Battery Capacity | 3000mAh |
| Operating Hours | 61-120 minutes (approx. 70 minutes) |
| Charging Time | About 3.5 hours |
| Dust Box Capacity | 400ml |
| Running Noise | < 70dB |
| Suction Power | 1800Pa |
| Cleaning Route | Random / Gyroscope Navigation |
| Obstacle Climbing | Up to 1.8cm (15° incline) |
| Applicable Area | More than 150 square meters |
| Certification | CE |
11. User Tips
- For optimal mopping results, pre-wet the cleaning cloth before attaching it to the robot.
- Regularly check and clean the sensors on the robot to ensure effective anti-collision and anti-drop functionality.
- If the robot frequently gets stuck on carpets, consider using it on hard floors primarily or supervising its operation on carpeted areas.
- Utilize the scheduled cleaning feature via the APP to maintain a consistent cleaning routine, especially when you are away from home.
- For a deeper clean, consider running the robot in 'Schedule a Cleaning' mode, which is designed for more thorough coverage.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official bowAI website. Keep your purchase receipt as proof of purchase.