UnionSine US-Z2

Contents

UnionSine Dual Bay HDD Docking Station User Manual

Model: US-Z2

1. Introduction

Thank you for choosing the UnionSine Dual Bay HDD Docking Station. This device provides a convenient and efficient solution for managing your 2.5-inch and 3.5-inch SATA HDDs and SSDs. With its dual-bay design, USB 3.0 connectivity, and offline cloning capability, it simplifies data backup, transfer, and storage expansion. Please read this manual carefully to ensure proper use and optimal performance of your docking station.

UnionSine Dual Bay HDD Docking Station with two hard drives inserted
The UnionSine Dual Bay HDD Docking Station, supporting 2.5-inch and 3.5-inch drives with USB 3.0 and offline cloning.

2. Product Overview

The UnionSine US-Z2 Dual Bay HDD Docking Station is designed for versatility and ease of use. It features:

  • Dual Bay Design: Supports two 2.5-inch or 3.5-inch SATA HDDs/SSDs simultaneously.
  • Offline Clone Functionality: Allows direct disk-to-disk cloning without a computer connection.
  • USB 3.0 Connectivity: Offers SuperSpeed data transfer rates up to 5Gbps, enhanced by UASP Transfer Protocol for 20% faster performance.
  • Wide Compatibility: Compatible with Windows, Linux, and Mac OS.
  • Intelligent Features: Plug and play, hot-swapping, mute sleep mode, and LED indicators for working status.
  • Robust Power Supply: Equipped with a 12V/3A power adapter to ensure stable operation for large capacity drives up to 16TB per bay (36TB total).
  • Efficient Heat Dissipation: Vertical design promotes 360-degree surround cooling.
Diagram showing key features of the docking station
Key features: Convenient (plug and play), Efficient (One Click Offline Copy), Intelligent (Mute Sleep), Practical (for 2.5/3.5 inches), Faster (USB 3.0), Safer (Good heat dissipation effect).
Diagram illustrating dual disk support for various drive sizes
The docking station supports various combinations of 2.5-inch and 3.5-inch hard drives, with a total capacity of up to 36TB.

3. Specifications

Attribute Value
Brand Name UnionSine
Model Number US-Z2
Supporting Hard Drive Capacity 16TB * 2 (Total 36TB)
External Interface USB 3.0
Internal Interface SATA
Size 2.5", 3.5"
Case Material Plastic
Plug Type EU Plug (Other plug types may be available depending on region)
Package Dimensions (L x W x H) 20 cm x 14 cm x 6 cm
Package Weight 0.482 kg

4. Package Contents

Please check the package contents upon receipt. The standard package includes:

  • UnionSine Dual Bay HDD Docking Station (US-Z2)
  • Power Adapter (12V/3A)
  • USB 3.0 Data Cable
  • User Manual (this document)

Note: Hard drives (HDD/SSD) are NOT included and must be purchased separately.

5. Setup Instructions

  1. Connect Power: Connect the provided 12V/3A power adapter to the DC 12V port on the back of the docking station and then to a power outlet.
  2. Insert Hard Drives: Gently insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the bays. Ensure they are seated firmly. The docking station supports any combination of two drives.
  3. Connect to Computer (for data transfer): Connect one end of the USB 3.0 data cable to the USB port on the docking station and the other end to an available USB 3.0 port on your computer.
  4. Power On: Press the Power switch on the docking station. The LED indicators will light up, indicating the device is ready for use.
Close-up of the docking station's interfaces and indicator lights
Detail view of the anti-slip foot mats, running status indicator lights, and the Power, USB, and DC 12V interfaces.
Docking station connected to power with two hard drives
The docking station connected to a 12V/3A power adapter, ensuring stable power for up to 36TB of storage.

6. Operating Instructions

6.1. Data Transfer (Connected to Computer)

When connected to a computer via USB, the docking station functions as an external hard drive enclosure. You can access and transfer files between your computer and the inserted drives.

  1. Ensure the docking station is powered on and connected to your computer via the USB 3.0 cable.
  2. Your operating system should automatically detect the drives. They will appear as removable storage devices.
  3. You can now drag and drop files, copy, paste, or perform any other file management operations as you would with any external drive.
Docking station connected to a computer monitor, showing file transfer
High-speed data transfer via USB 3.0, capable of transferring 1GB files in approximately 3 seconds (up to 420MB/s).
Mobile phone connected to the docking station via OTG adapter
Mobile phones supporting OTG function can also read hard drive data by connecting through an OTG adapter.

6.2. Offline Clone Function

The offline clone function allows you to duplicate a source hard drive to a target hard drive without needing a computer. This is ideal for creating backups or upgrading drives.

Important Notes for Offline Cloning:

  • The capacity of the Target drive (Destination disk) must be equal to or larger than the Source drive (Original disk).
  • All data on the Target drive will be overwritten during the cloning process. Ensure you back up any useful data from the Target drive before proceeding.
  • Ensure the USB cable is disconnected from your computer before initiating an offline clone.

Steps for Offline Cloning:

  1. Prepare Drives: Insert the Source hard drive into the 'Source' bay (usually labeled 'A') and the Target hard drive into the 'Target' bay (usually labeled 'B').
  2. Set Clone Mode: Locate the 'PC / CLONE' switch on the back of the docking station and push it to the 'CLONE' side.
  3. Connect Power: Connect the power supply and press the 'POWER' switch to turn on the docking station.
  4. Start Cloning: Press and hold the 'START' button on the back of the docking station for 3 seconds.
  5. Monitor Progress: A blue LED indicator will flash at 25% to signal the start of the cloning process. The progress indicators (25%, 50%, 75%, 100%) will light up sequentially.
  6. Completion: The cloning process is complete when ALL LED lights (25%-100%) turn solid blue.
  7. Eject Drives: Once cloning is complete, press the 'POWER' switch to turn off the docking station, then safely eject your drives.
Diagram showing offline cloning from disk A to disk B
One-click offline cloning for easy backup, showing data flow from Source (A) to Target (B) drive.
Close-up of the docking station's LED indicators and clone button
Intelligent chip with real-time monitoring via LED indicators (25%, 50%, 75%, 100%) for cloning progress. Long press the copy button for 3 seconds to initiate cloning.

7. Maintenance

  • Always power off the docking station before removing or inserting hard drives to prevent data loss or damage.
  • Keep the device in a clean, dry environment, away from direct sunlight, heat sources, and liquids.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
  • Ensure proper ventilation around the docking station to facilitate heat dissipation.
Docking station with glowing blue lines indicating 360-degree cooling
The vertical design of the docking station provides 360-degree surround cooling for faster heat dissipation.

8. Troubleshooting

  • Device not recognized by computer:
    • Ensure the power adapter is securely connected and the docking station is powered on.
    • Check the USB cable connection to both the docking station and the computer. Try a different USB port or cable.
    • Ensure the hard drives are properly seated in the bays.
    • If using Windows, check Disk Management to see if the drive appears but needs initialization or formatting.
  • Offline cloning fails or doesn't start:
    • Verify that the USB cable is disconnected from the computer.
    • Ensure the 'PC / CLONE' switch is set to 'CLONE'.
    • Confirm that the Target drive's capacity is equal to or larger than the Source drive's capacity.
    • Make sure both drives are properly inserted and detected (LEDs should indicate activity).
    • Press and hold the 'START' button for the required 3 seconds.
  • Slow data transfer speeds:
    • Ensure you are connected to a USB 3.0 port on your computer. USB 2.0 ports will result in slower speeds.
    • Verify that your operating system and host controller support UASP for optimal performance.
    • Check the condition of your USB cable. A damaged or low-quality cable can affect speeds.
  • Hard drive not fitting:
    • This docking station supports standard 2.5-inch and 3.5-inch SATA HDDs/SSDs. Ensure your drive is of this type and size.

9. User Tips

  • Data Backup: Always back up critical data from your target drive before performing an offline clone, as the process will erase all existing data on the target drive.
  • Proper Ejection: When connected to a computer, always use the "Safely Remove Hardware" option before disconnecting the docking station or removing drives to prevent data corruption.
  • Cable Management: Use the provided high-quality USB 3.0 cable for optimal performance and to minimize interference.

10. Warranty and Support

UnionSine products are designed for reliability and performance. For any technical assistance, warranty claims, or product-related inquiries, please contact the seller or UnionSine customer support directly. Please retain your proof of purchase for warranty purposes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.