ANTUSI A2

Contents

ANTUSI A2 Bike/Motorcycle Alarm Security System User Manual

Multipurpose Vibration Motion Sensor Rechargeable Alert Device

1. Introduction

Thank you for choosing the ANTUSI A2 Bike/Motorcycle Alarm Security System. This device is designed to provide enhanced security for your bicycle, electric bicycle, motorcycle, or scooter with its vibration-sensing alarm, wireless remote control, and electric bell functions. Please read this manual thoroughly before use to ensure proper operation and maximize the product's lifespan.

Video: Product demonstration showing features and basic operation.

2. Package Contents

Ensure all items are present in your package:

  • 1x Electric Bell Unit (Alarm Host)
  • 1x Remote Control
  • 1x Tube-shaped bracket silica gel pad
  • 1x Host support
  • 1x Remote control bracket
  • 2x Cable ties
  • 1x Charging cable
  • Mounting screws
  • User Manual (PDF available online)
All components of the ANTUSI A2 alarm system laid out, including the alarm unit, remote, charging cable, and mounting hardware.

Image: All components included in the package.

3. Specifications

FeatureSpecification
Model NumberA2
TypeElectric Horn / Anti-theft Alarm
Brand NameANTUSI (also associated with CYCLAMI)
MaterialPC+ABS+Pure Copper
Net Weight66g
Dimensions46 x 43 x 41mm
Installation MethodCable tie + screw
Alarm Unit Battery Capacity400mAh (Rechargeable Lithium-ion)
Remote Control Battery12V/27A Alkaline Battery
Remote Control Distance10-80m (open area)
Sound Decibel105-115dB
Waterproof RatingIPX5
OriginMainland China

4. Setup

4.1 Charging the Alarm Unit

The alarm unit features a built-in 400mAh rechargeable lithium-ion battery. Connect the provided USB charging cable to the alarm unit's charging port and a suitable USB power source (e.g., car charger, power bank, computer USB, phone USB adapter). The blue LED indicators will show the charging status.

Close-up of the alarm unit showing the USB charging port and blue LED battery indicators.

Image: Alarm unit connected to a USB charging cable, showing blue LED indicators.

4.2 Remote Control Battery

The remote control uses a 12V/27A alkaline battery. This battery is not rechargeable. Replace it when the remote's performance degrades.

4.3 Installation of Alarm Unit (Host)

The alarm unit can be installed in various positions on your bike, electric bicycle, motorcycle, or scooter using the provided cable ties and mounting screws. Choose a discreet and secure location.

  1. Fix the host support to your desired location (e.g., seat post, frame, handlebar) using the cable ties. Ensure it is tight and stable.
  2. Insert the alarm unit into the fixed bracket.
  3. Tighten the thumbscrews to secure the alarm unit.
  4. To remove the host, turn the screw counter-clockwise.
Diagram showing installation steps for the remote control and the A2 host unit using cable ties and brackets.

Image: Installation steps for the remote control and alarm unit.

Alarm unit installed on a bicycle frame using cable ties.

Image: Alarm unit installed on a bicycle frame.

Alarm unit installed on a bicycle handlebar stem.

Image: Alarm unit installed on a bicycle handlebar stem.

Alarm unit installed under a bicycle seat.

Image: Alarm unit installed under a bicycle seat.

4.4 Installation of Remote Control

  1. The remote control bracket is fixed to the handlebar with a cable tie to facilitate thumb access.
  2. Just plug in the remote control.
  3. Press the bottom buckle to take out the remote control.

Reminder: After setting the anti-theft alarm on the bicycle, please carry the remote control with you.

Remote control installed on a scooter handlebar next to the display.

Image: Remote control installed on a scooter handlebar.

4.5 Pairing/Re-pairing Remote Control and Host

If the remote control does not work or you need to pair a new remote, follow these steps:

  1. Unpairing Connection: Press and hold the buzzer switch on the alarm unit. After the second sound, the pairing link is successfully released.
  2. Re-pairing Connection: Press and hold the buzzer switch on the alarm unit. After the first sound, press any button on the remote control to pair successfully. You will hear "Di, Di" indicating successful code matching.
Diagram showing the alarm unit and remote control with numbered buttons and their functions.

Image: Remote control and alarm unit with numbered features.

5. Operating Instructions

5.1 Power Display

Short press the power button on the alarm unit to display the current battery level via the blue LED indicators.

5.2 Arming/Disarming Alarm

Use the remote control to arm and disarm the anti-theft alarm function. Refer to the remote control diagram for specific buttons.

5.3 Vibration Sensitivity Adjustment

The alarm features 3 levels of vibration sensitivity: High, Medium, and Low. Adjust this setting via the remote control to suit your environment and prevent false alarms.

5.4 Volume Setting

The alarm has 3 levels of volume adjustment: High, Medium, and Low. This allows you to set the alarm loudness from 105dB up to 115dB.

Diagram showing sound waves emanating from the alarm unit, indicating 105-115dB loud volume to deter thieves.

Image: The alarm unit produces a loud volume to deter thieves.

5.5 Ringtone Selection (Electric Bell)

The device offers 5 different ringtones for the electric bell function. You can switch between these ringtones after canceling the alarm setting.

5.6 Find Bike Function

Even at night, you can use the remote control to locate your bike. The remote supports a range of up to 50 meters in open areas, and can even work through partition walls.

Diagram showing a remote control sending a signal through a wall to an alarm unit, indicating a 50-meter range in open areas.

Image: The 'Find Bike' function works up to 50 meters, even through walls.

6. Maintenance

6.1 Waterproofing

The alarm unit has an IPX5 waterproof structure, making it resistant to wind, rain, and snow. However, avoid submerging the device in water.

Close-up of the alarm unit with water droplets on its surface, illustrating its IPX5 waterproof structure.

Image: The alarm unit is IPX5 waterproof.

6.2 Material Care

The device is constructed from PC+ABS and pure copper materials. Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface.

6.3 Battery Life

The alarm unit's 400mAh battery, with power-saving technology, offers a standby time of 90-120 days and 30-90 days in alarm state. Recharge the unit when the battery indicator shows low power.

7. Troubleshooting

  • Remote Control Not Working: If the remote control fails to operate the alarm unit, try the re-pairing procedure described in Section 4.5.
  • Alarm Too Sensitive/Not Sensitive Enough: Adjust the vibration sensitivity setting (High, Medium, Low) via the remote control to match your needs and environment.
  • Alarm Too Loud/Quiet: Adjust the volume setting (High, Medium, Low) via the remote control.
  • Short Battery Life: Ensure the alarm unit is fully charged. Battery life can vary based on usage frequency and alarm triggers. The remote control battery (12V/27A alkaline) is not rechargeable and needs replacement when depleted.

8. User Tips

  • Battery Performance: The alarm unit's rechargeable battery offers excellent longevity, often lasting at least a month on a single charge under normal use.
  • Volume Control: The alarm is very loud (up to 115dB). Utilize the volume adjustment feature to reduce it if necessary, especially in quieter environments.
  • Optimal Installation: The sensitivity of the alarm is affected by its installation location. Experiment with different positions on your bike (e.g., frame, seat post) to find the best balance between security and preventing false alarms.
  • Remote Control: The wireless remote control is highly convenient for arming, disarming, and using the 'Find Bike' function. Remember that the remote control itself is not rechargeable and requires a 12V/27A alkaline battery.
  • Physical Silencing: Be aware that if a thief can physically access and hold the alarm unit, they might be able to muffle or silence it. Always combine the alarm with other security measures like a strong lock.
  • General Security: While this alarm provides excellent deterrence, it is always recommended to never leave your bike unattended for extended periods, especially in high-risk areas.

9. Warranty & Support

For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.