Hikvision DS-2DE2C400MWG-E

Contents

Hikvision DS-2DE2C400MWG-E 4MP Smart Hybrid Light PTZ Network Camera User Manual

Model: DS-2DE2C400MWG-E | Brand: Hikvision

1. Introduction and Overview

The Hikvision DS-2DE2C400MWG-E is a high-performance 4MP PTZ (Pan-Tilt-Zoom) Network Camera designed for advanced surveillance. It features Smart Hybrid Light technology, offering both IR and white light illumination for clear imaging in various conditions. With built-in human detection and auto-tracking lite, two-way audio capabilities, and robust IP66 weather resistance, this camera provides comprehensive security monitoring for indoor and outdoor environments.

Hikvision DS-2DE2C400MWG-E PTZ Network Camera front view
Figure 1: Front view of the Hikvision DS-2DE2C400MWG-E PTZ Network Camera, highlighting Smart Hybrid Light, built-in mic/speaker, human detection, auto-tracking, and 3-year warranty.
Hikvision PTZ Camera product packaging box
Figure 2: The Hikvision PTZ camera packaging box.

2. Key Features

  • High quality imaging with 4 MP resolution.
  • Support Human Detection and Auto-tracking Lite for intelligent monitoring.
  • Smart Hybrid Light: advanced technology with long range IR and white light illumination.
  • Hik-Connect cloud service and APP for remote management and viewing.
  • Built-in microphone and speaker for real-time two-way audio security.
  • Built-in memory card slot, supporting microSD/SDHC/SDXC cards up to 512 GB for local storage.
  • Water and dust resistant (IP66) for reliable outdoor performance.
Smart Hybrid Light technology diagram
Figure 3: Diagram illustrating the Smart Hybrid Light technology with different lighting modes (IR, White Light, Smart Mode).
Auto-tracking Lite feature diagram
Figure 4: Diagram showing the auto-tracking lite feature, demonstrating how the camera follows detected human movement.

3. Specifications

Refer to the table below for detailed technical specifications of the DS-2DE2C400MWG-E camera.

CategoryItemDescription
CameraImage Sensor1/3" Progressive Scan CMOS
Max. Resolution2560 x 1440
Min. IlluminationColor: 0.01 Lux @ (F2.0, AGC ON), B/W: 0.005 Lux @ (F1.6, AGC ON), 0 Lux with light
LensFocal Length2.8 mm, 4 mm
FOV2.8 mm: horizontal FOV 94°, vertical FOV 49°, diagonal FOV 114°
4 mm: horizontal FOV 70°, vertical FOV 35°, diagonal FOV 85°
ApertureF1.6
IlluminatorSupplement Light TypeIR, White Light
Supplement Light RangeWhite light distance: up to 30 m, IR distance: up to 30 m
IR Wavelength850 nm
PTZMovement Range (Pan)0° to 345°
Movement Range (Tilt)0° to 80°
Pan SpeedUp to 25°/s
Tilt SpeedUp to 20°/s
VideoMain Stream50 Hz: 20 fps (2560 × 1440, 1920 × 1080, 1280 × 720)
60 Hz: 20 fps (2560 × 1440), 20 fps (1920 × 1080, 1280 × 720)
Sub-Stream50 Hz: 25 fps (1280 × 720, 640 × 480, 640 × 360)
60 Hz: 24 fps (1280 × 720, 640 × 480, 640 × 360)
Video CompressionH.265, H.264, MJPEG
Video Bit Rate32 Kbps to 8 Mbps
H.265 TypeBaseline profile, Main profile, High profile
H.264 TypeMain profile
AudioAudio CompressionG.711/G.722.1/G.726/MP2L2/PCM/AAC-LC
Audio Bit Rate16 Kbps (G.722.1)/64 Kbps (G.711)/32 to 192 Kbps (MP2L2)/16 Kbps (G.726)/16 to 64 Kbps (AAC-LC)/8 to 48 Kbps (PCM)
Audio Sampling Rate8 kHz, 16 kHz
Environment Noise FilteringYes
NetworkProtocolsIPv4/IPv6, HTTP, HTTPS, QoS, FTP, SMTP, UPnP, DNS, NTP, RTSP, RTCP/IP, UDP, DHCP, Bonjour
APIONVIF (Profile S, Profile G, Profile T), ISAPI, SDK, ISUP
InterfaceEthernet Interface1 RJ45 10 M/100 M self-adaptive Ethernet port
Built-in Microphone1 built-in microphone
On-board StorageBuilt-in memory card slot, support microSD/SDHC/SDXC card, up to 512 GB
Built-in Speaker1 built-in speaker
EventBasic EventMotion detection (support alarm triggering by specified target type (human)), video tampering alarm, exception
LinkageUpload to FTP/memory card, notify surveillance center, send email, trigger capture, audible warning, auto-tracking lite
GeneralPower12 VDC ± 25%, 0.75 A, max. 9 W, Ø5.5 mm coaxial power plug, reverse polarity protection
PoE: IEEE 802.3af, 36 V to 57 V, 0.2 A to 0.3 A, max. 10.5 W
DimensionCamera dimension: 163.9 mm × 185.8 mm × 131.9 mm (6.45" × 7.31" × 5.19")
With package dimension: 224 mm × 164 mm × 230 mm (8.82" × 6.46" × 9.06")
WeightCamera weight: 600 g (1.32 lb.)
With package weight: 900 g (2.0 lb.)
MaterialPlastic
Operating Condition-10 °C to 40 °C (-14 °F to 104 °F), Humidity 90% or less (non-condensing)
General FunctionMirror, password protection, watermark
ProtectionIP66 (IEC 60529-2013)
ApprovalEMCCE-EMC (EN 55032: 2015, EN 61000-3-2: 2019, EN 61000-3-3: 2013 + A1: 2019, EN 50130-4: 2011 + A1: 2014)
SafetyCB (IEC 62368-1: 2014 + A11), CE-LVD (EN 62368-1: 2014/A11: 2017)
EnvironmentCE-RoHS (2011/65/EU), Reach (Regulation (EC) No 1907/2006)
CertificationsCE, FCC, RoHS, UL, KC, WEEE
Typical ApplicationLevelDescription
Top-level protectionHikvision products at this level are equipped for use in areas where professional anti-corrosion protection is a must. Typical application scenarios include coastlines, docks, chemical plants, and more.
Moderate protectionHikvision products at this level are equipped for use in areas with moderate anti-corrosion demands. Typical application scenarios include coastal areas about 2 kilometers (1.24 miles) away from coastlines, as well as areas affected by acid rain.
No specific protectionHikvision products at this level are equipped for use in areas where no specific anti-corrosion protection is needed.

4. Setup and Installation

4.1 Unpacking

Carefully remove the camera and all accessories from the packaging. Inspect for any signs of damage. Keep the packaging for future transport or storage.

4.2 Powering the Camera

The camera supports two power options:

  • Power over Ethernet (PoE): Connect an Ethernet cable from a PoE-enabled switch or injector to the camera's RJ45 port. The camera complies with IEEE 802.3af Class3.
  • 12 VDC Power Adapter: Connect a 12 VDC ± 25% power adapter (0.75 A, max. 9 W) to the camera's Ø5.5 mm coaxial power plug. Ensure the power source has reverse polarity protection.

4.3 Network Connection

Connect the camera to your network using a standard RJ45 Ethernet cable. The camera features a 10 M/100 M self-adaptive Ethernet port.

4.4 Mounting and Positioning

The camera is designed for 'Normal' installation and is IP66 rated, making it suitable for both indoor and outdoor use. Ensure the mounting surface is strong enough to support the camera's weight (600g / 1.32 lb). The camera offers a Pan movement range of 0° to 345° and a Tilt movement range of 0° to 80° for flexible positioning.

Important: Remove the protective film from the camera lens after installation.

5. Operating Instructions

5.1 Initial Setup and Network Access

After connecting the camera to power and network, use Hikvision's client software (e.g., SADP Tool) to discover the camera on your network, activate it by setting a strong password, and configure its IP address. Refer to the Hikvision official documentation for detailed software setup guides.

5.2 Remote Management via Hik-Connect App

Download the Hik-Connect app (available for Android and iOS) to your mobile device. Register an account and add your camera using its serial number or QR code for remote viewing, control, and management.

5.3 PTZ Control

Through the Hik-Connect app or client software, you can remotely control the camera's pan (0° to 345°) and tilt (0° to 80°) movements. The camera supports pan speeds up to 25°/s and tilt speeds up to 20°/s.

5.4 Two-Way Audio

Utilize the built-in microphone and speaker for real-time two-way audio communication. This feature allows you to listen to the camera's environment and speak through the camera.

5.5 Smart Hybrid Light

The camera's Smart Hybrid Light system automatically switches between IR (infrared) and white light illumination based on detected events or configured schedules. This ensures clear images in low-light conditions and can deter intruders with visible light.

5.6 Human Detection and Auto-tracking Lite

Enable human detection to trigger alarms and recordings only when a human figure is identified. The auto-tracking lite feature allows the camera to automatically follow detected human movement within its field of view.

5.7 On-board Storage

Insert a microSD/SDHC/SDXC card (up to 512 GB) into the camera's memory card slot for local video recording and event storage. Ensure the card is formatted correctly via the camera's interface.

5.8 Alarm Actions and Linkage

Configure various alarm actions such as uploading photos to FTP/memory card, notifying a surveillance center, sending email alerts, triggering capture, audible warnings, and initiating auto-tracking lite upon event detection (e.g., motion detection, video tampering).

5.9 Image Settings

Adjust image parameters like saturation, brightness, contrast, and sharpness using the client software or web browser interface to optimize video quality for your specific environment.

5.10 General Functions

The camera supports general functions such as image mirroring, password protection for security, and watermarking for video authenticity.

6. Maintenance

6.1 Cleaning

Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water. Avoid harsh chemicals or abrasive materials that could damage the lens or finish.

6.2 Environmental Conditions

Ensure the camera operates within its specified environmental conditions: operating temperature of -10 °C to 40 °C (-14 °F to 104 °F) and humidity 90% or less (non-condensing). While IP66 rated for water and dust resistance, extreme conditions outside these ranges may affect performance or longevity.

6.3 Firmware Updates

Periodically check the Hikvision official website for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance, security, and access to new features.

7. Troubleshooting

7.1 No Power/Camera Not Turning On

  • Verify power connections for both 12VDC adapter or PoE.
  • Ensure the power source is active and providing the correct voltage/current.
  • If using PoE, confirm the PoE switch/injector is functioning correctly and supports IEEE 802.3af.

7.2 No Network Connection/Cannot Access Camera

  • Check the Ethernet cable connection at both ends.
  • Confirm network settings (IP address, subnet mask, gateway) are correct and not conflicting with other devices.
  • Ensure your firewall is not blocking communication to/from the camera.
  • Use the SADP Tool to verify the camera's IP address and status.

7.3 Poor Image Quality

  • Clean the camera lens for any dirt or smudges.
  • Check network bandwidth; insufficient bandwidth can lead to choppy or low-quality video.
  • Adjust image settings (brightness, contrast, sharpness) via the client software.
  • Ensure adequate lighting in the surveillance area, or verify Smart Hybrid Light functionality.

7.4 PTZ Control Not Responding

  • Verify network connectivity to the camera.
  • Ensure the control software/app is up-to-date.
  • Check if the camera is in a preset tour or auto-tracking mode that might override manual control.

8. User Tips

No specific user tips were available from buyer reviews or Q&A for this product at this time. For best performance, ensure stable network connectivity and proper power supply.

9. Warranty and Support

9.1 Warranty Information

This Hikvision camera typically comes with a 3-year warranty. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the official Hikvision warranty policy or contact your seller.

9.2 Certifications

The product complies with various international standards, including CE, FCC, RoHS, UL, KC, and WEEE, ensuring its safety and environmental compliance.

9.3 Technical Support

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact your authorized Hikvision dealer or visit the official Hikvision support website. Have your camera's model number (DS-2DE2C400MWG-E) and serial number ready when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.