MAMSM PSA-RZ-01

Contents

MAMSM Car Radio Canbus Box Adaptor Instruction Manual

Model: PSA-RZ-01 (Compatible variants include PSA-XB-02)

For Peugeot 408 (2012-2020) and Peugeot 308 (2007-2015)

1. Introduction

This manual provides detailed instructions for the installation and operation of the MAMSM Car Radio Canbus Box Adaptor. This device is designed to integrate aftermarket Android car radio systems with the existing electrical systems of compatible Peugeot vehicles, enabling seamless communication and functionality such as steering wheel controls and vehicle information display.

2. Safety Information

  • Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and damage.
  • Ensure all connections are secure and properly insulated to avoid electrical hazards.
  • Do not attempt to modify the Canbus box or wiring harness. Unauthorized modifications can lead to malfunction or damage.
  • If you are unsure about any step of the installation process, consult a qualified professional.
  • Keep the product away from water and excessive heat.

3. Package Contents

Verify that all items are present in your package:

  • MAMSM Canbus Box Adaptor (Model PSA-RZ-01 or PSA-XB-02)
  • 16-PIN Power Cable / Wiring Harness
MAMSM Canbus Box and Wiring Harness Overview

Figure 1: Overview of the MAMSM Canbus Box Adaptor and included wiring harness.

4. Specifications

FeatureSpecification
TypeCanbus Box / Cable
Compatible VehiclesPeugeot 408 (2012-2020), Peugeot 308 (2007-2015)
CANbus Box BrandRaise (RZC)
CANbus Box ModelPSA-RZ-01 (and PSA-XB-02 variant)
Main Power Line Interface16-PIN
Item Weight0.5kg
Voltage12 V
OriginMainland China
InterfaceAV-Out
Item TypeCables, Adapters & Sockets

5. Setup and Installation

The installation process involves connecting the Canbus box and wiring harness to your vehicle's existing wiring and your Android head unit. This product is designed for plug-and-play installation without the need to cut original vehicle wires.

5.1 Wiring Connection

The harness is designed to meet the standard pin definition for common public car Android solutions, with a 16-pin main power line interface. Connect the harness to your Android head unit and the vehicle's wiring according to the diagram below.

Wiring Definition Diagram for 16-pin connector

Figure 2: Detailed wiring definition diagram for the 16-pin connector. Ensure connections match this diagram for proper functionality.

5.2 Android Host Configuration

After physically connecting the hardware, you must configure your Android head unit:

  1. Enter the factory settings menu of your Android host.
  2. Navigate to the car bus configuration menu.
  3. Select the corresponding CANbus brand (Raise/RZC) and model (PSA-RZ-01 or PSA-XB-02) from the available options.
  4. It is recommended to update the latest MCU (Microcontroller Unit) and configuration file for your Android host when connected to Wi-Fi to ensure optimal compatibility and performance.

Note: Installation under the guidance of professionals or experienced individuals is highly recommended to avoid potential issues.

This Canbus box is recommended for use with Android hosts utilizing mainstream solutions such as Topway, xyauto, or nowada ftytek. Be aware that some decoders may only be compatible with products from designated solution providers; refer to any special instructions provided by your Android host manufacturer.

6. Operating Instructions

Once the MAMSM Canbus Box Adaptor is correctly installed and configured, it will facilitate communication between your vehicle's internal systems and your Android head unit. This enables various functionalities, which may include:

  • Steering wheel control integration for audio and navigation functions.
  • Display of vehicle information (e.g., door status, climate control, parking sensor data) on the Android screen, depending on the Android host's capabilities and vehicle features.
  • Automatic power on/off with vehicle ignition.

Specific operational details will depend on the features supported by your Android head unit and your vehicle's original system.

7. Maintenance

The MAMSM Car Radio Canbus Box Adaptor is designed to be maintenance-free. To ensure its longevity and proper function:

  • Keep the connections clean and free from dust or moisture.
  • Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
  • Do not attempt to open or repair the Canbus box yourself.

8. Troubleshooting

If you encounter issues after installation, consider the following troubleshooting steps:

  • No Power to Android Unit: Verify all power connections are secure. Check vehicle fuses.
  • Canbus Functions Not Working (e.g., Steering Wheel Controls):
    1. Ensure the correct CANbus brand (Raise/RZC) and model (PSA-RZ-01 or PSA-XB-02) are selected in your Android host's factory settings.
    2. Confirm that your Android host's MCU and configuration files are up to date.
    3. Check the wiring harness connections for any loose or incorrect pins.
  • Intermittent Functionality: This could indicate a loose connection. Re-check all wiring.
  • Compatibility Issues: Ensure your Android head unit is compatible with the specified CANbus protocols and solution providers (e.g., Topway, xyauto, nowada ftytek).

If problems persist after attempting these steps, it is advisable to consult a professional car audio installer or contact the seller for further assistance.

9. User Tips

  • Before purchasing, confirm the exact model of your Peugeot vehicle and its year to ensure compatibility with the PSA-RZ-01 or PSA-XB-02 Canbus box.
  • Always perform a continuity check on your wiring connections if you suspect an issue, especially if the Android unit is not powering on or Canbus features are absent.
  • Take photos of your original wiring before disconnecting anything, which can be helpful for reference during installation.

10. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact your original seller or retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.