1. Introduction
The BIGTREETECH Panda Lux LED Light Bar is an upgrade kit designed to significantly enhance the lighting within the print area of your Bambulab 3D printer. This high-brightness LED strip allows for clearer monitoring of the printing process and easier identification of potential issues. It features magnetic installation for ease of use and is compatible with the original printer screen controls.
2. Safety Information
- Ensure the printer is powered off and unplugged before installation.
- Handle the LED strip and components with care to avoid damage.
- Do not exceed the specified current draw (0.3A) for the light bar connector.
- Keep away from water or excessive moisture as the product is not waterproof.
- This product is designed for specific Bambulab 3D printer models. Using it with incompatible devices may cause damage.
3. Package Contents
Please verify that all components are present and undamaged upon unboxing.
3.1 For Bambulab X1/P1 Series
- Panda Lux LED Strip x1
- Connection Cable x1
- Adapter Board x1
- Electrical Tape x1
- Double-sided Tape x4
Note: The Panda Lux draws 0.3A from the light bar connector. Plugging in both the Panda Lux and the stock light bar is not recommended as the total current draw will exceed this. The Panda Lux is significantly brighter than the stock LED bar.
3.2 For Bambulab A1/A1 mini Series
- Panda Lux A1/A1 mini LED Strip x1
- Zip Ties x2
- Acetate Cloth Tape x1 piece
4. Setup and Installation
The Panda Lux LED Light Bar features tool-free magnetic installation for a quick and easy upgrade.
4.1 General Installation Steps (Refer to video for visual guide)
- Power Off: Ensure your 3D printer is completely powered off and unplugged from the mains.
- Prepare LED Strip: Carefully peel off the protective backing from the adhesive side of the LED strip.
- Positioning: Align the LED strip within the print chamber, typically along the top gantry or a suitable magnetic surface. The magnetic backing will help secure it in place.
- Connect Cable: Connect the LED strip's cable to the printer's original light-bar connector.
- Cable Management: Use the provided zip ties or acetate cloth tape to neatly manage and secure the cable, preventing it from interfering with printer movement.
- Power On: Once installed, plug in and power on your 3D printer.
4.2 Specific Notes for X1/P1 Series
- The LED strip is designed for magnetic mounting.
- Connects directly to the printer's original light-bar connector.
- Ensures precision printing without interfering with the lidar function.
4.3 Specific Notes for A1/A1 mini Series
- Features peel-and-stick installation.
- Compatible with the original screen control for seamless operation.
5. Operating Instructions
Once installed, the Panda Lux LED Light Bar integrates with your Bambulab 3D printer's existing controls.
- Power Control: For Bambulab A1/A1 mini series, the LED light can be seamlessly powered on/off with a single touch via the printer's original screen.
- Illumination: The high-brightness LEDs provide clear illumination of the print bed, allowing for better observation of your prints.
6. Maintenance
- Cleaning: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners directly on the LEDs.
- Inspection: Periodically check the adhesive and cable connections to ensure they remain secure.
- Heat: The LED strip is heat-resistant, but ensure proper ventilation around your printer to maintain optimal operating temperatures.
7. Troubleshooting
- LEDs not lighting up:
- Check if the printer is powered on.
- Verify that the LED strip cable is securely connected to the printer's light-bar connector.
- Ensure the LED light is enabled via the printer's control screen (if applicable).
- Light flickering:
- Check for loose connections.
- Ensure the power supply to the printer is stable.
- Adhesive losing grip:
- Clean the mounting surface thoroughly before re-applying.
- Use additional double-sided tape or zip ties for extra security if needed.
8. Specifications
8.1 General Specifications
| Feature | Detail |
|---|---|
| Brand Name | BIGTREETECH |
| Model Number | Panda Lux |
| Item Type | Hardware Parts / Machine Parts |
| Feature | LED Light Bar |
| Installation | Magnetic / Peel and Stick |
| Waterproof | No |
| Lifespan | Up to 36,000 Hours |
8.2 Bambulab X1/P1 Series Specifics
| Specification | Value |
|---|---|
| Compatible with | Bambulab X1/P1 Series Printers |
| Housing Material | Aluminum Alloy |
| Voltage | 5V |
| Max Current | 0.3A |
| Color Temperature | Pure White; 6000K |
| Cable Length | 100mm |
| Dimensions (L x W x H) | 273mm x 23mm x 10.8mm (10.75in x 0.91in x 0.43in) |
8.3 Bambulab A1/A1 mini Series Specifics
| Specification | Value |
|---|---|
| Compatible with | Bambulab A1/A1 mini 3D Printers |
| Material | Heat-resistant, flexible LED strip |
| Color Temperature | 6500K |
| A1 LED Strip Cable Length | 780mm (30.71in) |
| A1 mini LED Strip Cable Length | 480mm (18.90in) |
| A1 LED Strip Length | 290mm (11.42in) |
| A1 mini LED Strip Length | 185mm (7.28in) |
9. User Tips
- For optimal visibility, ensure the LED strip is positioned to minimize shadows on the print bed.
- When installing, clean the surface thoroughly with isopropyl alcohol to ensure maximum adhesion of the tape.
- Utilize the printer's screen controls to manage the light, integrating it seamlessly into your printing workflow.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact BIGTREETECH customer service through their official channels. Keep your purchase receipt as proof of purchase.
