1. Introduction
This manual provides essential information for the safe and effective use, installation, and maintenance of your HUTT DDC55, DDC51, or DDC5 Window Cleaning Robot Replacement Battery. Please read this manual thoroughly before using the product.
Note: Due to different production batches, the packaging, appearance, and style of the battery kit may vary slightly. The actual goods received shall prevail, and this does not affect the quality or functionality of the product.
2. Safety Information
⚠️ KEEP OUT OF REACH OF CHILDREN
In case of ingestion, seek medical attention immediately.
- Do not disassemble, crush, or puncture the battery.
- Do not expose the battery to high temperatures (above 60°C / 140°F) or direct sunlight.
- Do not short-circuit the battery terminals.
- Do not immerse the battery in water or other liquids.
- Use only the charger specified for your HUTT window cleaning robot.
- Dispose of used batteries according to local regulations.
- If the battery shows signs of damage, swelling, or leakage, discontinue use immediately and dispose of it safely.
3. Product Overview
This replacement battery is designed to power your HUTT DDC55, DDC51, or DDC5 Window Cleaning Robot, ensuring optimal performance and extended operating time.
4. Specifications
| Feature | Detail |
|---|---|
| Brand | HUTT |
| Compatibility | HUTT DDC55, DDC51, DDC5 Window Cleaning Robots |
| Rechargeable | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
| Certification | CE |
5. Setup and Installation
Follow these general steps to replace the battery in your HUTT Window Cleaning Robot. Refer to your specific robot model's user manual for detailed instructions on accessing the battery compartment.
- Power Off: Ensure your HUTT Window Cleaning Robot is completely powered off and disconnected from any power source.
- Locate Battery Compartment: Identify and open the battery compartment on your robot. This usually involves unscrewing a cover or releasing a latch.
- Disconnect Old Battery: Carefully disconnect the old battery's connector from the robot's main board. Note the orientation of the connector.
- Remove Old Battery: Gently remove the old battery from its compartment.
- Insert New Battery: Place the new HUTT replacement battery into the compartment, ensuring it fits snugly.
- Connect New Battery: Connect the new battery's connector to the robot's main board, matching the orientation noted earlier.
- Secure Compartment: Close and secure the battery compartment cover.
- Initial Charge: It is recommended to fully charge the new battery before its first use.
6. Operation
Once the new battery is installed and fully charged, your HUTT Window Cleaning Robot should operate as expected. Refer to your robot's specific user manual for operational instructions.
- Charging: Connect your robot to its original charger. The charging indicator on the robot will typically show the charging status.
- Battery Life: Battery life will vary depending on usage patterns and the condition of the robot.
- Storage: If storing the robot for an extended period, ensure the battery is charged to approximately 50-60% to prolong its lifespan.
7. Maintenance and Care
Proper care of your battery can extend its lifespan and ensure consistent performance.
- Regular Charging: Avoid completely draining the battery frequently. Recharge it after each use or when the robot indicates low battery.
- Temperature: Operate and store the battery within recommended temperature ranges (typically 0°C to 40°C / 32°F to 104°F). Extreme temperatures can degrade battery performance and lifespan.
- Cleaning: Keep the battery and its contacts clean and dry. Use a soft, dry cloth to wipe away any dust or debris.
- Inspection: Periodically inspect the battery for any physical damage, swelling, or corrosion. If any issues are found, replace the battery.
8. Troubleshooting
If you encounter issues with your replacement battery, consider the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Loose connection, faulty charger, or battery issue. | Ensure the battery is correctly installed and the charger is properly connected. Try a different power outlet. If the issue persists, the charger or battery may be faulty. |
| Short operating time | Battery not fully charged, aged battery, or high power consumption by robot. | Ensure the battery is fully charged. If the battery is old, its capacity may have degraded, requiring replacement. Check robot settings for power-saving modes. |
| Robot not powering on | Battery not installed correctly, completely discharged, or faulty. | Verify battery installation and connection. Attempt to charge the battery for several hours. If still unresponsive, the battery may be faulty. |
If troubleshooting steps do not resolve the issue, please contact customer support.
9. User Tips
While specific user feedback is not available, here are some general tips for maximizing the performance and lifespan of your rechargeable battery:
- Avoid Deep Discharges: Try to recharge the battery before it completely runs out of power.
- Moderate Temperatures: Use and store the battery in a cool, dry place away from extreme heat or cold.
- Use Original Charger: Always use the charger provided with your HUTT robot to ensure compatibility and prevent damage.
- Regular Use: If possible, use your robot regularly. Long periods of inactivity can sometimes affect battery health.
10. Warranty and Support
For any questions, concerns, or issues regarding your HUTT replacement battery, please contact the seller or manufacturer as soon as possible. They will provide you with a satisfactory solution, and all your questions will be answered within 24 hours.
Please have your purchase details and product model information ready when contacting support.
