1. Introduction
The Aigo B75M Motherboard is a high-performance mainboard designed for desktop computers, supporting Intel LGA 1155 socket processors. It features an Intel B75 chipset, dual-channel DDR3 memory support, and a range of connectivity options including M.2 NVMe, SATA2.0, and USB 3.0. This motherboard is suitable for various applications, from gaming and multimedia to office work and video production.

2. Specifications
Below are the detailed technical specifications for the Aigo B75M Motherboard:
| Feature | Specification |
|---|---|
| Mainboard Architecture | MATX |
| Applicable Type | Desktop Computer |
| Chipset Manufacturer | Intel |
| Chipset | Intel B75 |
| CPU Socket | LGA 1155 |
| Processor Compatibility | Intel Core i3, i5, i7 (2nd/3rd Gen) and other LGA 1155 processors |
| With CPU | No (CPU sold separately) |
| Mainboard Size | 175mm x 225mm |
| Memory Slots | 2 x DDR3 DIMM |
| Support Memory Type | DDR3 |
| Memory Channel | Dual Channel |
| Maximum RAM Capacity | 16 GB |
| Memory Frequency | 1066/1333/1600MHz |
| Graphics Card Slot | 1 x PCI-E 16x |
| Number of PCIe x 16 | 1 |
| Number of PCI | 0 |
| PCI - E Standards | PCI-E 3.0 |
| Storage Interface Type | M.2 (NVMe) |
| Expansion Interface | 1 x HDMI-compatible, 1 x VGA, 1 x DVI, 1 x NVME_ M.2 |
| SATA Interface | 4 x SATA2.0 |
| Onboard LAN | 1x RJ45, Realtek 1000Mbit RTL8111 |
| Number of Network Cards | 1 |
| Back I/O Ports | 1x RJ45, VGA (D-Sub), PS/2 Combo, 3 x Audio Jacks, 2x USB 3.2/3.1 Gen 1, 4 x USB 2.0, HDMI 1.4, DVI-D |
| USB Interface | 4 x USB2.0, 2 x USB3.0 |
| Power Interface | 4+4PIN (CPU) + 1 x 24Pin (Motherboard) |
| Power Phases | 3 Phases |
| Fan Interface | 2 x Fan pins |
| Sound Card | Realtek ALC662 5.1 high-definition audio interface |
| Usage Scenario | Gaming, Audio & Video, Office, Video Production, Workstation |
| RAID Supported | No |

3. Package Contents
The retail package typically includes the following items:
- Aigo B75M Motherboard unit
- I/O Shield
- SATA cables (quantity may vary)
- User Manual / Quick Start Guide (this document)

4. Setup Instructions
Before proceeding with installation, ensure your power supply is sufficient (at least 500W recommended). It is crucial to test the motherboard and its components outside the PC case before final installation to avoid potential damage or compatibility issues.

4.1. CPU Installation
- Locate the LGA 1155 CPU socket on the motherboard.
- Open the CPU socket lever and lift the metal retention plate.
- Carefully align the CPU with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Do not force the CPU into place.
- Gently lower the CPU into the socket.
- Close the metal retention plate and secure it with the lever.
- Apply a thin layer of thermal paste to the CPU and install the CPU cooler.

4.2. RAM Installation
- Locate the two DDR3 DIMM slots.
- Open the clips at both ends of the memory slot.
- Align the memory module with the slot, ensuring the notch on the module matches the key in the slot.
- Press down firmly on both ends of the memory module until the clips snap into place.
- For dual-channel performance, install memory modules in both slots.

4.3. Storage Device Installation
M.2 NVMe SSD
- Locate the M.2 NVMe slot on the motherboard.
- Remove the M.2 standoff screw.
- Insert the M.2 SSD into the slot at a 30-degree angle.
- Gently push down the SSD and secure it with the standoff screw.

SATA Drives
- Connect one end of the SATA data cable to a SATA2.0 port on the motherboard.
- Connect the other end of the SATA data cable to your HDD or SSD.
- Connect a SATA power cable from your power supply to the HDD/SSD.
4.4. Expansion Card Installation (PCI-E)
- Locate the PCI-E x16 slot for your graphics card or PCI-E x1 slot for other expansion cards.
- Align the card with the slot and press down firmly until it is securely seated.
- Secure the card with a screw to the PC case.

4.5. Power Connections
- Connect the 24-pin ATX power connector from your power supply to the main 24-pin power socket on the motherboard.
- Connect the 8-pin (or 4+4-pin) CPU power connector from your power supply to the 8-pin CPU power socket near the CPU.
4.6. Front Panel Connections
Refer to Figure 4 for the exact location of these headers. Connect the cables from your PC case to the corresponding headers on the motherboard:
- Power Switch (PWR SW): Connects to the case's power button.
- Reset Switch (RESET SW): Connects to the case's reset button.
- Power LED (PLED): Connects to the case's power indicator light.
- HDD LED (HDD LED): Connects to the case's hard drive activity indicator light.
- Front USB 2.0/3.0: Connects to the case's front USB ports.
- Front Audio: Connects to the case's front audio jacks.
4.7. Rear I/O Connections
Connect your peripherals to the appropriate ports on the rear I/O panel:
- PS/2 Combo Port: For legacy keyboard or mouse.
- VGA (D-Sub), HDMI, DVI-D: For display output.
- USB 2.0 Ports: For general USB devices.
- USB 3.0 Ports: For high-speed USB devices.
- RJ45 LAN Port: For network connection.
- Audio Jacks: For speakers, headphones, and microphone.

5. Operating Instructions
5.1. Initial Boot and BIOS Setup
After assembling your system, connect a monitor, keyboard, and mouse. Power on your computer. During startup, repeatedly press the 'DEL' or 'F2' key (common keys, may vary) to enter the BIOS/UEFI setup utility. Here you can configure boot order, system time, and other hardware settings. Save changes and exit to boot into your operating system installer.
5.2. Driver Installation
Once your operating system is installed, you will need to install the necessary drivers for optimal performance. These typically include:
- Chipset Drivers
- LAN (Network) Drivers
- Audio Drivers
- Graphics Drivers (if using a dedicated graphics card)
Drivers are usually available on the manufacturer's website or included on a driver CD/USB with your components.
6. Maintenance
6.1. Cleaning
Regularly clean your computer's interior to prevent dust buildup, which can lead to overheating and reduced performance. Use compressed air to remove dust from fans, heatsinks, and motherboard components. Ensure the system is powered off and unplugged before cleaning.
6.2. BIOS Updates
Periodically check the manufacturer's website for BIOS updates. BIOS updates can improve system stability, add support for new hardware, or fix bugs. Follow the instructions provided by the manufacturer carefully when updating the BIOS, as an incorrect update can render the motherboard inoperable.
7. Troubleshooting
This section addresses common issues you might encounter:
- No Power/No Boot: Ensure all power cables (24-pin ATX, 8-pin CPU) are securely connected. Verify your power supply unit (PSU) meets the minimum 500W requirement.
- No Display: Check monitor connections and ensure your graphics card (if installed) is properly seated and powered. If using integrated graphics, ensure your monitor is connected to the motherboard's video output (VGA, HDMI, DVI).
- Component Incompatibility: The motherboard may not be compatible with certain brands or versions of CPU, RAM, or M.2 SSDs. It is recommended to confirm compatibility with customer service before purchase.
- Battery Removed: Note that the CMOS battery may be removed before shipping due to postal regulations. You may need to install a CR2032 battery upon receipt.
- Physical Damage: The appearance and functionality of the motherboard should be checked immediately upon receipt. Installation into the computer case is considered acceptance of the product's condition; any damage occurring after installation may be considered artificial damage.
8. User Tips
- Power Supply: Always use a reliable power supply unit with at least 500W to ensure stable operation, especially when using a dedicated graphics card.
- Compatibility Check: Before purchasing additional components like CPU, RAM, or M.2 SSDs, double-check their compatibility with the Intel B75 chipset and LGA 1155 socket to avoid issues.
- Out-of-Case Testing: Perform an initial test of the motherboard with essential components (CPU, RAM, GPU, PSU) outside the PC case. This helps identify any 'Dead on Arrival' (DOA) components or compatibility problems before full assembly.
- Cable Management: Proper cable management improves airflow and makes future maintenance easier.
9. Warranty and Support
For warranty information and technical support, please refer to the official Aigo website or contact your point of purchase. Keep your proof of purchase for any warranty claims.