FEKER IK85

Contents

FEKER IK85 Hot Swappable Mechanical Keyboard User Manual

Model: IK85 | Brand: FEKER

Introduction

Thank you for choosing the FEKER IK85 Hot Swappable Mechanical Keyboard. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new keyboard. The IK85 is a wired mechanical keyboard featuring hot-swappable switches, white LED backlighting, and compatibility with both Windows and Mac operating systems, offering a customizable and responsive typing experience.

Setup

  1. Unpack the Keyboard: Carefully remove the keyboard and any accessories from its packaging.
  2. Connect the Cable: The FEKER IK85 is a wired-only keyboard. Connect the provided Type-C USB cable to the keyboard's port and then to an available USB port on your computer.
  3. System Compatibility: The keyboard is designed to work seamlessly with both Windows and Mac operating systems. No special drivers are typically required for basic functionality.
  4. Adjust Keyboard Feet: For ergonomic comfort, you can adjust the keyboard's tilt using the two-stage adjustable feet located on the underside of the keyboard. Choose from three different height settings.
    Close-up of the white IK85 keyboard showing adjustable feet support with three positions labeled 1, 2, and 3.
    Figure 1: Adjustable keyboard feet for ergonomic comfort.
  5. System Switch: Locate the system compatibility switch on the side or back of the keyboard. Ensure it is set to the correct operating system (Windows or Mac) for optimal key mapping.
    Close-up of the white IK85 keyboard showing a switch labeled 'Window/Mac system'.
    Figure 2: System compatibility switch for Windows/Mac.

Operating Instructions

Basic Usage

Once connected, your FEKER IK85 keyboard is ready for use. Simply begin typing. The keyboard features an 85-key layout, providing a compact yet functional experience.

White LED Backlighting

The keyboard is equipped with white LED backlighting. Specific key combinations (often involving the 'Fn' key) may be used to cycle through different lighting modes or adjust brightness. Refer to the keyboard's keycap legends for any dedicated lighting control functions.

Hot-Swappable Switches

The FEKER IK85 features hot-swappable switch sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel and sound. The keyboard supports both 3-pin and 5-pin switches, including OUTEMU Cyan (tactile) and FEKER Panda (linear) switches.

  1. Removing a Switch: Use a switch puller tool (not always included, but recommended) to gently grip the top and bottom clips of the switch. Pull straight up with even pressure until the switch detaches from the PCB. Avoid wiggling or twisting to prevent damage to the PCB socket.
  2. Installing a Switch: Align the pins of the new switch with the holes on the PCB. Ensure the switch is oriented correctly (the LED cutout on the switch should match the LED on the PCB). Gently push the switch straight down until it clicks into place. Do not force it; if resistance is met, check pin alignment. Bent pins can be carefully straightened with tweezers.
    Close-up of a white IK85 keyboard with several Outemu switches removed, showing the hot-swap sockets and loose switches.
    Figure 3: Hot-swappable sockets with Outemu switches.
    Close-up of a black IK85 keyboard with several Panda switches removed, showing the hot-swap sockets and loose switches.
    Figure 4: Hot-swappable sockets with Panda switches.

Maintenance

  • General Cleaning: Regularly dust your keyboard with compressed air to remove debris from between keycaps.
  • Keycap Cleaning: The keycaps are made of ABS plastic. They can be removed for deeper cleaning. Use a keycap puller to gently remove keycaps. Clean them with a mild soap solution and a soft cloth, then ensure they are completely dry before reattaching.
  • Switch Care: If switches feel gritty or inconsistent, they may benefit from lubrication. This is an advanced maintenance step and should only be attempted if you are comfortable with disassembling switches.
  • Cable Management: Avoid sharp bends or excessive pulling on the USB-C cable to prevent damage.

Troubleshooting

Keyboard Not Responding:
Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or a different cable if available. Restart your computer.
Specific Keys Not Working:
If a specific key is not registering, carefully remove its keycap and then the switch. Inspect the switch pins for any bends or damage. Reinsert the switch firmly. If the issue persists, try swapping the problematic switch with a known working switch from another key to determine if the issue is with the switch or the PCB socket.
LED Backlight Not Working:
Check if the backlight is simply turned off or set to the lowest brightness. Use the designated function keys (e.g., Fn + arrow keys) to adjust brightness or cycle through modes. Ensure the keyboard is properly powered via the USB connection.
Incorrect Key Output (Windows/Mac):
Verify that the Windows/Mac system compatibility switch on the keyboard is set to the correct operating system.

Specifications

Feature Detail
Brand FEKER (DJKD)
Model IK85
Connectivity Wired (Type-C USB)
Switches OUTEMU Cyan (Tactile, 3Pin, 50±10gf), FEKER Panda (Linear, 5Pin, 55±3gf)
Keycap Material ABS Plastic (OEM Profile)
Backlight Type Monochrome White LED
Hot-Swappable Yes
Keyboard Standard 85 Keys
Full Size Keyboard No
Wrist Support No
Interface Type USB
Application Desktop, Laptop, Number, Tablet
Language English
Origin Mainland China
Certifications CE, FCC, RoHS
Package Dimensions (L x W x H) 30 cm x 10 cm x 5 cm
Package Weight 1.0 kg

User Tips

  • Experiment with Switches: Since the IK85 is hot-swappable, don't hesitate to try different types of mechanical switches to find your preferred typing feel.
  • Use a Keycap Puller: Always use a proper keycap puller to remove keycaps to avoid damaging them or the switches.
  • Keep it Clean: Regular cleaning not only maintains aesthetics but also prevents dust and debris from affecting switch performance.
  • Firmware Updates: Check the manufacturer's website periodically for any available firmware updates that might improve performance or add new features.

Warranty and Support

For any technical assistance, warranty claims, or product-related inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty purposes. The product is certified with CE, FCC, and RoHS standards, ensuring compliance with relevant safety and environmental regulations.

© 2024 FEKER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.