ipega PG-SW107

Contents

IPEGA PG-SW107 RGB Switch Wall Mount with Joy-Con Charger

Model: PG-SW107 | Brand: ipega

Multi-functional Charging Station and Organizer for Nintendo Switch / Switch OLED

1. Introduction

The IPEGA PG-SW107 is a versatile accessory designed to enhance your Nintendo Switch or Switch OLED gaming experience. It functions as a wall-mounted or desktop stand, a charging station for Joy-Cons, and an organizer for various Switch accessories including Pro Controllers, game cards, and wrist straps. Featuring dynamic RGB lighting and convenient USB expansion ports, this unit helps keep your gaming area tidy and stylish.

IPEGA PG-SW107 RGB Switch Wall Mount with Joy-Con Charger, showing a Nintendo Switch console, Joy-Cons, and Pro Controllers organized and charging.

Image: The IPEGA PG-SW107 in use, organizing and charging a Nintendo Switch console, Joy-Cons, and Pro Controllers.

2. Package Contents

Please verify that all items listed below are included in your package:

  • Stand x 1
  • Wall Mounting Plates x 1
  • Pro Controller Holders x 2
  • Screw x 4
  • Screw Accessories x 4
  • Manual x 1
  • Gradienter x 1
  • Type-C Cable x 1

3. Specifications

Brand ipega
Model Number PG-SW107
Compatible Brand/Model Nintendo
Compatible Nintendo Models Nintendo Switch, Nintendo Switch OLED
Accessories Type Game Card Case / Multi-functional Stand
USB Ports 2x USB 2.0 expansion ports (for low-current charging and data transfer)
Joy-Con Charging Ports 4 ports with LED indicators (Red: Charging, Blue: Full)
RGB Lighting 15 modes (7 monochrome, 8 dynamic), with memory function
Storage Capacity 1 Switch/Switch OLED console, 6 Joy-Cons, 4 wrist straps, 10 game cards, 2 Pro controllers
Package Dimensions (L x W x H) 26 cm x 17 cm x 8 cm
Package Weight 0.639 kg

4. Setup Instructions

4.1 Wall Mounting Installation

  1. Choose a suitable location on your wall, ensuring it is sturdy enough to support the unit and your console/accessories.
  2. Use the provided Gradienter to ensure the Wall Mounting Plates are level.
  3. Mark the drilling points through the Wall Mounting Plates.
  4. Drill pilot holes at the marked points.
  5. Insert the Screw Accessories (wall anchors) into the drilled holes.
  6. Align the Wall Mounting Plates with the holes and secure them using the provided Screws.
  7. Attach the main Stand unit to the secured Wall Mounting Plates.
  8. Slide the two Pro Controller Holders into their designated slots on the bottom of the main unit.
IPEGA PG-SW107 RGB Switch Wall Mount installed on a wall, showcasing a fully organized gaming setup with Switch, Joy-Cons, and Pro Controllers.

Image: The IPEGA PG-SW107 mounted on a wall, providing an organized gaming setup.

4.2 Desktop Stand Setup

  1. Place the main Stand unit on a flat, stable surface. The unit is equipped with 4 anti-slip silicone pads for stability.
  2. Slide the two Pro Controller Holders into their designated slots on the bottom of the main unit.
Diagram illustrating the IPEGA PG-SW107's versatility as both a wall-mounted and desktop stand for Nintendo Switch and Switch OLED consoles, preventing loss.

Image: Diagram showing the wall-mounted and desktop configurations for Nintendo Switch and Switch OLED.

4.3 Power Connection

  1. Connect the provided Type-C Cable to the 'IN DC 5V/2A' port on the back of the stand.
  2. Connect the other end of the Type-C Cable to a suitable USB power adapter (not included) or a powered USB port.

5. Operating Instructions

5.1 Charging Joy-Cons

  • Insert up to four Joy-Cons into the dedicated charging ports on the stand.
  • The LED indicator for each Joy-Con will turn red while charging.
  • The LED indicator will turn blue when the Joy-Con is fully charged.
  • To turn off the charging function and use the unit as a stand only, press the charging button.
Close-up of the Joy-Con charging ports on the IPEGA PG-SW107, showing LED indicators for charging status (red for charging, blue for full) and dedicated storage.

Image: Close-up of Joy-Con charging ports with LED indicators (red for charging, blue for full).

5.2 Charging Pro Controllers and Other Devices

  • The stand features two USB 2.0 expansion ports.
  • Connect your Pro Controllers or other low-current USB devices (e.g., headphones, small accessories) to these ports using their respective USB cables.
  • These ports also support data transfer.
Diagram detailing the Pro grip storage and charging feature of the IPEGA PG-SW107, including 2 USB 2.0 expansion ports and cable management.

Image: Detail of Pro Controller storage and USB 2.0 expansion ports with cable management.

5.3 RGB Lighting Control

  • The stand offers 15 different RGB light modes: 7 monochrome and 8 dynamic.
  • Locate the 'Light switch' button on the unit.
  • Short press: Cycle through the different RGB light modes.
  • Long press (3 seconds): The lights will memorize the current setting and turn off. A subsequent short press will turn them back on to the last memorized setting.
Illustration of the 15 RGB light modes available on the IPEGA PG-SW107, including 8 dynamic and 7 fixed colors, with a light switch and memory function.

Image: Visual representation of the 15 RGB light modes and the light switch button.

5.4 Organizing Accessories

  • Nintendo Switch/OLED Console: Place the console securely in the central slot.
  • Joy-Cons: In addition to charging, the unit provides storage locations for up to six Joy-Cons.
  • Game Cards: Dedicated slots are available for up to 10 game cards.
  • Wrist Straps: Store up to 4 wrist strap pendants.
  • Pro Controllers: Hang up to two Pro Controllers on the removable holders.
Before and after comparison showing the powerful storage system of the IPEGA PG-SW107, organizing 6 Joy-Cons, 4 wrist straps, 10 game cards, and 2 Pro controllers.

Image: Before and after comparison demonstrating the effective organization provided by the stand.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe down the unit. Avoid using abrasive cleaners or solvents.
  • Dust: Regularly remove dust from charging ports and ventilation areas to ensure optimal performance.
  • Storage: If storing the unit for an extended period, ensure it is clean and dry, and store it in a cool, dry place away from direct sunlight.

7. Troubleshooting

7.1 Joy-Cons Not Charging

  • Ensure the main Type-C power cable is securely connected to both the stand and a working power source.
  • Verify that the Joy-Cons are correctly inserted into their charging slots.
  • Check if the charging function is enabled (the charging button should not be pressed to turn it off).
  • Try charging one Joy-Con at a time to isolate the issue.

7.2 RGB Lights Not Working

  • Confirm the unit is powered on and connected to a power source.
  • Short press the 'Light switch' button to cycle through modes.
  • If the lights were previously turned off by a long press, a short press should reactivate them to the last memorized setting.

7.3 Instability (Desktop Use)

  • Ensure the stand is placed on a completely flat and stable surface.
  • Check that the anti-slip silicone pads on the bottom of the unit are intact and clean.
  • Avoid placing excessive weight or unevenly distributing accessories on the stand.

7.4 Removing Wall Mount from Base

  • To remove the main stand unit from the wall mounting plates, gently lift or slide the unit upwards/outwards from the plates, depending on the specific locking mechanism. Refer to the installation steps in section 4.1 in reverse.

8. User Tips

  • Space Saving: Maximize your gaming space by utilizing the wall-mount feature, especially in smaller rooms or dedicated gaming setups.
  • RGB Customization: Experiment with the 15 RGB light modes to match your gaming mood or room aesthetic. Remember the long-press function to turn off the lights while retaining your preferred setting.
  • USB Port Utility: The two USB 2.0 ports are ideal for charging low-power accessories like wireless headset dongles or transferring small files, keeping your main console ports free.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.