IPEGA PG-SW107 RGB Wall Mount Charging Station User Manual

1. Introduction

The IPEGA PG-SW107 is a multi-functional RGB wall mount charging station designed for Nintendo Switch and Switch OLED consoles. This organizer provides a centralized solution for charging Joy-Cons, storing game cards, wrist straps, Pro controllers, and the console itself, while also offering customizable RGB lighting to enhance your gaming environment. It can be used as a wall-mounted unit or a desktop stand.

2. Features

• 4 Joy-Con Charging Slots: Equipped with individual LED indicators (Red for charging, Blue for fully charged).
• Charging Control: A dedicated button allows you to turn off the charging function, enabling use as a stand only.
• Expanded Connectivity: Features 2 additional USB 2.0 expansion ports for low-current charging and data transfer.
• Comprehensive Storage: Designed to store up to 6 Joy-Cons, 4 wrist straps, 10 game cards, 2 Pro controllers, and 1 Nintendo Switch/Switch OLED console.
• Integrated Cable Management: Pro controller holders include provisions for cable storage, reducing clutter.
• Stable Design: Utilizes plug-in storage for enhanced stability and space-saving compared to hanging storage.
• Dynamic RGB Lighting: Offers 15 distinct RGB light modes, including 7 monochrome and 8 dynamic effects, with a memory function to recall your last setting.
• Versatile Placement: Can be securely wall-mounted or used as a stable desktop stand.
• Enhanced Stability: Features 4 anti-slip silicone pads for secure placement on surfaces.
• Accessory Protection: RGB hanging decorations help protect stored Switch accessories from accidental contact.

3. Package Contents

Please check the package carefully to ensure all items are present:

• Charging Station Stand x 1
• Wall Mounting Plates x 1
• Pro Controller Holders x 2
• Screws x 4
• Screw Accessories x 4 (e.g., wall anchors)
• User Manual x 1
• Gradienter (Level Tool) x 1
• Type-C Cable x 1

4. Setup Instructions

The PG-SW107 can be set up as a desktop stand or wall-mounted. Choose the method that best suits your gaming space.

4.1 Desktop Stand Setup

Simply place the main charging station unit on a flat, stable surface. Ensure the anti-slip silicone pads are making full contact with the surface for stability. Attach the Pro Controller Holders to the designated slots on the main unit if desired.

4.2 Wall Mount Setup

For a secure wall-mounted installation, follow these steps:

1. Choose Location: Select a suitable wall location, ensuring it is sturdy enough to support the unit and your gaming accessories. Consider proximity to a power outlet.
2. Mark Drilling Points: Use the provided Wall Mounting Plate as a template. Place it against the wall at your desired height and use a pencil to mark the positions for the screws. Use the Gradienter (level tool) to ensure the plate is perfectly horizontal before marking.
3. Drill Holes: Drill pilot holes at the marked positions. The size of the drill bit should match the provided screw accessories (wall anchors).
4. Insert Wall Anchors: Gently tap the screw accessories (wall anchors) into the drilled holes until they are flush with the wall surface.
5. Attach Mounting Plate: Align the Wall Mounting Plate with the inserted wall anchors and secure it using the provided screws. Tighten firmly but do not overtighten.
6. Mount Charging Station: Carefully slide the main charging station unit onto the secured Wall Mounting Plate. Ensure it clicks into place or is firmly seated.
7. Attach Pro Controller Holders: Insert the two Pro Controller Holders into the designated slots on the underside of the main unit. These can also be used for cable management.
8. Connect Power: Connect the provided Type-C cable to the charging station and a suitable power adapter (not included).

5. Operating Instructions

5.1 Powering On and Connecting

Connect the provided Type-C cable to the "IN DC 5V/2A" port on the charging station and plug the other end into a compatible USB power source (e.g., a wall adapter, console dock USB port). The RGB lights will illuminate, indicating the unit is powered.

5.2 Charging Joy-Cons

1. Insert up to four Joy-Cons into the designated charging slots on the top of the unit.
2. The LED indicator above each slot will turn Red to signify that the Joy-Con is charging.
3. Once fully charged, the LED indicator will turn Blue.
4. To stop charging, press the dedicated charging button located on the unit. This allows the unit to function as a stand without actively charging.

5.3 Using USB 2.0 Expansion Ports

The two USB 2.0 ports on the side of the unit are for low-current charging of accessories or data transfer. Connect your USB devices to these ports as needed.

5.4 Adjusting RGB Lighting

The charging station features a customizable RGB light strip:

• Change Color/Mode: Short press the "Light switch" button (refer to Figure 4) to cycle through the 7 monochrome modes and 8 dynamic RGB light modes.
• Memory Function: Long press the "Light switch" button for approximately 3 seconds to memorize the current light setting and turn off the RGB lights. Press again briefly to reactivate the lights with the last memorized setting.

5.5 Organizing Accessories

Utilize the various storage compartments for your gaming gear:

• Nintendo Switch/OLED Console: Place the console in the central slot.
• Joy-Cons: In addition to the charging slots, extra Joy-Cons can be stored in the side compartments.
• Game Cards: Insert up to 10 game cards into the dedicated slots.
• Wrist Straps: Hang wrist straps on the designated hooks.
• Pro Controllers: Place Pro controllers on the two holders at the bottom. Cables can be neatly routed through these holders.

6. Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the unit. Avoid using abrasive cleaners or solvents that could damage the surface.
• Dust Removal: Periodically remove any dust accumulation from the charging ports and ventilation areas to ensure optimal performance.
• Cable Care: Ensure the Type-C power cable is not bent sharply or tangled, which could lead to damage.
• Environmental Conditions: Store and operate the unit in a dry environment, away from direct sunlight, high temperatures, and excessive humidity.

7. Troubleshooting

• No Power/Lights:
  • Ensure the Type-C power cable is securely connected to both the charging station and a working power source.
  • Try a different USB power adapter or USB port.
• Joy-Cons Not Charging:
  • Verify that the Joy-Cons are correctly inserted into the charging slots.
  • Check if the charging button on the unit has been pressed to disable charging. Press it again to enable.
  • Ensure the unit is receiving power (RGB lights are on).
• RGB Lights Not Working/Changing:
  • Ensure the unit is powered on.
  • Short press the "Light switch" button to cycle through modes.
  • If lights were turned off via long press, short press the button to reactivate.
• USB Ports Not Functioning:
  • Ensure the connected device requires low-current charging/data transfer.
  • Check the USB cable connection.

8. Specifications

Note: The "Electric: No" and "With USB: No" properties from the product data appear to be generic classifications and contradict the product's actual functionality as a powered charging station with USB ports. The details above reflect the product's described features.

9. User Tips

• Space Optimization: The wall-mount feature is excellent for decluttering your gaming area. Ensure you utilize the included gradienter for a perfectly level installation.
• Power Source: For optimal charging performance, use a reliable 5V/2A USB power adapter.
• RGB Customization: Experiment with the 15 different RGB light modes to match your gaming setup or mood. Don't forget the memory function to save your favorite setting.
• Product Measurements: For planning your installation space, the approximate packaged dimensions are 26 cm (Length) x 17 cm (Width) x 8 cm (Height). The actual unit dimensions will be slightly smaller.

10. Warranty and Support

For any issues, questions, or warranty claims regarding your IPEGA PG-SW107, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty purposes.