eletechsup SMJAC03

Contents

Schumann Resonance Pulse Sine Wave Generator

Model: SMJAC03 | Brand: Eletechsup

Introduction

The Eletechsup SMJAC03 Schumann Resonance Pulse Sine Wave Generator is designed to create a specific electromagnetic environment that can positively influence human well-being and perception. This device outputs a pure sine wave, with a default frequency of 7.83Hz (the Schumann Resonance frequency), and offers adjustable frequency output from 0.01Hz to 100KHz. It utilizes a low-temperature drift crystal oscillator and a high-precision DAC dedicated chip for stable and accurate signal generation.

While not directly affecting sound or video quality, the Schumann wave is believed to relax the body and mind, enhance perception of sound and images, improve overall health and work efficiency, and alleviate psychological stress. It is suitable for various environments such as audio-visual spaces, bedrooms, offices, creative spaces, and meditation areas.

Product Overview

The generator comes in two main versions: with an acrylic shell and without. Both versions share core functionalities but differ in physical dimensions and weight.

Annotated diagram of the Schumann Resonance Generator showing components like Type-C power interface, LCD display, audio output, signal test interface, SET button, and Backlight button.
Figure 1: Annotated diagram of the Schumann Resonance Pulse Sine Wave Generator, highlighting key components and controls.

Key components include:

  • Ultra-long Schumann wave signal transmitting antenna (double-sided)
  • LCD1602 display screen
  • Type-C 5V Power Interface
  • Output signal indicator light (can be turned off)
  • Signal test interface (GND/SIN port)
  • 3.5MM audio output port
  • Frequency Adjustment Keyboard (0-9, ., OK, SET buttons)
  • Backlight button

Setup Instructions

  1. Power Connection: Connect the device to a DC 5V power source using a Type-C cable. The device supports Type-C to Type-C power supply. No power cable is included as Type-C cables are widely available.

    Note: Ensure the power supply is within the DC 4-15V range.

  2. Initial Power-On: Once connected to power, the LCD1602 display screen should light up, showing the default frequency (7.83Hz).
  3. Placement: Place the generator in the desired environment (e.g., audio-visual space, bedroom, office) to allow the Schumann waves to propagate effectively.

Operating Instructions

Adjusting Output Frequency

  1. Use the '0-9' and '.' buttons on the Frequency Adjustment Keyboard to enter the desired frequency value.
  2. Press the 'OK' button to confirm the entered value.
  3. If an incorrect value is entered, press the 'SET' button to clear the input and re-enter the frequency.

Example: To set the frequency to 9.71Hz, press [9], then [.], then [7], then [1], and finally [OK]. The default power-on output is 7.83Hz. The adjustable range is 0.01Hz to 100KHz. Note that not all frequency points within this range may be precisely settable due to digital resolution.

Saving Parameters After Power Off

By default, parameters are not saved when power is turned off. To save the current frequency setting:

  • Press and hold the 'SET' button until the LCD displays "Data Save ON". This indicates that the current settings will be retained even after the device is powered off.

Controlling LCD Backlight

  • To turn off: Short press the 'BACKLIGHT' button.
  • To turn on: Short press the 'BACKLIGHT' button again.

Controlling Output Signal Indicator (PWR LED)

  • To turn off: Long press the 'BACKLIGHT' button.
  • To turn on: Long press the 'BACKLIGHT' button again.

Using the Audio Output and Signal Test Interface

  • 3.5MM Audio Output Port: This port can be connected to an external signal amplifier if needed.
  • Signal Test Interface (GND/SIN): To verify the output waveform, use an oscilloscope to measure this port. A pure sine wave should be observable.
Schumann Resonance Generator with LCD displaying 'Sin(Hz): 7.83' and a keyboard area below.
Figure 2: Front view of the generator, showing the LCD display and frequency adjustment keyboard.

Maintenance

To ensure the longevity and optimal performance of your Schumann Resonance Pulse Sine Wave Generator, please follow these general maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to gently wipe the device. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the acrylic shell, PCB, or electronic components.
  • Storage: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Handling: Handle the device with care to prevent physical damage. Avoid dropping or subjecting it to strong impacts.
  • Power Supply: Always use a stable DC 5V power supply within the specified 4-15V range. Using an incorrect power supply can damage the device.

Troubleshooting

Problem: LCD does not display correctly after power on.
Solution: Briefly press the 'RES' button and then power on the device again. This will reset the display.
Problem: Device does not power on.
Solution:
  • Check if the Type-C power cable is securely connected to both the device and the power source.
  • Ensure the power source is providing DC 5V and is functioning correctly.
  • Verify that the power supply is within the DC 4-15V operating voltage range.
Problem: Output frequency is not as expected.
Solution:
  • Re-enter the desired frequency using the '0-9' and '.' buttons, then press 'OK'. If an error occurred during input, use the 'SET' button to clear and retry.
  • Ensure that the desired frequency is within the 0.01Hz-100KHz adjustment range.

Specifications

FeatureWith Acrylic Shell VersionNo Acrylic Shell Version
Working VoltageDC 5V (DC 4-15V)DC 5V (DC 4-15V)
Working Current9-14mA8-14mA
Power InterfaceType-C (supports Type-C to Type-C power supply)Type-C (supports Type-C to Type-C power supply)
Default Frequency7.83Hz7.83Hz
Adjustment Range0.01Hz - 100KHz Pure Sine Wave0.01Hz - 100KHz Pure Sine Wave
Signal Voltage Amplitude3V3V
Audio Output3.5MM audio outputN/A (PCB board only)
ShellAcrylic ShellNo Shell (PCB Board)
Size155 x 105 x 26mm (with shell)150 x 100 x 12mm (PCB Board)
Weight197g (with shell)86g

Warranty and Support

This product is provided by Eletechsup, a reputable electronic manufacturer with 11 years of experience. We are committed to providing quality products and customer satisfaction.

  • Free Returns: Enjoy free returns within 90 days of purchase.
  • Fast Delivery Guarantee: We offer fast delivery with guarantees including a $1.00 coupon code if delivery is delayed, a refund if the package is lost, a refund if items are damaged, and a refund if no delivery occurs within 30 days.
  • Security & Privacy: Your personal details are protected and not shared with third parties without your consent.

For further assistance or inquiries, please contact the seller directly through the AliExpress platform.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.