1. Introduction and Overview
The COMFAST CF-WA933 is a high-power AX3000 Outdoor WiFi 6 Access Point designed to provide robust and extensive wireless coverage in challenging outdoor environments. Featuring dual-band capabilities (2.4GHz and 5.8GHz) and WiFi 6 (802.11ax) standard, it offers high-speed transmission and supports a large number of concurrent users. Its weatherproof design ensures reliable operation in various harsh conditions.
Key Features:
- WiFi 6 Standard: High speed and stable wireless connectivity.
- AX3000 Dual-Band: Simultaneous 2.4GHz (574Mbps) and 5.8GHz (2400Mbps) operation.
- High Machine Capacity: Supports over 200 concurrent users.
- 360° Omnidirectional Coverage: Built-in 4dBi antennas provide wide signal spread, covering a radius of 120m+.
- POE/DC Dual Power Supply: Flexible power options with 48V standard POE and 12V DC.
- Full Gigabit Ports: Three Gigabit Ethernet ports (1 WAN, 2 LAN) for high-speed wired connections.
- Precision Waterproof Design: IP66 rated protective shell for resistance against water, dust, and extreme temperatures.
- VLAN Function: Supports flexible networking and improved LAN security.
- Seamless Roaming: Ensures uninterrupted connectivity across multiple APs with the same SSID.
2. Setup Instructions
2.1 Packing List
Before installation, please verify that all items are present in the package. The actual contents may vary slightly due to packaging updates.
- 1x COMFAST CF-WA933 Access Point
- 1x Network Cable
- 1x POE Power Supply (if included in your package)
- 1x Installation Guide
- 1x Mounting Bracket
- Stainless Ties
- Expansion Bolts
- Screws
- Waterproof four-piece set
2.2 Power Supply Options
The CF-WA933 supports two power supply modes:
- Standard POE (Power over Ethernet): This method allows both power and data to be transmitted over a single Ethernet cable, simplifying installation, especially for outdoor deployments. The device supports 802.3af/at POE.
- DC 12V Power Supply: An alternative power option using a 12V DC power adapter.
2.3 Physical Installation
The CF-WA933 can be installed using either pole mounting or wall mounting methods. Choose the method most suitable for your environment.
- Mounting Bracket Installation:
- For Pole Installation: Use the provided stainless ties to securely fix the mounting bracket to the pole.
- For Wall Mounting: Mark the desired drilling points on the wall using the bracket as a template. Drill holes, insert expansion bolts, and then use self-tapping screws to firmly attach the mounting bracket to the wall.
- Attaching the Access Point: Put the main body of the access point into the positioning slot of the mounted bracket. Align the screw holes and tighten the screws to secure the device.
2.4 Network Connections
The CF-WA933 features three Gigabit Ethernet ports:
- 1x WAN RJ45 Ethernet Port: Connect this port to your internet source or network gateway. This port also supports POE power input.
- 2x LAN RJ45 Ethernet Ports: These ports can be used to connect other network devices such as IP cameras, switches, or other access points, enabling flexible network deployment and monitoring.
3. Operating Instructions
3.1 LED Indicators
The CF-WA933 is equipped with 5 signal indicators on its underside to provide an intuitive display of its connection status:
- Power: Indicates the power status of the device.
- WAN: Indicates the status of the WAN port connection.
- LAN (x2): Indicates the status of the two LAN port connections.
- WiFi: Indicates the wireless network activity.
3.2 Remote Management
For large-scale deployments, the COMFAST CF-WA933 can be centrally controlled and managed using COMFAST brand AC management equipment. This allows for one-click deployment and reduces the complexity and costs associated with managing multiple wireless access points.
3.3 VLAN Functionality
The CF-WA933 supports VLAN (Virtual Local Area Network) functionality, which allows for flexible networking and improved security and stability of your LAN. This feature enables the creation of virtual workgroups, making network management more convenient and efficient.
4. Maintenance
4.1 Weatherproof Design
The CF-WA933 features an IP66-rated protective shell, providing high resistance against dust, water ingress, and various harsh outdoor conditions. This precision waterproofing ensures stable operation even in rain, snow, or high humidity.
4.2 General Care
- Cleaning: Periodically inspect the device for any accumulation of dirt or debris. Gently clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Environmental Conditions: While weatherproof, ensure the device is installed in a location that minimizes direct exposure to extreme physical impacts or prolonged submersion.
- Cable Integrity: Regularly check all connected cables (Ethernet, power) for any signs of wear, damage, or loose connections. Ensure waterproof seals are intact.
5. Troubleshooting
This section addresses common issues you might encounter with your COMFAST CF-WA933 Access Point.
Common Problems and Solutions:
- No Power / Device Not Turning On:
- Check the power source. If using POE, ensure the POE injector/switch is powered on and functioning correctly.
- If using DC 12V, verify the power adapter is properly connected and supplying power.
- Inspect the power cable for any damage.
- No Internet Connection / Slow Speeds:
- Verify that the WAN port is correctly connected to your internet source (router/gateway).
- Check the status of the WAN and LAN LED indicators. If they are off or blinking abnormally, there might be a connection issue.
- Ensure your internet service is active and working with other devices.
- Restart the access point and your main router/gateway.
- If speeds are slow, consider potential interference (see 'Lower Interference' in specifications) or network congestion.
- Limited WiFi Coverage / Weak Signal:
- Ensure the access point is mounted in an optimal location, free from major obstructions.
- While the device offers 360° coverage, dense obstacles can still impact signal strength.
- Check the WiFi LED indicator for activity.
- Unable to Connect Multiple Devices (200+ Users):
- While the device supports 200+ users, ensure your backend network infrastructure (router, internet bandwidth) can handle the load.
- Verify that the device firmware is up to date.
- Device Unresponsive / Needs Reset:
- Locate the Reset Button (refer to Figure 6).
- With the device powered on, use a paperclip or similar pointed object to press and hold the reset button for approximately 5-10 seconds until the LEDs flash, then release. This will restore the device to factory default settings.
6. Specifications
| Feature | Description |
|---|---|
| Brand Name | comfast |
| Model Number | CF-WA933 |
| Wireless Protocol | 802.11a/b/g/n/ac/ax (WiFi 6) |
| Antenna | Built-in 4dBi Omnidirectional Antennas |
| Output Power (Max) | 26dBm (400mW) |
| Receiving Sensitivity (Min) | -96dBm |
| 5GHz Frequency | 5.18Ghz-5.825Ghz |
| 2.4GHz Frequency | 2.412GHz-2.4835GHz |
| 2.4GHz Wireless Rate | 574Mbps |
| 5.8GHz Wireless Rate | 2400Mbps |
| WAN RJ45 Ethernet Port | 1x 10/100/1000Mbps (Supports POE) |
| LAN RJ45 Ethernet Port | 2x 10/100/1000Mbps |
| Power Supply | 802.3af/at POE (0-100m), 48V POE, 12V DC |
| Power Consumption (Max) | ≤18W |
| IP Index | IP66 Level |
| MTBF | >250000H |
| Installation Way | Pole-mounted, Wall-mounted |
| Case Material | Plastic Case (Imported ABS Material) |
| Physical Dimensions | 390mm (Length) * 150mm (Diameter) * 150mm (Height) |
| Indicator Lights | Power*1, WAN*1, WiFi*1, LAN*2 |
| Working Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Working Humidity | 10%-90%RH Non-condensing |
| Storage Humidity | 5%-90%RH Non-condensing |
6.1 WiFi 6 Advantages
7. User Tips
No specific user tips were available from customer reviews or Q&A for this product. However, general best practices for outdoor access points include:
- Optimal Placement: Mount the AP as high as possible and with a clear line of sight to the areas you want to cover for best signal propagation.
- Network Planning: For large areas or high-density environments, consider a professional network survey to determine the ideal number and placement of APs for seamless roaming and optimal performance.
- Firmware Updates: Regularly check the manufacturer's website for firmware updates to ensure optimal performance, security, and access to new features.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the COMFAST Official Store or your authorized reseller. Keep your purchase receipt as proof of purchase for any warranty claims.
