TKLBLS Z4

Contents

TKL Z-4 4-Channel Professional Audio Mixer User Manual

Model: Z4

Brand: TKLBLS

1. Introduction

Thank you for choosing the TKL Z-4 4-Channel Professional Audio Mixer. This compact and versatile mixer is designed for a wide range of audio applications, including K-song recording, live broadcasting, bar nights, performances, and conferences. It features 99 built-in DSP effects, Bluetooth 5.0 connectivity, USB audio interface for PC recording, and 48V phantom power for condenser microphones. This manual will guide you through the setup, operation, and maintenance of your new audio mixer.

TKL Z-4 Mixer Front View

Figure 1: TKL Z-4 Professional Audio Mixer

2. Safety Instructions

Please read and follow these safety instructions carefully to prevent damage to the unit and ensure safe operation.

  • CAUTION: To reduce the risk of electrical shock, do not remove the cover (or back). No user-serviceable parts inside; refer servicing to qualified personnel.
  • WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture.
  • This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure, voltage that may be sufficient to constitute a risk of shock.
  • This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read the manual.
Safety Warning Symbols

Figure 2: Safety Warning Symbols

3. Product Features

The TKL Z-4 mixer offers a comprehensive set of features for professional audio mixing:

  • 4-Channel Input: Two mono input channels (MIC/LINE) and one stereo channel (3/4).
  • Ultra-Low Noise Preamps: Discrete mic preamps with +48V phantom power for condenser microphones.
  • High Headroom: Offers a wide dynamic range for clear audio.
  • 3-Band EQ: Ultra-musical 3-band equalization (High, Mid, Low) on all channels for precise tone shaping.
  • 99 DSP Effects: Built-in digital multi-effects processor with 99 presets including Reverb, Delay, Chorus, Flanger, and more.
  • Bluetooth 5.0: Wireless connectivity for streaming audio from smartphones or other Bluetooth-enabled devices.
  • USB Audio Interface: Connects to PC for high-quality recording, editing, and processing of audio.
  • Flash Drive Playback: Supports MP3/U disk / SD card playback.
  • OTG Stereo Live Broadcast: Digital signal lossless output for live streaming with lower background noise.
  • Main Meters: LED level display for monitoring output.
Key Features Icons

Figure 3: Key Features Overview

4. Controls and Functions

Familiarize yourself with the controls of your TKL Z-4 mixer. Refer to the diagram below for component identification.

Product Parameter Diagram

Figure 4: TKL Z-4 Control Layout

4.1. Input Channel Section (Channels 1-4)

  • MIC/LINE Inputs (1, 2): Electronically balanced inputs accepting standard XLR male connectors for microphones and 1/4" TRS/TS for line-level instruments.
  • PAD (-26dB): Attenuates the input signal by -26dB. Use if you hear distortion or the [PEAK] LED lights. Note: Turn the [LEVEL] knob to '0' (minimum) before toggling the [PAD] switch to avoid noise.
  • HPF/80HZ (High-Pass Filter): Applies a high-pass filter that attenuates frequencies below 80Hz. Useful for reducing unwanted vibration and wind noise from microphones.
  • GAIN Control: Determines the basic volume for each channel. Adjust so that the corresponding [PEAK] LEDs flash briefly at the loudest points. Adjusts input sensitivity from -6dB to +38dB, or +20dB to +64dB when PAD is active.
  • HI EQ: Provides up to 15 dB of boost or cut at 10KHz and above. Use for adding sizzle to cymbals or transparency to keyboards/vocals.
  • MID EQ: Provides 15 dB of boost or cut, centered at 2.5KHz. This knob is highly dynamic for shaping sound.
  • LOW EQ: Provides up to 15 dB of boost or cut at 80Hz and below. Affects bass drums, bass guitar, and synth patches.
  • AUX Control: Sets the level of signal sent from the external source.
  • FX/SEND Control: Adjusts the level of signal sent to the internal digital effects processor.
  • PAN Control: Continuously varies the amount of post-fader signal sent to the left or right busses.
  • PEAK LED: Lights when the input or post-equalizer sound is too high. If lit, turn the [GAIN] knob to the left to lower the volume.

4.2. Master Section

  • FX SEND / PHONES / STEREO OUT (L/R): Output jacks for effects send, headphones, and main stereo output.
  • USB TO PC / Bluetooth Display: Digital display for USB/Bluetooth player status.
  • PREV/V-, NEXT/V+, P/P, MODE/O Buttons: Controls for the USB/Bluetooth player (previous track/volume down, next track/volume up, play/pause, mode selection).
  • 99 DSP PROGRAM Display: Shows the currently selected DSP effect program number.
  • PROGRAM Knob: Selects one of the 99 internal effects.
  • PARAMETER Knob: Adjusts the parameter (depth, speed, etc.) for the selected effect.
  • MAIN METERS: LED level indicators for monitoring the left and right main output levels.
  • PHANTOM +48V Switch/LED: Supplies +48V DC phantom power to XLR microphone inputs. The LED indicates when it's active. Caution: Turn off when not using condenser microphones to prevent noise and potential damage.
  • PHONES Knob: Controls the volume level for the headphone output.
  • LEVEL Faders (EFFECTS, MP3, STEREO): Faders for adjusting the volume of the effects return, MP3/Bluetooth player, and the main stereo output.

5. Connections and Setup

Proper connections are essential for optimal performance. Use high-quality cables for all audio connections.

5.1. Audio Connections

The mixer supports various connection types:

  • Microphones: Connect dynamic or condenser microphones to the MIC/LINE inputs (XLR). Ensure +48V phantom power is enabled for condenser microphones.
  • Line-Level Devices: Connect instruments, CD players, synthesizers, or other line-level devices to the MIC/LINE inputs (1/4" TRS/TS) or the stereo 3/4 input (RCA).
  • Headphones: Connect headphones to the PHONES jack (1/4" stereo).
  • Main Output: Connect powered speakers or a power amplifier to the STEREO OUT (L/R) jacks (XLR or 1/4" TRS).
  • FX Send: Use the FX SEND jack to send audio to external effects processors.
  • Aux Send: Use the AUX SEND jack to send audio to external devices.
Mixer Connection Diagram

Figure 5: Typical Mixer Connection Diagram

5.2. Power Connection

  • Power Jack: Connect the supplied AC power adapter to the POWER JACK on the rear of the unit.
  • Power Switch: Before turning on the power, ensure all [GAIN], [LEVEL], and [STEREO LEVEL] knobs are turned fully to the left (minimum).
Power Switch Detail

Figure 6: Power Switch Detail

6. Operation

6.1. Initial Power-Up

  1. Ensure all level controls (GAIN, LEVEL, STEREO LEVEL) are set to their minimum positions.
  2. Connect the power adapter to the mixer and a suitable power outlet.
  3. Flip the POWER switch to the 'ON' position. The POWER LED will illuminate.

6.2. Using DSP Effects

The TKL Z-4 features 99 built-in digital effects to enhance your audio.

  • Selecting Effects: Use the PROGRAM knob to cycle through the 99 available effects. The selected program number will be shown on the 99 DSP PROGRAM display.
  • Adjusting Parameters: Use the PARAMETER knob to adjust specific characteristics (e.g., depth, speed) of the selected effect.
  • Effect Level: Use the EFFECTS LEVEL fader to control the overall volume of the applied effect.

DSP Effect Categories:

  • 00-09: HALL
  • 10-19: ROOM
  • 20-29: DELAY
  • 30-39: PING PONG
  • 40-49: ECHO
  • 50-59: ECHO REVERB
  • 60-69: KARAOKE
  • 70-79: PITCH
  • 80-84: CHORUS
  • 85-89: TREMOLO
  • 90-94: FLANGE
  • 95-99: AUTO TUNE
48V Phantom Switch and 99 DSP Effects List

Figure 7: DSP Effects List

6.3. USB Player Operation

The integrated USB player allows for playback of audio files from a USB flash drive.

  1. Insert USB: Insert your USB flash drive into the USB port on the mixer.
  2. Navigation: Use the PREV/V- and NEXT/V+ buttons to select tracks. Hold these buttons for approximately 3 seconds to decrease or increase volume, respectively.
  3. Play/Pause: Press the P/P button to play or pause the audio.
  4. Mode: Use the MODE/O button to switch between different playback modes (e.g., Bluetooth, REC, REP song loop).
Flash Drive Playback

Figure 8: USB Flash Drive Playback

6.4. Bluetooth Connection

Connect your smartphone or other Bluetooth-enabled device wirelessly to the mixer.

  1. Activate Bluetooth: Ensure the mixer's mode is set to Bluetooth (check the display).
  2. Pairing: On your device, search for available Bluetooth devices and select 'TKL Z-4' (or similar name) to pair.
  3. Playback: Once paired, you can stream audio from your device to the mixer.
Bluetooth 5.0 Connection

Figure 9: Bluetooth 5.0 Connectivity

6.5. PC Recording

The TKL Z-4 can be connected to a computer via USB for recording and audio processing.

  • Connect USB: Use a USB cable to connect the mixer's 'USB TO PC' port to your computer.
  • Software Setup: Your computer should recognize the mixer as an audio device. Select it as the input device in your preferred Digital Audio Workstation (DAW) or recording software.
  • Recording: You can now record, edit, and process audio from the mixer on your computer.
High-Quality Recording Setup

Figure 10: PC Recording Setup

6.6. OTG Stereo Live Broadcast

For high-quality live broadcasting directly from your phone, use the OTG connection.

  • Connect OTG: Connect your smartphone to the mixer using an OTG cable.
  • Live Streaming: This provides a digital signal lossless output, resulting in lower background noise and richer sound texture for your live broadcasts.
OTG Stereo Live Broadcast

Figure 11: OTG Stereo Live Broadcast Setup

Video 1: TKL Z-4 Mixer Demonstration (showing controls and effects)

7. Specifications

Detailed technical specifications for the TKL Z-4 mixer:

CategoryParameterValue
Mono InputsMic inputElectronically balanced, discrete input configuration
Bandwidth10 Hz to 60kHz ±3dB
Distortion (THD&N)0.01% at 4 dBu, 1kHz, Bandwidth 80 kHz
Mic E.I.N (22 Hz-22 kHz)-129.5dBu, 150 Ohm source
-117.3 dBqp, 150 Ohm source
-132.0 dBqp, input shorted
-122.0 dBqp, input shorted
Line InputTRIM range0dB to +10dB
Line InputElectronically balanced
Bandwidth10 Hz to 60kHz ±3dB
Line level range+10dBu to -40dBu
EqualizationHi Shelving10kHz +/-15dB
Mid Range2.5kHz+/-15dB
Lo Shelving100Hz+/-15dB
Master Mix SectionMax Output+22 dBu balanced
Control Room Out+22 dBu unbalanced
Signal-To-Noise Ratio112dB, all channels at Unity Gain
Power SupplyUSA/Canada~120V AC, 60 Hz
U.K./Australia~240V AC, 50 Hz
China~220V AC, 50 Hz
Dimensions (L x W x H)19cm x 16.3cm x 4.5cm
Net Weight0.6 kg
Voltage RangeUSB (5-20V DC)
Inbox AdaptorYes
Power SourceDC
Built-in BatteryNo
Plug TypeUS Plug
CertificationCE
Dimensions and Specifications Table

Figure 12: Mixer Dimensions and Specifications

8. Troubleshooting

If you encounter any issues with your TKL Z-4 mixer, please refer to the following common troubleshooting steps:

  • No Sound Output:
    • Check all cable connections to ensure they are secure.
    • Verify that the main STEREO LEVEL fader and individual channel LEVEL knobs are turned up.
    • Ensure your speakers or headphones are properly connected and powered on.
    • Check the MAIN METERS for signal activity.
  • Distortion:
    • Reduce the GAIN control for the input channel.
    • If the PEAK LED is lit, reduce the input signal level.
    • Ensure the PAD switch is engaged for very hot input signals.
  • Hum or Noise:
    • Check all cable connections for proper shielding and grounding.
    • Ensure all power cables are securely connected.
    • If using a condenser microphone, ensure the +48V PHANTOM power is correctly engaged and the microphone is compatible.
  • USB Player Not Working:
    • Ensure the USB flash drive is properly inserted and contains compatible audio files (WAV/WMA/MP3).
    • Try re-inserting the USB drive or using a different one.
  • Bluetooth Connection Issues:
    • Ensure the mixer is in Bluetooth mode.
    • Check that Bluetooth is enabled on your device and it's within range.
    • Try unpairing and re-pairing the device.

If the problem persists after trying these steps, please contact customer support.

9. User Tips

  • Gain Staging: Always set your input GAIN levels carefully. Aim for the PEAK LED to flash only occasionally on the loudest parts of your signal to avoid distortion.
  • Phantom Power: Only activate the +48V PHANTOM switch when using condenser microphones. Ensure it's off for dynamic microphones or other devices that don't require it.
  • Cable Management: Keep your cables organized to prevent tangles and potential signal interference.
  • Experiment with DSP: Don't be afraid to experiment with the 99 DSP effects to find the perfect sound for your application. Adjust the PARAMETER knob to fine-tune the effects.

10. Maintenance and Support

10.1. Maintenance

To ensure the longevity and optimal performance of your mixer:

  • Keep the unit clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the mixer to extreme temperatures, humidity, or direct sunlight.
  • Do not use harsh chemicals or abrasive cleaners.
  • Store the mixer in a safe place when not in use to prevent physical damage.

10.2. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. A detailed user manual in PDF format is also available for download: TKL Z-4 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.