1. Introduction
The TKL Z-4 Professional Mixer is a compact and versatile 4-channel audio mixing console designed for various applications including K-song recording, live broadcasting, bar nights, performances, and conferences. It features 99 DSP effects, Bluetooth 5.0 connectivity, USB audio interface for PC recording, and 48V phantom power for condenser microphones. This manual provides detailed instructions for setting up, operating, and maintaining your TKL Z-4 mixer.

2. Safety Information
- Ensure the mixer is connected to the correct power supply using the provided adapter.
- Do not expose the unit to rain or moisture to prevent fire or electric shock.
- Do not open the casing. Refer all servicing to qualified personnel.
- Avoid placing the unit near heat sources or in direct sunlight.
- Keep the unit away from strong electromagnetic fields.
3. Product Overview and Controls
The TKL Z-4 mixer features a comprehensive set of controls for each channel and master output. Familiarize yourself with the layout before operation.

Control Descriptions:
- Microphone Input (MIC/LINE 1-2): XLR/TRS combo jacks for microphones or line-level instruments.
- PAD Button: Attenuates input signal by 26dB for high-output sources.
- HPF (High-Pass Filter) Button: Attenuates frequencies below 80Hz to reduce unwanted low-end noise.
- GAIN Knob: Adjusts the input sensitivity for each channel.
- Treble/Tenor/Bass Knobs (EQ): 3-band equalizer for adjusting high, mid, and low frequencies.
- FX SEND Knob: Controls the amount of signal sent to the internal DSP effects processor.
- LEVEL Knob: Adjusts the output level of each channel.
- 99 DSP Effects Display: Digital display for selecting and showing the current effect number.
- PROGRAM Knob: Selects one of the 99 built-in DSP effects.
- PARAMETER Knob: Adjusts parameters of the selected DSP effect.
- MAIN METERS: LED indicators for main stereo output level.
- PHANTOM Power Switch: Activates 48V phantom power for condenser microphones.
- USB Interface: For connecting to a computer for recording/playback or for USB flash drive playback.
- Bluetooth: Wireless audio streaming input.
- STEREO OUT (L/R): Main stereo output jacks (XLR).
- PHONES: Headphone output jack.
- POWER SWITCH: Turns the unit on/off.
- POWER INTERFACE: DC input for the power adapter.
4. Setup Instructions
4.1 Power Connection
- Ensure the mixer's power switch is in the "OFF" position.
- Connect the provided DC power adapter to the POWER INTERFACE on the rear of the mixer.
- Plug the power adapter into a suitable electrical outlet (e.g., US Plug for 120V AC, 60Hz).
- Turn the mixer's power switch to "ON".
4.2 Connecting Audio Devices
The TKL Z-4 mixer supports a variety of audio input and output devices. Refer to the connection diagram below for common setups.

- Microphones: Connect wired microphones (dynamic or condenser) to the MIC/LINE inputs (1 or 2) using XLR cables. For condenser microphones, activate the 48V PHANTOM power switch.
- Line-Level Instruments: Connect instruments like guitars (with appropriate pre-amp/DI box if needed) or keyboards to the MIC/LINE inputs using 1/4" TRS/TS cables.
- External Effects/Processors: Use the FX SEND output to connect to external effects units, and return the processed signal to an available line input if desired.
- Headphones: Connect headphones to the PHONES jack for monitoring.
- Main Output: Connect the STEREO OUT (L/R) XLR jacks to a power amplifier, active speakers, or a recording device.
- USB Connection (PC): Connect the mixer to a computer via the USB interface for recording or playback.
- USB Flash Drive: Insert a USB flash drive containing MP3 files into the USB interface for MP3 playback.
- Bluetooth Devices: Pair your smartphone or other Bluetooth-enabled device for wireless audio streaming.
- OTG Connection (Mobile Phone): Connect your mobile phone via an OTG cable to the USB interface for digital stereo live broadcasting.
5. Operating Instructions
5.1 Basic Mixing
- Power On: After connecting all devices, turn on the mixer.
- Set Levels:
- Start with all GAIN, LEVEL, and MASTER faders/knobs at their minimum positions.
- For each active input channel, gradually increase the GAIN knob until the PEAK LED flashes only occasionally during the loudest parts of the signal. If the PEAK LED is constantly lit, reduce the GAIN.
- Adjust the Treble, Tenor, and Bass (EQ) knobs to shape the tone of each input.
- Gradually increase the channel LEVEL knob to send the signal to the main mix.
- Adjust the main STEREO LEVEL fader to achieve the desired overall output volume, monitoring the MAIN METERS to avoid clipping.
- Headphone Monitoring: Adjust the PHONES level knob to set your desired monitoring volume.
5.2 Using DSP Effects
The TKL Z-4 features 99 built-in DSP effects to enhance your sound.

- Select Effect: Turn the PROGRAM knob to scroll through the 99 effects displayed on the 99 DSP Effects Display. Press the PROGRAM knob to confirm your selection.
- Apply Effect: Use the FX SEND knob on each channel to control how much of that channel's signal is sent to the effects processor.
- Adjust Effect Parameters: Use the PARAMETER knob to fine-tune the selected effect (e.g., delay time, reverb decay).
5.3 Phantom Power (48V)
The mixer provides 48V phantom power for condenser microphones.

- Only activate the 48V PHANTOM power switch when using condenser microphones that require it.
- Ensure all channel levels are down before activating or deactivating phantom power to prevent loud pops that could damage speakers or headphones.
5.4 Bluetooth Wireless Streaming
Connect your mobile device wirelessly to the mixer for audio playback.

- Ensure Bluetooth is enabled on your mobile device.
- On the mixer, select the Bluetooth input mode (usually indicated by "BLUE" on the display).
- Search for "TKL Z-4" or a similar device name on your mobile device's Bluetooth settings.
- Pair and connect. Audio from your device will now stream through the mixer.
5.5 USB Playback and PC Recording
The USB interface allows for both MP3 playback from a flash drive and audio recording/playback with a computer.


- USB Flash Drive Playback: Insert a USB flash drive containing MP3 files into the USB port. The mixer will automatically detect and play the audio. Use the PREV/NEXT/P/P/MODE buttons to control playback.
- PC Recording/Playback: Connect the mixer to your computer using a USB cable. The mixer will function as an audio interface. Select the mixer as your input/output device in your computer's sound settings or DAW (Digital Audio Workstation) software. This allows for high-quality recording, editing, and processing of audio.
5.6 OTG Stereo Live Broadcast
For direct digital audio streaming to mobile devices for live broadcasts.

- Connect your mobile phone to the mixer's USB interface using an OTG (On-The-Go) cable.
- This provides a digital signal lossless output, resulting in lower background noise and richer sound texture for your live streams.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the mixer in a cool, dry place away from direct sunlight and excessive dust.
- Cable Management: Ensure cables are not kinked or strained to prevent damage to connectors and internal wiring.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output |
|
|
| Distorted or noisy sound |
|
|
| Cannot use channel 3/4 (USB/Bluetooth/MP3) |
|
|
| Phantom power not working |
|
|
8. Specifications

| Feature | Detail |
|---|---|
| Model Number | Z4 |
| Type | Mixers |
| Channels | 4 |
| DSP Effects | 99 (Reverb, Delay, Flanger, etc.) |
| Bluetooth | Yes, Wireless Bluetooth 5.0 |
| USB Interface | Yes (PC recording/playback, USB flash drive playback, OTG for mobile) |
| Phantom Power | 48V |
| Built-in Battery | No |
| Power Source | DC (via inbox adaptor) |
| Inbox Adaptor | Yes (US Plug) |
| Certification | CE |
| Dimensions (L x W x H) | 19cm x 16.3cm x 4.5cm (approx.) |
| Net Weight | 0.6 kg (approx.) |
| TRIM Range | 0dB to +10dB |
| Line Input | Electronically balanced |
| Bandwidth | 10 Hz to 60kHz ±3dB |
| Distortion (THD & N) | 0.01% at 4 dBu, 1kHz, Bandwidth 80 kHz |
| Line Level Range | +10dBu to -40dBu |
| Equalization (Hi/Mid/Lo) | Hi: 10kHz +/-15dB, Mid: 2.5kHz+/-15dB, Lo: 80Hz+/-15dB |
| Master Mix Max Output | +22 dBu balanced |
| Control Room Out | +22 dBu unbalanced |
| Signal-To-Noise Ratio | 112dB, all channels at Unity Gain |
| Mains Voltages (Adapter Input) | USA/Canada: ~120V AC, 60 Hz; U.K./Australia: ~240V AC, 50 Hz; China: ~220V AC, 50 Hz |
9. User Tips
- Channel 3/4 Usage: If you experience issues with channels 3/4, ensure you have selected the correct input mode (USB/Bluetooth/MP3) using the MODE button. These channels are shared for digital inputs.
- Power Supply: Always use the provided power adapter. Do not attempt to connect the mixer directly to a car battery or other non-standard power sources, as this can damage the unit and void your warranty. The mixer requires a specific DC input voltage and current.
- Gain Staging: Proper gain staging is crucial for clear audio. Set individual channel GAIN knobs so that the PEAK LED only flashes occasionally. Then, use the channel LEVEL and master STEREO LEVEL fader to control overall volume.
- Phantom Power Safety: Always connect condenser microphones before activating 48V phantom power, and disconnect them after deactivating it, to prevent potential damage to the microphone or mixer.
10. Frequently Asked Questions (FAQ)
- Q: How many channels does this mixer have?
- A: The TKL Z-4 is a 4-channel mixer.
- Q: How many effects does it come with?
- A: It features 99 built-in DSP effects.
- Q: Can I connect it directly to a 12V car battery?
- A: No, you should only use the provided power adapter to connect the mixer to a standard electrical outlet. Connecting it directly to a car battery without proper voltage regulation can damage the device.
- Q: Can I record audio to my computer with this mixer?
- A: Yes, you can connect the mixer to your PC via the USB interface to record and process audio.
11. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.