HanRongDa HRD 747

Contents

HanRongDa HRD 747 Portable Radio User Manual

Model: HRD-747 | Brand: HanRongDa

1. Introduction

Thank you for purchasing the HanRongDa HRD 747 Portable Radio. This manual provides essential information for the safe and effective use of your device. Please read these instructions carefully before operation and retain them for future reference.

For detailed technical specifications, additional manuals, or software for this specific model, please contact our support team via AliExpress internal message or email at alisupport2026@163.com. We aim to respond within 24 working hours.

2. Safety Warnings

2.1 Electrical Safety

  • Use only the power adapter provided with the product or a compliant power supply.
  • Do not use the device in humid environments unless it specifically states a waterproof rating.
  • If the power cord is damaged, discontinue use immediately and contact support for a replacement.
  • Always disconnect the power before cleaning the device.

2.2 Usage Environment

  • The operating temperature range for this device is -10°C to 40°C.
  • Avoid direct sunlight, high temperatures, and dusty environments.
  • Ensure good ventilation and do not block the heat dissipation holes.

2.3 Operational Safety

  • Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
  • Prevent liquid from entering the product interior.
  • If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact after-sales service.

3. Product Overview

The HanRongDa HRD 747 is a portable full-band radio receiver designed for wide frequency scanning. Below are diagrams illustrating its components and controls.

Diagram showing the front and side controls and ports of the HRD-747 radio.
Figure 1: Front and Side View with Controls and Ports

Key Components and Controls:

  • Antenna: Extendable telescopic antenna for reception.
  • External 3.5mm antenna jack: For connecting an external antenna.
  • Lanyard hole: For attaching a wrist strap or lanyard.
  • External 3.5mm headphone jack: For private listening.
  • LCD display: Shows frequency, mode, time, battery status, and other information.
  • Power button: Turns the radio on/off.
  • BAND button: Selects different frequency bands (FM, MW, SW, AIR, CB, VHF, UHF, WX, HAM).
  • MODE button: Selects modulation modes (LSB, USB, AM, NFM, WFM, FM-Stereo).
  • MEMO button: Used to save channels.
  • STEP button: Sets tuning step size.
  • DEL button: Deletes saved channels.
  • TUNE buttons (Up/Down): Adjusts frequency.
  • VOL- / VOL+ buttons: Adjusts volume.
  • SET button: Enters menu/clock settings, sets alarm.
  • LOCK button: Locks buttons to prevent accidental changes.
  • AL/ON button: Turns on the alarm.
  • Speaker: Built-in speaker for audio output.
  • Pulley select channel: Side-mounted wheel for channel selection.
  • Type-C recharge jack: For charging the device.
  • Battery cover: Access to the battery compartment.
  • Back buckle: Clip for attaching the radio to clothing or a bag.

4. Setup

4.1 Unpacking Inspection

After opening the package, please check that all items are complete and undamaged. If you find any items missing or damaged, please contact our support team immediately.

4.2 Battery Installation and Initial Charge

The HRD 747 uses a BL-5C rechargeable battery. Before first use, ensure the battery is properly installed and fully charged.

  1. Open the battery cover on the back of the radio.
  2. Insert the BL-5C battery into the compartment, ensuring the contacts align correctly. If the battery comes with a protective film, remove it before installation.
  3. Close the battery cover.
  4. Connect the radio to a power source using the provided Type-C USB cable and a compatible power adapter (AC100-240V, 50/60Hz or DC5V/9V/12V).
  5. Allow the radio to charge completely before its first use. The display will indicate charging status.
Image showing the battery compartment open with a BL-5C battery next to it.
Figure 2: Battery Installation
Side view of the HRD-747 radio highlighting the Type-C charging port and tuning wheel.
Figure 3: Type-C Charging Port

5. Operation

5.1 Basic Operations

  • Power On/Off: Press and hold the POWER button for approximately 3 seconds to turn the radio on or off.
  • Function Selection: Short press the MODE button to cycle through different functions or modulation types.
  • Display Screen: The LCD display shows the current frequency, selected mode, time, battery level, and other relevant status indicators.

5.2 Tuning and Band Selection

  1. Band Selection: Press the BAND button to switch between available frequency bands (e.g., FM, MW, SW, AIR, CB, VHF, UHF, WX, HAM).
  2. Frequency Tuning: Use the TUNE up/down buttons or the side-mounted Pulley select channel wheel to adjust the frequency within the selected band.
  3. Tuning Step: Press the STEP button to change the tuning step size for finer or faster frequency adjustments.

5.3 Volume Control

Use the VOL- and VOL+ buttons to decrease or increase the audio volume.

5.4 Memory Functions

  • Save Channel: Tune to your desired frequency, then press the MEMO button to save it to memory. Follow on-screen prompts to select a memory slot.
  • Delete Channel: To delete a saved channel, navigate to the channel and press the DEL button.
  • Auto Scan Memory Station: The radio supports automatic scanning and saving of available stations. Refer to the on-screen menu for this feature.

5.5 Lock Function

Press the LOCK button to disable all other buttons, preventing accidental changes to settings or frequency. Press it again to unlock.

5.6 Alarm and Clock

Use the SET button to access clock settings and alarm functions. Press AL/ON to activate the alarm.

6. Technical Specifications

ParameterSpecification
Project NameAll-Band Portable Radio
ModelHRD-747
Battery CapacityBL5C 1000mAH 3.7V Wh (Rechargeable Battery Pack)
Headphone Output3.5mm stereo
Speaker40MM 8Ω 1W (Built-In Speaker)
External Antenna Jack3.5mm (56CM fully stretched telescopic antenna)
Dimensions111 x 60 x 20mm
Weight212g (packaging weight)
Body MaterialMetal
ScreenYes
BluetoothNo
Input PowerAC100-240V, 50/60Hz or DC5V/9V/12V (Refer to product label)
Operating Temperature-10°C to 40°C
Storage Temperature-20°C to 60°C
Protection LevelIP20 (for indoor use, except for waterproof models)
AuthenticationCE, RoHS (Compliant with EU directives)
FeaturesDisplay temperature, clock, auto power off, orange backlight, auto scan memory station

Frequency Range

BandRange
FM164.0-108MHZ
FM276.0-108MHZ
FM387.5-108MHZ
AM (Morning)520-1710KHZ
SW (Southwest)2.00-30.00MHZ
CB25.00-28.00MHZ
AIR118.00-138.00MHZ
VHF UHF20,000-520MHZ
VHF30.00-223.00MHZ
VHF (Specific)144.00-148.00MHZ
VHF (Specific)156.025-163.275MHZ
UHF430.00-520.00MHZ
WX162,400-162,550MHZ

Acceptance Sensitivity

BandSensitivity
FMUV
AM (Morning)2mv/m
SW (Southwest)30UV
AIR3uv
VHF8dB
UHF8dB
Bandwidth8dB

7. Maintenance and Care

  • Cleaning: Wipe the outer casing with a soft, dry cloth. Do not use chemical solvents.
  • Storage: When not in use for an extended period, clean the device and store it in a cool, dry place.
  • Battery: If the device will not be used for an extended period, remove the battery to prevent leakage.

8. Troubleshooting Common Problems

ProblemPossible ReasonsSolution
Unable to power onPower not connected / Battery depletedCheck the power connection, charge the battery, and try again.
No display / Display errorPoor connection / Incorrect settingsRestart the device and check the connections.
Inaccurate measurement values (instrument-related)Range error / Calibration requiredConfirm the measurement range and contact calibration services if needed.
Other faultsN/AContact customer service for technical support.

9. User Tips

  • First Use: Remember to remove any protective film from the battery and fully charge the radio before its initial use.
  • Learning Curve: The radio offers many features and bands. Take time to familiarize yourself with the controls and tuning methods, as they may require some practice.
  • Memory Function: Utilize the memory function to save your favorite stations for quick and easy access, especially since direct keypad frequency entry is not available.
  • Antenna Care: Handle the telescopic antenna gently when extending and retracting it to ensure its longevity and optimal performance.
  • Enhanced Reception: For improved reception, particularly on weaker signals or specific bands like longwave, consider connecting an external antenna to the designated 3.5mm jack.
  • Explore Features: Don't hesitate to explore the various menus and bands to discover the full capabilities of your HanRongDa HRD 747 radio.

10. Warranty and Technical Support

10.1 Warranty Policy

This product typically comes with a 12 to 24-month warranty from the date of purchase. Please refer to the store's specific announcement for exact warranty terms.

10.2 Technical Support

For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact us via AliExpress internal message or email at alisupport2026@163.com.

11. EU Compliance Information

11.1 CE Declaration of Conformity

This product complies with the essential requirements of the following EU directives:

  • Low Voltage Directive (LVD) 2014/35/EU
  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
  • RoHS Directive 2011/65/EU

11.2 WEEE Directive

The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste. It must be collected and recycled separately.

12. Disclaimer

This instruction manual is a general version. The actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.