1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Techage Wireless Security IP Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality.
Key Features:
- HD 3MP/5MP WiFi Camera System
- Human/Motion Detection with Email Alert and Alarm Siren
- Customizable Camera Alarm Sound/Bell
- Built-in Microphone and Speaker for Two-way Audio
- Three Night Vision Modes: Infrared, Dual Warning Lights, Full Color
- P2P Multi-User Remote Access via Smartphone/Tablet App (iCsee/XMeye)
- H.265 Video Compression for efficient storage and faster streaming
- IP66 Weatherproof Metal Bullet Camera for outdoor and indoor use
- Max support 128GB TF Card Storage (not included)
2. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your vendor.
- 1 x H.265 8CH 5MP WiFi NVR (if selected)
- 2/4/6/8 x 3MP/5MP WiFi IP Cameras (quantity depends on purchase)
- 1 x Power Supply for NVR
- 1 x USB Mouse for NVR
- 1 x Network Cable for NVR
- 1 x User Manual
- 2/4/6/8 x Screw bags
- 2 x Warning Sticker (gift)
- Optional: No HDD / 1TB / 3TB HDD
3. Setup Guide
3.1 Camera Components
3.2 NVR System Connection Diagram
- Connect the NVR to its power adapter.
- Connect the NVR to a monitor via VGA or HD port.
- Connect a USB mouse to the NVR for navigation.
- Connect the NVR to your WiFi router using a network cable for internet access.
- Power on each IP camera using its dedicated power supply.
- Ensure all cameras are within range of the NVR's WiFi signal.
- For remote viewing, ensure your NVR is connected to the internet and configure the mobile application (iCsee/XMeye).
3.3 TF Card Installation (for standalone camera use)
The camera supports up to 128GB TF (Micro SD) card storage for local recording when used independently without an NVR.
- Locate the TF card slot on the camera body. This is typically found by unscrewing a small cover.
- Carefully insert the TF card into the slot until it clicks into place.
- Replace the cover securely to maintain the camera's IP66 weatherproof rating.
4. Operating Instructions
4.1 Mobile App Remote Viewing
The camera system supports P2P remote access via the iCsee/XMeye app on Android and iOS devices.
- Download the "iCsee" or "XMeye" app from the Apple App Store or Google Play.
- Register an account and log in.
- Add your camera/NVR device by scanning the QR code on the device or manually entering its ID.
- Once added, you can view live video, access recorded footage, and configure settings from anywhere.
4.2 Two-Way Audio Communication
The cameras are equipped with a built-in microphone and speaker, enabling real-time two-way audio communication.
- In the mobile app's live view, locate the microphone icon to speak through the camera's speaker.
- The camera's microphone will capture audio from its surroundings.
4.3 Night Vision Modes
The camera offers three night vision modes:
- Infrared Night Vision: Standard black and white night vision using infrared LEDs.
- Dual Warning Lights: When motion is detected at night, the white LED lights illuminate as a deterrent and provide color video.
- Full Color Night Vision: Provides full-color video at night when the white LEDs are continuously lit.
4.4 Smart AI Human Motion Detection
The camera system features intelligent human detection to reduce false alarms.
- Configure the alarm area in the app settings.
- When a human body is detected in the defined alarm area, the camera will trigger an alarm (light, siren, email alert, app push notification).
- The system is designed to ignore non-human activities like animals, cars, or insects to increase alarm accuracy.
4.5 Video Playback
Access recorded footage through the mobile app's smart playback feature.
- Open the app and select the camera/NVR.
- Navigate to the playback section.
- Use the timeline to select the desired recording period. The smart playback feature allows for faster review by skipping unimportant segments.
5. Maintenance
- Cleaning: Regularly clean the camera lens with a soft, dry cloth to ensure clear image quality. Avoid abrasive cleaners.
- Firmware Updates: Check for and install firmware updates periodically through the mobile app or NVR interface to ensure optimal performance and security.
- Power Supply: Ensure the camera and NVR are connected to stable power sources. Avoid frequent power interruptions.
- Cable Management: Secure all cables to prevent damage and ensure a stable connection.
- Storage Management: If using a TF card, periodically check its storage capacity and format it if necessary to maintain recording efficiency. For NVR systems, ensure the HDD has sufficient space.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not connecting to WiFi | Incorrect WiFi password; Camera too far from router; 5GHz WiFi network used. | Verify WiFi password. Move camera closer to router. Ensure you are using a 2.4GHz WiFi network (5GHz is not supported). |
| No image/video | Power issue; Network connection issue; Lens obstructed. | Check power supply. Verify network connection. Clean the camera lens. |
| Poor image quality | Dirty lens; Insufficient lighting; Resolution settings. | Clean the lens. Ensure adequate lighting or enable appropriate night vision mode. Check camera resolution settings in the app/NVR. |
| False alarms | Motion detection too sensitive; Incorrect alarm area. | Adjust motion detection sensitivity. Refine the alarm detection area to exclude irrelevant zones. Utilize Human Detection feature. |
| Two-way audio not working | Microphone/speaker muted; Volume too low; Network latency. | Check mute settings and volume levels in the app. Ensure a stable network connection. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Techage |
| Model Number | XM-63-AI-50W |
| High Definition | 5.0 Megapixels (also available in 3MP) |
| Megapixels | 5 MP |
| Lens (mm) | 3.6mm |
| Connectivity | 2.4G WiFi (Does not support 5G WiFi) |
| Video Compression Format | H.265 |
| IR Distance (m) | 20M-30M |
| Color Night Vision | Yes |
| Audio Support | Two-Way Audio |
| AI Functions | Human Detection |
| Alarm Action | Email Photo, Local Alarm |
| TF Card Storage | Max support 128G |
| Shell Material | Metal |
| IP Rating | IP66 |
| Operating Temperature | -10°C to 60°C |
| Installation | Ceiling, Normal, Wall Mounted |
| Supported Mobile Systems | Android, iOS |
| APP Remote Viewing | iCsee/XMeye |
8. User Tips
- For optimal performance, ensure your WiFi signal strength is strong at the camera's installation location.
- Regularly check the mobile app for notifications and review recorded events to stay informed about your property's security.
- When setting up human detection, carefully define the detection zones to avoid unnecessary alerts from public areas or moving foliage.
- Consider using a high-quality TF card from a reputable brand for reliable local storage.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your seller or visit the official Techage website.
This product is certified with CE, ensuring compliance with European safety, health, and environmental protection requirements.
