NANKADF Adjustable DC Power Supply

Contents

NANKADF Adjustable DC Power Supply

User Manual

Models: 30V 10A, 60V 5A, 120V 3A Series

1. Introduction

This NANKADF series product is a miniature switching DC power supply designed for precision control. The output voltage and current can be individually adjusted using variable resistors, offering enhanced convenience and accuracy. The front panel features a high-precision digital display for voltage, current, and power, providing clear real-time operational status and parameters.

Key Features:

  • Compact Design: Small size, lightweight (approx. 1.6 kg / 2.6 lbs), and high power density for portability.
  • Automatic Switching: Seamless transition between constant voltage (CV) and constant current (CC) modes.
  • High Precision Display: LED display for voltage, current, and power with high accuracy.
  • Adjustable Output: Continuously adjustable output voltage and current from 0 to nominal values with fine and coarse regulation.
  • Multiple Protections: Includes Over Voltage Protection (OVP), Over Current Protection (OCP), Over Temperature Protection (OTP), Over Power Protection, Short Circuit Protection, and Leakage Protection.
  • Efficient Cooling: Temperature-controlled fan for low noise and extended lifespan.
  • Dual Voltage Input: Supports AC 230V/115V ±10% input, 50Hz/60Hz.
  • USB Fast Charging: Supports multiple fast charging protocols.
  • Memory Presets: Three sets of data storage functions (M1-M3) for frequently used values.

2. Specifications

ParameterValue
TypePower Supply
Rated Capacity40-1000VA (includes 40VA)
Output Power201 - 300W
Output Current0-10A
Output Frequency50Hz/60Hz
Output TypeSINGLE
Input VoltageAC 230V/115V ±10%; 50Hz/60Hz
Working Temperature0℃~40℃; Relative Humidity: <80%RH
Storage Temperature-10℃~70℃; Relative Humidity: <70%RH
Voltage Stability (CV)0.1%±3mV
Load Stability (CV)0.2%±3mV
Ripple Voltage (CV)≤0.5% Vp-p
Current Stability (CC)0.1%±3mA
Load Stability (CC)0.2%±3mA
Ripple Current (CC)≤0.5% Vp-p
Recovery Time (CC)≤500μS
Temperature Coefficient (CC)≤100ppm/℃
Display TypeLED digit display
Display Accuracy0.5%±digits
Display ResolutionVoltage 0.1V/0.01V, Current 0.01A/0.001A
Dimensions (approx.)190mm x 90mm x 145mm
Weight (approx.)1.15 kg - 1.6 kg (depending on model)
CertificationCE, FCC

3. Package Contents

Please check the package carefully upon receipt to ensure all items are present and undamaged:

  • 1x NANKADF DC Power Supply Unit
  • 1x Input Power Cord (EU, US, UK, or AU type, depending on region)
  • 1x Output Power Cord (U-shaped output cable)
  • 1x User Manual / Operating Instructions
NANKADF DC Power Supply and accessories including power cord, output cables, and user manual.
Image: Typical package contents for the NANKADF DC Power Supply.

4. Product Overview

Familiarize yourself with the various components and controls of your NANKADF DC Power Supply.

Front panel diagram of NANKADF DC Power Supply showing output voltage display, voltage stabilizing indicator light, constant current indicator light, output current display, short circuit indicator, power output display, output indicator light, output switch, USB interface, voltage regulation knob, power switch, current regulation knob, output positive, ground terminal output, output negative.
Image: Front Panel Overview (Example Model)
Detailed front panel analysis of NANKADF DPS3010U model, highlighting voltage output show, stable voltage indicator light, voltage output display, current output, USB fast charging interface, short-circuit alarm switch, power switch, earth terminal (green), positive polarity (red), negative polarity (black), encoder adjustment, voltage rough, constant current indicator light, voltage fine tune, current rough, current fine tune, voltage/current switching key, OCP short circuit protection switch, power switch, output indicator light.
Image: Detailed Front Panel Analysis (DPS3010U Model)
Rear panel of NANKADF DC Power Supply showing cooling fan, 115V/230V input voltage switch, power input interface, and fuse box.
Image: Rear Panel Overview

Controls and Indicators:

  • Digital Display: Shows real-time Voltage (V), Current (A), and Power (W).
  • Voltage Knob: Adjusts the output voltage. May include coarse and fine adjustments.
  • Current Knob: Adjusts the output current. May include coarse and fine adjustments.
  • Output Button: Toggles the power output ON/OFF.
  • OCP Button/Switch: Activates/deactivates Over Current Protection mode.
  • USB Interface: For fast charging compatible devices.
  • Power Switch: Main power ON/OFF switch.
  • Output Terminals: Red (+) for positive, Black (-) for negative, Green for ground.
  • Voltage Selector Switch (Rear): Selects between 115V and 230V input voltage.
  • Cooling Fan (Rear): Automatically operates based on internal temperature.
  • Fuse Box (Rear): Contains the main fuse for protection.

5. Setup Instructions

5.1 Input Voltage Selection

  1. Before connecting the power supply to the mains, locate the voltage selector switch on the rear panel.
  2. Ensure the switch is set to the correct voltage for your region (115V or 230V). If your area uses 110V, set the switch to 115V.
  3. Incorrect voltage selection can damage the unit.
Rear panel of NANKADF DC Power Supply showing cooling fan, 115V/230V input voltage switch, power input interface, and fuse box.
Image: Rear Panel with Voltage Selector Switch

5.2 Connecting Output Cables

  1. Connect the red output cable to the red (+) terminal and the black output cable to the black (-) terminal on the front panel.
  2. If grounding is required for your application, connect a ground wire to the green ground terminal.
  3. Ensure all connections are secure before powering on the unit.

6. Operating Instructions

6.1 Power On/Off

  1. After ensuring correct input voltage selection and secure output connections, plug the power cord into a suitable AC outlet.
  2. Flip the main power switch on the front panel to the 'ON' position. The display will light up.
  3. To enable or disable the output to your load, press the 'Output' button on the front panel. The 'OUT' indicator will illuminate when output is active.
Diagram showing the output button and its function to turn on or turn off the power supply output status. Also shows OCP short circuit alarm switch.
Image: Output Button Operation and OCP Switch

6.2 Adjusting Voltage and Current

  1. Use the 'VOLTAGE' knob to adjust the output voltage. Pressing the knob may switch between adjusting different digits for fine-tuning.
  2. Use the 'CURRENT' knob to adjust the output current. Similarly, pressing the knob may switch between adjusting different digits.
  3. Observe the digital display to set the desired voltage and current values.
Diagram illustrating the precision encoder adjustment knobs for Voltage and Current. Pressing the knob switches the digit to adjust, and rotating sets the value.
Image: Precision Encoder Adjustment Knobs

6.3 Over Current Protection (OCP) Mode

The OCP feature protects your load from excessive current. When a short circuit occurs, the power supply will cut off output and sound an alarm. Output will automatically recover after the short circuit is removed.

  1. To activate OCP mode, long-press the 'CURRENT' knob (or the dedicated OCP button if present on your model). The 'OCP' indicator will light up.
  2. To deactivate OCP mode, long-press the 'CURRENT' knob again.
Diagram showing the OCP short circuit alarm switch. When short-circuit, power supply cuts off with beeping alarm and automatically recovers after lifting. Also shows output button turn on/off.
Image: OCP Short Circuit Alarm Switch

6.4 USB Fast Charging

The power supply includes a USB interface for fast charging compatible devices.

  1. Connect your device to the USB-A or USB-C port on the front panel using a compatible charging cable.
  2. The power supply will automatically detect and provide fast charging according to the device's protocol.
NANKADF DC Power Supply with USB-A and USB-C ports, demonstrating fast charging of two mobile phones simultaneously.
Image: USB Fast Charging Function

6.5 Data Storage (Memory Presets)

Some models feature three memory presets (M1, M2, M3) to store and recall frequently used voltage and current settings.

  1. To save a setting: Adjust the voltage and current to the desired values. Long-press one of the M1/M2/M3 buttons until the display indicates the setting is saved.
  2. To recall a setting: Short-press the corresponding M1/M2/M3 button. The stored voltage and current will be loaded.
Diagram showing three sets of data storage functions (M1-M3 buttons) on the NANKADF DC Power Supply, allowing users to preset and recall voltage and current values.
Image: Data Storage Functions (M1-M3)

6.6 Video Demonstration

Video: Demonstration of the NANKADF Adjustable Regulated DC Power Supply, showcasing its features like encoder adjustment, OCP mode, and USB fast charging.

7. Maintenance

7.1 Cooling Fan Operation

The cooling fan inside the power supply is intelligently temperature-controlled. It will only activate when the internal temperature exceeds 50 degrees Celsius. If the temperature is below 50 degrees Celsius, the fan will remain off. This design optimizes energy efficiency and minimizes operational noise.

7.2 General Care

  • Keep the power supply in a clean, dry, and well-ventilated area.
  • Avoid blocking the ventilation openings on the sides and rear of the unit.
  • Clean the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the power supply is disconnected from the mains before cleaning or performing any maintenance.

8. Troubleshooting

8.1 No Power / Display Off

  • Check if the power cord is securely plugged into both the power supply and the AC outlet.
  • Verify that the main power switch on the front panel is in the 'ON' position.
  • Inspect the fuse in the fuse box on the rear panel. If blown, replace it with a fuse of the same rating.

8.2 No Output Power

  • Ensure the 'Output' button is pressed and the 'OUT' indicator is lit.
  • Check if OCP (Over Current Protection) is active. If the 'OCP' indicator is lit, a short circuit or overcurrent condition may be present. Remove the load, clear the fault, and reset OCP if necessary.
  • Verify that the output cables are correctly and securely connected to the terminals and the load.
  • Confirm that the voltage and current settings are appropriate for your load and not set to zero.

8.3 OCP Alarm Triggered

  • The OCP alarm indicates that the output current has exceeded the set limit or a short circuit has occurred.
  • Immediately disconnect the load and inspect it for any faults or short circuits.
  • Once the fault is cleared, the power supply should automatically recover. If not, cycle the 'Output' button or power cycle the unit.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always refer to the detailed operating instructions for safe and effective use.

10. Warranty and Support

This NANKADF DC Power Supply comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Provide your purchase details and a clear description of the issue to receive prompt support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.