Introduction
The GWUYU JZ30 EV Charging Station is a wall-mounted AC electric vehicle charger designed for convenient and efficient charging. This manual provides essential information for the safe installation, operation, and maintenance of your charging station.
Key Features:
- Indicator light for clear charging status display.
- 5-meter cable length for flexible placement.
- Type A Leakage Protection for enhanced safety.
- Plug and Play functionality for ease of use.
- Multiple protection features including overcurrent, short circuit, over-voltage, undervoltage, over temperature, flame retardant, lightning, leakage, electrostatic, waterproof, and dustproof.
- IP65 rating for dust and water resistance.
- CE Certified, ensuring quality and safety.
Overview of GWUYU JZ30 EV Charging Station features.
Setup and Installation
Proper installation is crucial for the safe and efficient operation of your EV charging station. It is recommended that installation be performed by a qualified electrician.
Package Contents:
- EV Charging Station Unit
- Instruction Manual
- Holster (gift)
- Mounting Plate
- Screws and Expansion Pipes
Video: Installation steps for the GWUYU JZ30 Wall-Mounted Type 2 AC EV Charging Station, including unboxing, circuit breaker wiring, mounting plate installation, holster installation, main unit mounting, and cable connection.
Installation Steps:
- Unboxing and Inspection: Carefully unpack all components. Ensure the instruction manual, holster, mounting plate, screws, and the charging station unit are present and undamaged.
- Mounting Plate Installation:
- Use a 6mm electric drill to create four holes at the desired mounting height on the wall.
- Insert expansion pipes into the drilled holes.
- Position the steel mounting plate over the holes and secure it firmly with the provided screws.
Dimension diagram of the GWUYU JZ30 EV Charging Station (320mm x 190mm x 103mm).
- Circuit Breaker Wiring:
Install a suitable circuit breaker (MCB) in your electrical panel. Pay close attention to the correct wiring according to the markings and the specific power configuration (7.6KW, 11KW, or 22KW).
Wiring Diagram for 7.6KW 1Phase 32A: Connect L1 and N ports to a 2P 40A circuit breaker. Ensure PE (ground) is connected.
Wiring Diagram for 11KW 3Phase 16A: Connect L1, L2, L3, and N ports to a 4P 20A circuit breaker. Ensure PE (ground) is connected.
Wiring Diagram for 22KW 3Phase 32A: Connect L1, L2, L3, and N ports to a 4P 40A circuit breaker. Ensure PE (ground) is connected.
Note: For 7KW single-phase installations, only L1 and N ports need to be connected. For 3-phase installations (11KW/22KW), L1, L2, L3, and N ports must be connected.
- Install the Holster (Optional): Position the holster at a convenient location near the charging station. Mark the drilling points, drill holes, and secure the holster with screws. This provides a place to store the charging gun when not in use.
- Mount the Charging Station: Carefully hang the main body of the EV charging station onto the installed mounting plate. Ensure it is securely seated.
- Connect Charging Station Cables: Connect the charging station's power cables to the circuit breaker, following the wiring diagrams provided and ensuring all connections are tight and secure.
- Power On: Turn on the power at the circuit breaker. Confirm that the indicator light on the charging station illuminates, indicating it is powered on and ready for use.
The emergency stop switch provides immediate power-off protection.
Operating Instructions
The GWUYU JZ30 EV Charging Station is designed for simple 'Plug and Play' operation.
Charging Your Electric Vehicle:
- Prepare for Charging: Ensure the charging station is properly installed and connected to power. The LED indicator light should be on, showing it's ready.
- Connect to Vehicle: Open your vehicle's charging port. Take the charging gun from the holster and firmly insert it into the vehicle's charging port.
- Initiate Charging: The charging station will automatically detect the connection and begin charging. The LED indicator will change to reflect the active charging status.
- Monitor Charging: The LED indicator provides a clear display of the charging status at a glance.
- Complete Charging: Once your vehicle is fully charged, or if you wish to stop charging, simply unplug the charging gun from your vehicle.
- Store Cable: Wrap the charging cable neatly around the hook on the charging station or place the charging gun back into its holster.
Visual guide for connecting and disconnecting the EV charging station.
The LED indicator provides clear charging status.
Maintenance
Regular maintenance ensures the longevity and safe operation of your GWUYU JZ30 EV Charging Station.
General Care:
- Cleaning: Keep the charging station clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using abrasive cleaners or solvents.
- Cable Inspection: Periodically inspect the charging cable and connector for any signs of wear, damage, or fraying. If any damage is found, discontinue use and contact customer service.
- Environmental Protection: The charging station has an IP65 rating, making it dustproof and waterproof. It is designed to withstand rain and humid conditions, preventing damage to internal electronic circuits. However, avoid submerging the unit in water.
- Emergency Stop Switch: Ensure the emergency stop switch is easily accessible and functioning correctly. Test it periodically by pressing it and observing the power cut-off.
The IP65 rating ensures safe charging even on rainy days.
Troubleshooting
The GWUYU JZ30 EV Charging Station is equipped with multiple safety features to prevent issues. If you encounter a problem, refer to the following common scenarios:
Common Issues and Solutions:
- Charging Stops Unexpectedly:
- Over Temperature Protection: The station features intelligent temperature protection. If the internal temperature exceeds 85°C, charging will automatically stop. Charging will resume when the temperature drops to 65°C. Ensure adequate ventilation around the unit.
- Circuit Breaker Tripped: Check the circuit breaker in your electrical panel. If it has tripped, reset it. This could be due to overcurrent or a short circuit.
- Vehicle Communication Error: Ensure the charging gun is securely connected to the vehicle's charging port. Disconnect and reconnect if necessary.
- No Power/Indicator Light Off:
- Check Power Supply: Verify that the main power supply to the charging station is active and the circuit breaker is in the 'ON' position.
- Emergency Stop Engaged: Check if the emergency stop switch (red button on the side) has been pressed. Reset it if necessary.
- Slow Charging:
- Vehicle Compatibility: Ensure your vehicle is capable of accepting the full power output of the charging station. Some vehicles may limit charging speed.
- Power Supply: Verify that the electrical installation provides the correct voltage and current for the charging station's rated power.
Safety Protection Functions:
The charging station is equipped with comprehensive protection mechanisms:
- Overcurrent protection
- Short circuit protection
- Over-voltage protection
- Undervoltage protection
- Over temperature protection
- Flame retardant protection
- Lightning protection
- Leakage protection (Type A)
- Electrostatic protection
- Waterproof and dustproof (IP65)
Visual representation of the multiple protection features.
Intelligent Temperature Protection: Stops charging above 85°C, resumes below 65°C.
Specifications
| Feature | Specification |
|---|---|
| Brand | GWUYU |
| Model | JZ30 Plug and Play |
| Charger Type | Type 2 (IEC 62196-2) |
| Power Options | 7.6KW (1 Phase), 11KW (3 Phase), 22KW (3 Phase) |
| Current | 16A (for 11KW), 32A (for 7.6KW & 22KW) |
| Input Voltage | AC 220V-380V |
| Output Voltage | AC 220V-380V |
| Frequency | 50-60 Hz |
| Cable Length | 5M |
| Operating Temperature | -30~50℃ |
| IP Rating | IP65 |
| Product Size | 320 × 190 × 103 mm |
| Shell Material | PC |
| Charging Way | Plug and Play |
| Protection Functions | Overcurrent, Short circuit, Over-voltage, Undervoltage, Over temperature, Flame retardant, Lightning, Leakage, Electrostatic, Waterproof and dustproof |
User Tips
- Vehicle Compatibility: Before purchasing or using, always check your electric vehicle's manual or charging port to determine the correct charging interface (e.g., Type 1, Type 2, GB/T). The GWUYU JZ30 supports the Type 2 (IEC 62196-2) standard and is compatible with 99% of new energy models on the market. If you are unsure, contact the seller to confirm compatibility with your specific car model.
- Power Matching: You can connect an 11KW charger to a vehicle that only supports 7KW. The vehicle's onboard charger will limit the power draw to its maximum supported rate (e.g., 7KW), so it will not damage the vehicle. However, the charging speed will be limited by the vehicle's capacity.
The GWUYU JZ30 is compatible with most new energy electric vehicles.
Guide to choosing the correct charger type based on your vehicle's port.
Warranty and Support
GWUYU is committed to providing high-quality products and excellent customer service.
- Warranty: This product comes with a 2-year warranty.
- Customer Service: 24-hour customer service is available for any inquiries or support needs.
- Quality Assurance: The product is RoHS certified, guaranteeing its quality and adherence to environmental standards.
- Certifications: CE certification ensures the product meets European safety, health, and environmental protection requirements.
GWUYU offers a 2-year warranty and 24-hour customer service.
CE certification ensures quality and safety.
