Introduction
Thank you for choosing the BUCKLOS B715 Dual Crown Inverted Air Fork. This high-performance suspension fork is designed for mountain bikes, downhill bikes, and e-bikes, offering superior damping and control for various terrains. This manual provides essential information for proper installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your fork.
Specifications
| Feature | Detail |
|---|---|
| Product | BUCKLOS Inverted Downhill Air Fork |
| Brand | BUCKLOS |
| Model | B715 |
| Suspension Type | Dual Crown Air Suspension (Air Resilience/Oil Damping) |
| Wheel Size Compatibility | 29 Inch (Fit for 26/27.5/29 Inch) |
| Maximum Tyre Width | 2.8 inches |
| Material | Aluminum Alloy |
| Steerer Tube Type | Straight Tube / Tapered Tube |
| Travel | 180mm |
| Lockout Way | Manual Lockout (ABS Adjustment) |
| Axle Type | 15*110mm Thru Axle (Boost) |
| Steerer Tube Diameter | 28.6mm (1-1/8'' Threadless) |
| Stroke Tube Diameter | 34mm |
| Brake Mount | Disc Brake (A-pillar, hole pitch 74mm) |
| Weight (Approx.) | 29" Straight Tube: 3565g (±50g) 29" Tapered Tube: 3548g (±50g) |
| Compatible Bikes | Mountain Bike, Downhill Bike, E-bike |
| Package Included | 1pc*BUCKLOS Fork |
Dimensional Details
Refer to the diagram below for precise measurements and component layout.
Weight Information
The weight of the fork varies slightly based on the steerer tube type.
Setup and Installation
Proper installation is crucial for the safety and performance of your fork. If you are unsure about any steps, please consult a professional bicycle mechanic.
- Compatibility Check: Ensure your bike's frame is compatible with a dual crown inverted fork, specifically for 26, 27.5, or 29-inch wheels, a 15x110mm Boost thru-axle, and a 1-1/8'' (28.6mm) threadless steerer tube (either straight or tapered). Verify that your brake system uses a disc brake with a 74mm A-pillar hole pitch and that your tires do not exceed 2.8 inches in width.
- Steerer Tube Preparation: Cut the steerer tube to the appropriate length for your frame and stem. Ensure smooth edges and proper chamfering.
- Crown Race Installation: Install the crown race onto the steerer tube. Use appropriate tools to avoid damage.
- Fork Mounting: Insert the steerer tube through the head tube of your bike frame. Install the headset bearings, spacers, and stem according to your bike manufacturer's instructions.
- Thru-Axle Installation: Secure the front wheel using the 15x110mm thru-axle. Ensure it is tightened to the manufacturer's recommended torque specifications.
- Brake Caliper Mounting: Attach your disc brake caliper to the 74mm A-pillar mounts on the fork. Ensure proper alignment and torque for the caliper bolts.
- Handlebar Installation: Mount your handlebars to the stem. Ensure all bolts are tightened securely.
Component Overview
Visual Reference for Installation
Operating Instructions
The BUCKLOS B715 fork features adjustable suspension and damping to fine-tune your riding experience.
-
Suspension Lockout (ABS Adjustment):
Located on the top crown, the ABS adjustment knob allows you to lock or open the suspension. Turn the knob to the 'LOCK' position for climbing or smooth terrain to minimize suspension movement and improve pedaling efficiency. Turn it to the 'OPEN' position for rough terrain to allow full suspension travel and absorb impacts.
-
Damping Adjustment (Rebound):
The rebound damping knob (often red or blue, typically on the lower leg or top crown) controls the speed at which the fork extends after compression. Turn it clockwise for slower rebound (more damping) and counter-clockwise for faster rebound (less damping). Adjust this based on terrain and rider weight to prevent harsh top-outs or packing down on successive bumps.
-
Air Chamber Adjustment:
The air chamber uses compressed air as the rebound medium. Adjusting the air pressure directly affects the fork's stiffness and sag. Use a high-pressure shock pump to add or release air. Refer to recommended pressure settings (if provided by BUCKLOS or a general guide for your weight) and adjust to achieve desired sag and feel. Higher pressure makes the fork stiffer, lower pressure makes it softer.
Maintenance
Regular maintenance will prolong the life of your BUCKLOS fork and ensure consistent performance.
- Cleaning: After each ride, especially in muddy or dusty conditions, clean the stanchions (the smooth upper tubes) and seals with a soft cloth and mild soap and water. Avoid high-pressure washers directly on seals.
- Lubrication: Apply a small amount of suspension-specific lubricant to the stanchions periodically, then cycle the suspension a few times to distribute it. Wipe off any excess.
- Air Pressure Check: Check the air pressure in the air chamber before every ride using a high-pressure shock pump. Adjust as necessary to maintain your preferred sag and stiffness.
- Bolt Torque Check: Periodically check all bolts (crown bolts, thru-axle, brake caliper bolts) for proper torque. Refer to your bike's manual or a reputable mechanic for specific torque values.
- Seal Inspection: Inspect the dust seals for cracks, tears, or excessive wear. Worn seals can lead to contamination and reduced performance. Replace them if necessary.
- Professional Servicing: For internal maintenance, such as oil changes or damper servicing, it is recommended to take your fork to a qualified bicycle mechanic or a BUCKLOS service center.
Troubleshooting
Here are some common issues and their potential solutions:
-
Loss of Air Pressure:
- Check the air valve for leaks.
- Inspect seals for damage or wear. If seals are damaged, professional service is recommended.
-
Poor Damping Performance (too bouncy or too stiff):
- Adjust the rebound damping knob (see Operating Instructions).
- Verify correct air pressure in the air chamber.
- If issues persist, internal damper problems may require professional servicing.
-
Unusual Noises (creaking, clunking):
- Check all bolts (thru-axle, brake caliper, stem, crown bolts) for proper torque.
- Ensure headset is properly adjusted and tightened.
- If noise originates from within the fork, professional inspection is advised.
-
Fork Not Achieving Full Travel:
- Check and adjust air pressure. Too much pressure will limit travel.
- Ensure no obstructions are preventing full compression.
For any complex issues or repairs, always consult a certified bicycle mechanic.
User Tips
- Handlebar Mounting: Some riders prefer direct-mount handlebars for downhill applications. Check your fork's top crown for pre-drilled holes or compatibility with direct-mount stems if you plan to use one. Ensure any aftermarket components are compatible and installed correctly.
- Initial Setup: Spend time experimenting with air pressure and rebound settings on familiar trails to find the optimal setup for your weight, riding style, and local terrain.
- Pre-Ride Check: Always perform a quick pre-ride check, including air pressure, brake function, and general fork integrity, before heading out.
Warranty and Support
For any questions, concerns, or issues regarding your BUCKLOS B715 Dual Crown Inverted Air Fork, please contact the seller or BUCKLOS customer support directly. When contacting support, please provide your purchase details and a clear description of the issue, including any relevant photos or videos.
The seller typically offers support for product-related problems. If you receive a package with goods in question or damage, it is recommended to take videos and photos before signing for the package and contact the seller immediately to confirm and resolve the problem.