FLSUN Q5/QQ-S Pro/SR/Super Racer Leveling Module

Contents

FLSUN 3D Printer Auto Leveling Sensor Touch Module User Manual

Model: FLSUN Q5/QQ-S Pro/SR/Super Racer Leveling Module

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your FLSUN 3D Printer Auto Leveling Sensor Touch Module. This module is designed to enhance the auto-leveling capabilities of compatible FLSUN 3D printers, ensuring more precise and consistent prints.

FLSUN Auto Leveling Sensor with wiring harness
Image: FLSUN Auto Leveling Sensor with wiring harness.

2. Safety Instructions

  • Read carefully before installation and operation.
  • Keep accessories dry and clean; avoid dust, moisture, and high temperatures.
  • Do not touch hot components (nozzles, heaters) during operation.
  • Unplug the power supply before replacing or maintaining accessories.
  • Keep out of reach of children.

3. Compatibility

This accessory is compatible with FLSUN 3D printers, specifically models FLSUN QQ-S PRO, Q5, and Super Racer.

Confirm your printer model and size before purchase to avoid installation errors.

4. Package Contents

  • 1 x Leveling Switch Sensor
  • 1 x Accessory Kit (includes necessary screws and connectors)
Leveling Sensor Modules and Accessory Kit
Image: Leveling Sensor Modules and Accessory Kit, showing the sensor and its wiring.

5. Specifications

FeatureDetail
Item TypeLeveling Modules
Assembly RequiredYes
Control MethodOthers
Item ShapeFlat
Product Weight15g / 0.5oz
Dimensions (L x W x H)3.2 x 2.4 x 2.4 cm
OriginMainland China
Leveling Points6+21 points for full coverage
Dimensions of the FLSUN Leveling Sensor
Image: Dimensions of the FLSUN Leveling Sensor, showing measurements of 3.2cm, 2.4cm, and 2.4cm.
Leveling Sensor with 6+21 point coverage diagram
Image: Diagram illustrating the 6+21 point, full coverage, multi-dimensional leveling capability of the sensor.

6. Setup (Installation Guide)

  1. Power off the printer and disconnect power.
  2. Remove old or damaged accessories.
  3. Install new parts according to the original structure.
  4. Ensure screws are tightened and connections are stable.
  5. Calibrate the printer after installation.

7. Operating (Usage Notes)

  • Use only high quality filaments to prevent clogging.
  • Do not overload or force components during operation.
  • Regularly clean and lubricate moving parts (rods, bearings, gears).
  • Replace worn parts in time to ensure printing quality.

8. Maintenance

  • Clean nozzles, heat beds, and fans regularly.
  • Store accessories in a dry, dust-free environment.
  • Avoid impact or excessive bending of fragile parts.

9. Troubleshooting

  • Clogged nozzle: Clean with needle or cold pull.
  • Loose connection: Reinstall and tighten screws.
  • Abnormal noise: Check for friction or misalignment.
  • Poor printing quality: Calibrate bed, replace worn parts.

10. User Tips

  • Ensure the sensor is securely fixed in its housing before installation, as some users have reported it being loose upon arrival. If loose, carefully re-secure it.
  • After installation, calibrate your 3D printer thoroughly to ensure optimal auto-leveling performance and consistent print quality.
  • Verify compatibility with your specific FLSUN printer model (Q5, QQ-S Pro, SR) to avoid issues. Note that the cable might be too short for the FLSUN V400 printer, requiring a different sensor or an extension.

11. Warranty & Support

Warranty Information

This product is for replacement use only. The warranty does not cover damage caused by improper use, modification, or external force.

Contact Information

For further assistance, you can contact FLSUN support via email at service@flsun3d.com or visit their official website at www.flsun.com.

A detailed user manual in PDF format is also available for download. Please refer to the official FLSUN website or the product page for the PDF document: FLSUN 3D Printer Accessories User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.