1. Introduction
Thank you for choosing the TOKQI C01S Wireless Selfie Stick Tripod. This versatile device combines a selfie stick, a stable tripod, and a detachable fill light, designed to enhance your photography and video recording experience with smartphones. Its compact and lightweight design makes it ideal for travel, vlogging, live streaming, and capturing group photos.
2. Safety Information
- Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
- Keep the device away from water and other liquids.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
- Ensure the phone is securely mounted before extending the stick or using the tripod.
- Keep the remote control battery (CR2032) out of reach of children.
3. Package Contents
Please check the package for the following items:
- TOKQI C01S Selfie Stick Tripod
- Wireless Remote Control
- USB Charging Cable (for fill light, if applicable)
- User Manual
4. Product Overview
The TOKQI C01S is designed for ease of use and portability. It features a compact, foldable design, a multi-section extendable rod, a stable tripod base, a detachable phone holder, a wireless Bluetooth remote, and an integrated fill light.
5. Specifications
| Feature | Specification |
|---|---|
| Model Number | C01, C01s |
| Material | Stainless Steel + ABS |
| Folded Length | 196mm (C01), 196x54x41mm (C01s) |
| Max Extended Length | 1060-1070mm |
| Weight | 156g (C01), 167g (C01s) |
| Support Phone Size | 65-95mm |
| Communication | Bluetooth |
| Remote Battery | CR2032 |
| Remote Compatible OS | Android 4.4 or above, iOS 5.1 or above |
| Fill Light | Removable, 3-color temperature, 6-gear adjustment |
6. Setup Instructions
6.1 Mounting Your Phone
- Gently pull open the phone holder clip.
- Insert your smartphone into the clip, ensuring it is centered and securely held. The clip supports phones between 65-95mm in width.
- For optimal balance, ensure the phone is placed evenly.
6.2 Pairing the Wireless Remote Control
- Locate the remote control on the selfie stick handle. It is removable.
- Push the 'Power' key (up arrow) to turn on the remote. The indicator light will flash.
- On your smartphone, go to Bluetooth settings and search for new devices.
- Select 'Selfie' or a similar device name to pair.
- Once successfully paired, the indicator light on the remote will turn off.
6.3 Attaching/Detaching the Fill Light
- The fill light is located at the top of the phone holder.
- To detach, gently slide it off. To attach, slide it back into place until it clicks securely.
7. Operating Instructions
7.1 Selfie Stick Mode
- Hold the handle firmly.
- Extend the telescopic rod to your desired length (up to 1070mm).
- Adjust the phone holder angle (up to 360° rotation and 225° tilt) for the perfect shot.
- Use the wireless remote to capture photos or start/stop video recording.
7.2 Tripod Mode
- Fold out the three legs at the bottom of the handle to form a stable tripod base.
- Place the tripod on a flat, stable surface.
- Extend the telescopic rod to the desired height.
- Adjust the phone holder angle as needed.
- Use the wireless remote for hands-free shooting.
7.3 Fill Light Operation
- Press and hold the button on the fill light to turn it on.
- Single-press the button to cycle through the three color temperatures (White, Warm, Natural) and six brightness gears.
- Press and hold again to turn off the fill light.
8. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the selfie stick in a cool, dry place when not in use. Ensure it is folded compactly to prevent damage.
- Battery Replacement (Remote): The remote control uses a CR2032 coin cell battery. To replace, gently pry open the remote casing, remove the old battery, and insert a new one with the correct polarity.
- Fill Light Charging: If your fill light is rechargeable, use the provided USB cable to charge it. The indicator light will show charging status.
9. Troubleshooting
9.1 Remote Control Issues
Problem: The remote control button only takes photos, or doesn't turn on the phone's camera.
- Solution 1: Ensure the remote is properly paired with your phone via Bluetooth. If not, unpair and re-pair it.
- Solution 2: Check the remote control battery (CR2032). If the indicator light does not flash when powered on, the battery may be dead and needs replacement.
- Solution 3: Some phone camera apps may require specific settings for external remotes. Check your camera app settings.
9.2 Tripod Stability
Problem: The tripod feels unstable.
- Solution: Ensure the tripod legs are fully extended and placed on a flat, even surface. Avoid placing it on soft or uneven ground.
9.3 Fill Light Not Working
Problem: The fill light does not turn on or is dim.
- Solution: Ensure the fill light is securely attached. If it's rechargeable, check if it needs charging. If it uses a replaceable battery, check or replace the battery.
10. User Tips
- Optimal Selfie Length: Experiment with the 7-section extension to find your ideal selfie length, often around 70-80% extension for a balanced shot.
- Hands-Free Video Calls: Utilize the tripod mode and detachable phone holder for stable video calls or watching content without holding your phone.
- Night Photography: Don't forget to use the detachable fill light in low-light conditions. Cycle through the three color temperatures to match your environment or desired mood.
- Quick Disassembly: When detaching your phone, remember to rotate it to the vertical screen position first for easier removal, as indicated in the product images.
11. Warranty and Support
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or TOKQI customer service through your purchase platform. Please retain your proof of purchase for warranty purposes.
12. Product Demonstration Video
Watch this video for a visual guide on how to use your TOKQI C01S Selfie Stick Tripod:
