1. Introduction
The UTRAI Jstar 5 is a versatile 4-in-1 device designed to provide essential roadside assistance and portable power. It combines a powerful jump starter, a high-pressure air compressor, a portable power bank, and a multi-mode LED flashlight into a single compact unit. This manual provides detailed instructions for safe and effective use of all its functions.

Figure 1: UTRAI Jstar 5 - 4 in 1 Car Starting Device
2. Important Safety Information
Please read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Keep the device away from children.
- Do not expose the device to rain or extreme temperatures.
- Do not disassemble the device. Refer all servicing to qualified personnel.
- Ensure proper ventilation when using the air compressor.
- Always connect the jump starter clamps correctly to the battery terminals (red to positive, black to negative). Reverse connection will trigger an alert.
- Disconnect the smart clamps from the jump starter immediately if a short-circuit or reverse connection alert occurs.
- Do not inflate tires for more than 8 minutes continuously. Allow the device to cool down between uses.
- Wear eye protection when operating the jump starter or air compressor.
3. What's in the Box
Carefully unpack your UTRAI Jstar 5 and ensure all items are present:
- UTRAI Jstar 5 Jump Starter & Air Compressor Unit
- Smart Jumper Clamps
- EVA Protective Carrying Case
- USB Charging Cable
- DC Cigarette Lighter Adapter
- Valve Adapters (x3)
- User Manual (this document)

Figure 2: Contents of the UTRAI Jstar 5 package
4. Product Overview
The UTRAI Jstar 5 features a robust design with intuitive controls and a clear digital display.

Figure 3: Digital LCD and Control Buttons
4.1. Components and Controls
- Digital LCD Display: Shows battery level, tire pressure, and selected modes.
- 5-in-1 Button: Used for navigation, selection (OK), and mode switching (M).
- Power Button: Activates the device.
- ON/OFF Switch: For the air compressor function.
- Jump Starter Port: For connecting the smart jumper clamps.
- Air Hose Storage: Integrated storage for the air hose.
- Type-C Input: For charging the Jstar 5 unit.
- USB Output (QC3.0): For fast charging electronic devices.
- DC Output: For powering 12V devices.
- LED Light: Multi-mode flashlight.

Figure 4: Charging and Output Ports
5. Charging the UTRAI Jstar 5
Before first use, fully charge your UTRAI Jstar 5. It is recommended to recharge the unit every 3-6 months to maintain battery health, even when not in use.
- Locate the Type-C Input port on the device.
- Connect the provided USB charging cable to the Type-C Input port and to a suitable USB power adapter (not included) or a car charger.
- The digital LCD display will indicate the charging status. The unit is fully charged when the display shows 100%.
6. Jump Starting Your Vehicle
The UTRAI Jstar 5 can jump start vehicles with up to 8.0L gas engines and 6.5L diesel engines.
Video 1: Product Demonstration (Jump Starting, Tire Inflation, Power Bank, LED Light)
6.1. Step-by-Step Instructions
- Prepare the Device: Open the protective cover on the jump starter port.
- Connect Smart Clamps: Insert the smart clamps cable firmly into the jump starter port. The red and green lights on the smart clamps will flash alternately.
- Connect to Car Battery: Attach the red clamp to the positive (+) terminal of your car battery and the black clamp to the negative (-) terminal. The green light on the smart clamps will stay on if connected correctly.
- Start Vehicle: Go into your vehicle and start the engine.
- Remove Clamps: Once the vehicle starts, immediately remove the smart clamps from the car battery within 30 seconds, then disconnect them from the jump starter.

Figure 5: How to Jump Start Your Vehicle
6.2. Safety Alert
NOTICE: If the smart clamps are short-circuited or reverse connected, an alert (red light) will activate. Disconnect the smart clamps immediately to prevent damage.
7. Inflating Tires with the Air Compressor
The integrated air compressor can inflate tires up to 150 PSI and comes with four inflatable nozzles for various items.

Figure 6: Cordless Tire Inflator in use
7.1. Step-by-Step Instructions
- Activate Device: Press the Power Button to turn on the Jstar 5.
- Access Air Hose: Take out the air hose from its storage compartment on the back of the jump starter.
- Select Mode: Press the 'OK' button, then press the 'M' button to switch between inflating modes (e.g., car, motorcycle, bicycle, ball).
- Set Pressure: Use the '+' and '-' buttons to increase or decrease the desired air pressure. Refer to your car's standard tire pressure value.
- Connect Air Hose: Securely connect the air hose to the tire valve. Your tire's current pressure will be displayed on the LCD.
- Start Inflation: Turn the ON/OFF switch for the air compressor to the 'ON' position to begin inflation.
- Stop Inflation: The compressor will automatically shut off once the preset pressure is reached. Turn the ON/OFF switch to 'OFF' and remove the air hose.

Figure 7: Four Inflatable Nozzles
7.2. Important Note
NOTICE: Do not inflate for more than 8 minutes continuously. Allow the device to cool down for at least 10 minutes after 8 minutes of continuous use to prevent overheating.
8. Power Bank Function
The UTRAI Jstar 5 features a large capacity battery (16000mAh) and multiple output ports to charge your electronic devices.
8.1. Charging Electronic Devices
- USB Output (QC3.0): Connect your device's USB charging cable to the USB QC3.0 port for fast charging.
- DC Output: Use the DC output port with the provided DC cigarette lighter adapter to power 12V devices like car vacuum cleaners or portable refrigerators.

Figure 8: Charging multiple devices
9. LED Flashlight
The built-in LED flashlight offers three modes for various situations:
- Normal: Provides steady illumination for general use.
- Flashing: A blinking light for signaling or attracting attention.
- SOS: Emits the international Morse code distress signal.
To activate the LED light, press the dedicated light button. Press again to cycle through the modes.

Figure 9: LED Light Modes
10. Specifications

Figure 10: Jump Starter Capacity
| Feature | Specification |
|---|---|
| Brand Name | UTRAI |
| Model | Jstar 5 |
| Peak Current | 2000A |
| Battery Capacity | 16000mAh (typical) / up to 24000mAh (variant) |
| Voltage | 12V |
| Air Compressor Pressure | 150PSI |
| Gas Engine Rating | Up to 8.0L |
| Diesel Engine Rating | Up to 6.5L |
| Number of Starts (approx.) | 50 |
| Item Weight | 2500g |
| Fast Charge | One Way Fast Charge (USB QC3.0) |
| Special Features | USB Output, DC Output, LED Lighting |
| Conversion Rate | 85%~90% |
| External Testing Certification | ROHS, FCC, CE |
| Number Of Built-in Batteries | 4 |
11. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the UTRAI Jstar 5 in its protective carrying case in a cool, dry place away from direct sunlight and moisture.
- Recharging: For optimal battery life, recharge the unit every 3-6 months, even if it has not been used.
- Cable Care: Inspect jumper cables and air hoses for any damage before each use. Replace if necessary.
12. Troubleshooting
12.1. Jump Starter Issues
- Device not turning on: Ensure the unit is sufficiently charged. Recharge if the battery level is low.
- Smart clamps alert (red light): This indicates a short-circuit or reverse connection. Immediately disconnect the clamps from the car battery and the jump starter, then re-connect them correctly (red to positive, black to negative).
- Vehicle not starting after connection: Check that the clamps are securely attached to the battery terminals. Ensure the vehicle's battery is not completely dead or severely damaged. If the issue persists, consult a professional mechanic.
12.2. Air Compressor Issues
- Compressor not starting: Ensure the device is powered on and the air compressor ON/OFF switch is in the 'ON' position. Check battery level.
- Inaccurate pressure reading: Ensure the air hose is securely connected to the tire valve.
- Overheating: If the compressor runs for an extended period (more than 8 minutes), it may overheat and shut off. Allow it to cool down before resuming use.
13. User Tips
- Vehicle Compatibility: The Jstar 5 is powerful enough for most passenger cars, SUVs, and light trucks. For larger vehicles like some tractors (e.g., 4.5L diesel), verify the engine displacement against the device's specifications (8.0L gas / 6.5L diesel) to ensure compatibility.
- Battery Type: The internal battery is designed for high-current output for jump-starting. While the exact chemistry isn't specified, it's a robust 12V system suitable for its intended functions.
- Inflation Time: To prolong the life of the air compressor, avoid continuous operation for more than 8 minutes. Take short breaks if inflating multiple tires or large items.
14. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official UTRAI website. Keep your purchase receipt as proof of purchase.