Introduction
The UTRAI T1 Portable Jump Starter is a versatile device designed to provide emergency jump-starting for vehicles and serve as a portable power bank for electronic devices. With its robust design and smart protection system, it offers a reliable solution for unexpected battery issues and on-the-go charging needs.
Package Contents
Please check the box for the following items:
- UTRAI T1 Jump Starter Unit
- Smart Battery Clamps (Red and Black)
- USB-A to USB-C Charging Cable
- User Manual (this document)
- Storage Box
Product Overview
Familiarize yourself with the components and features of your UTRAI T1 Jump Starter.
- Black Battery Clamp: Connects to the negative (-) terminal of the vehicle battery.
- Red Battery Clamp: Connects to the positive (+) terminal of the vehicle battery.
- EC5 Output Port: Connects to the smart battery clamp plug for jump-starting.
- LED Flashlight: Provides illumination with multiple modes.
- USB-A Output Port: For charging external electronic devices.
- Battery Clamp Plug: Connects the smart clamps to the jump starter's EC5 port.
- Indicators: Display battery charge level and operational status.
- Power Button: Turns the device on/off and cycles through flashlight modes.
- USB-C Input Port: For charging the jump starter unit.
Specifications
| Feature | Specification |
|---|---|
| Model | T1 |
| Peak Current | 1400A |
| Vehicle Voltage | 12V |
| Engine Compatibility (Gas) | Up to 6.5L |
| Engine Compatibility (Diesel) | Up to 5.0L |
| Battery Capacity | 8000 - 10000 mAh (Internal) |
| Number of Built-in Batteries | 4 |
| USB-A Output | 5V/2.1A |
| USB-C Input | 5V/2A |
| Conversion Rate | 85%~90% |
| Operating Temperature | -20°C to 60°C |
| Protection Features | Short Circuit, High/Low Temperature, Surge Voltage, High/Low Voltage, Over Discharge, Over Current |
| Dimensions (L x W x H) | 18 cm x 5 cm x 10 cm |
| Weight | 0.71 kg |
| Certifications | CE |
Safety Information
- Read all instructions before using the product.
- Do not operate the jump starter if it is damaged.
- Keep out of reach of children.
- Do not expose the product to rain or extreme moisture.
- Do not disassemble the unit. Refer to qualified service personnel for repairs.
- Ensure proper polarity when connecting to a vehicle battery (Red to Positive, Black to Negative).
- Avoid short-circuiting the smart clamps.
- Use the product in a well-ventilated area.
- Do not jump start a frozen battery.
- If the jump starter becomes excessively hot during use, disconnect it immediately and allow it to cool.
Setup and Initial Charging
Before first use, fully charge your UTRAI T1 Jump Starter.
- Connect the provided USB-A to USB-C charging cable to the USB-C Input Port (9) on the jump starter.
- Connect the other end of the cable to a 5V/2A USB wall adapter (not included) or a powered USB port.
- The indicator lights (7) will illuminate to show the charging progress. All lights will be solid when fully charged.
- A full charge typically takes several hours.
Operating Instructions
Jump Starting a Vehicle
Ensure the jump starter is at least 75% charged before attempting to jump start a vehicle.
- Insert the Smart Clip: Firmly insert the Battery Clamp Plug (6) of the smart clamps into the EC5 Output Port (3) on the jump starter. Ensure a secure connection.
- Connect to Vehicle Battery: Attach the Red Battery Clamp (2) to the positive (+) terminal of the vehicle's battery. Attach the Black Battery Clamp (1) to the negative (-) terminal of the vehicle's battery. Ensure the clamps make good contact with the battery terminals.
- Start the Vehicle: Once the clamps are correctly connected, start your vehicle's engine. Do not crank for more than 3 seconds. If the vehicle does not start, wait at least 30 seconds before trying again.
- Remove Jumper Cable: After the vehicle starts, immediately remove the smart clamps from the vehicle battery, then disconnect the smart clamp plug from the jump starter.
Using as a Portable Power Bank
The UTRAI T1 can charge various electronic devices.
- Connect your device's charging cable to the USB-A Output Port (5) on the jump starter.
- The jump starter will automatically begin charging your device.
- Monitor your device's charging status.
Using the LED Flashlight
The built-in LED flashlight has three modes for emergency situations or general illumination.
- Press and hold the Power Button (8) for a few seconds to turn on the flashlight (Stable mode).
- Press the Power Button (8) again to cycle through the modes: Stable > SOS > Strobe.
- Press and hold the Power Button (8) again to turn off the flashlight.
Charging the Jump Starter
To recharge your UTRAI T1 Jump Starter:
- Connect the provided USB-A to USB-C charging cable to the USB-C Input Port (9) on the jump starter.
- Connect the other end of the cable to a 5V/2A USB wall adapter or a powered USB port.
- The indicator lights (7) will show the charging status. All lights will be solid when charging is complete.
Maintenance
- Storage: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. It is resistant to temperatures between -20°C and 60°C.
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Battery Life: For optimal battery life, recharge the unit every 3-6 months, even if not in use.
- Water Resistance: The unit is super waterproof, but avoid submerging it in water.
Troubleshooting
- Jump Starter Not Turning On: Ensure the unit is charged. If the battery is completely depleted, it may take a few minutes of charging before the indicators respond.
- Vehicle Not Starting:
- Check that the smart clamps are securely connected to the correct battery terminals (Red to +, Black to -).
- Ensure the smart clamp plug is fully inserted into the EC5 port on the jump starter.
- The vehicle battery might be severely discharged or faulty. The jump starter is designed for starting vehicles with weak batteries, not completely dead or damaged ones.
- The vehicle's engine size might exceed the jump starter's capacity (6.5L Gas / 5.0L Diesel).
- Smart Clamps Indicator Lights: Refer to the smart clamp's built-in indicator lights (if present) for specific error codes (e.g., reverse polarity, short circuit).
- Slow Charging of External Devices: Ensure your device's charging cable is functioning correctly. The USB-A output is 5V/2.1A, which may not be fast charging for all devices.
User Tips
- Check Charge Level: Always check the indicator lights on the jump starter to ensure it has sufficient charge before attempting to jump start a vehicle. The indicators signal the percentage of charge.
- Multiple Starts: A fully charged UTRAI T1 can provide approximately 30 jump starts on a single charge, depending on the vehicle and battery condition.
- Cold Weather Performance: The device is designed to operate in low temperatures down to -20°C, making it suitable for winter use.
- Regular Recharging: To prolong the lifespan of the internal battery, it is recommended to recharge the jump starter every few months, even when not in active use.
Warranty and Support
Your UTRAI T1 Portable Jump Starter comes with a 365-day free replacement warranty. For any issues or support inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.
