1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your SMAEL Tactical Watch Model 8079. This robust dual-display digital sports watch is designed for durability and functionality, featuring a 50m water resistance, luminous display, stopwatch, alarm, and calendar functions. Please read this manual carefully to ensure optimal performance and longevity of your watch.
2. Watch Components and Button Functions
Your SMAEL Tactical Watch Model 8079 features a combination of analog and digital displays, controlled by four buttons and a crown.

Figure 1: Watch Components and Button Functions
- LIGHT Button: Activates the luminous backlight for visibility in low-light conditions.
- MODE Button: Cycles through different functional modes: Time Display, Alarm Setting, Stopwatch, and Calendar.
- START/STOP Button: Used to start and stop the stopwatch function. Also used for adjusting values during setting modes.
- RESET Button: Used to reset the stopwatch. Also used for selecting items or confirming settings in various modes.
- Pointer Adjustment (Crown): Used to set the analog time. Pull out to adjust, push in to lock.
3. Setup and Operation
3.1 Initial Setup
- Wearing the Watch: Adjust the TPU strap to fit comfortably on your wrist. Secure it using the needle buckle.
- Analog Time Setting:
- Pull out the crown (Pointer Adjustment button) located on the right side of the watch.
- Rotate the crown to move the analog hands to the correct time.
- Once set, push the crown back in to secure the time and maintain water resistance.
3.2 Digital Time and Date Setting
- Press the MODE button repeatedly until the digital display shows the time and you are in the time setting mode (often indicated by flashing digits).
- Use the RESET button to select the digit you wish to adjust (e.g., seconds, minutes, hours, month, date, day of the week).
- Use the START/STOP button to increase the selected value. Hold it down for faster adjustment.
- Continue pressing RESET to move to the next setting (e.g., 12/24 hour format, year, month, date, day of the week). Adjust each with the START/STOP button.
- Once all settings are correct, press the MODE button to exit the setting mode.
3.3 Using the Stopwatch Function
- Press the MODE button until the digital display shows the stopwatch (usually '00:00:00').
- Press the START/STOP button to begin timing.
- Press the START/STOP button again to pause timing.
- Press the RESET button to clear the stopwatch to zero.
- Press the MODE button to exit the stopwatch mode.
3.4 Setting the Alarm
- Press the MODE button until the digital display shows the alarm setting (usually 'ALM' or 'AL').
- Use the RESET button to select the hour or minute digit you wish to adjust.
- Use the START/STOP button to adjust the selected value.
- Once the alarm time is set, press the MODE button to exit.
- To activate/deactivate the alarm, typically a combination of RESET and START/STOP or a dedicated button press in alarm mode is used. Refer to the on-screen indicators for alarm status.
3.5 Luminous Display (Backlight)
Press the LIGHT button (top left) to illuminate the digital display for a few seconds, allowing you to read the time in the dark.

Figure 2: Luminous Display in action
4. Maintenance
4.1 Water Resistance

Figure 3: Watch demonstrating 50m water resistance
Your SMAEL Tactical Watch Model 8079 is rated for 50 meters (5ATM) water resistance. This means it is suitable for:
- Daily use
- Hand washing
- Face washing
- Getting wet in the rain
Important Precautions:
- DO NOT operate any buttons while the watch is submerged in water.
- NOT suitable for swimming, diving, snorkeling, or any water sports involving high-velocity water.
- Avoid exposing the watch to hot water, steam, or extreme temperature changes (e.g., hot showers, saunas), as this can compromise the watch's seals.
- Always ensure the crown is fully pushed in after setting the analog time to maintain water resistance.
4.2 Cleaning
To clean your watch, wipe it gently with a soft, dry, lint-free cloth. For stubborn dirt on the case or strap, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish and components.
4.3 Battery Replacement
When the digital display becomes dim, the backlight weakens, or the watch functions become erratic, it may indicate a low battery. Battery replacement should ideally be performed by a qualified watch technician to ensure the watch's water resistance is maintained and to prevent damage to the internal movement.
5. Troubleshooting
- Digital Display is Blank or Dim:
- Check if the battery is low. Consider professional battery replacement.
- Ensure the LIGHT button is not stuck in the 'on' position, which can drain the battery.
- Time is Inaccurate:
- Reset both analog and digital times as per the instructions in Section 3.
- If the issue persists, the battery may be weak, or the movement may require servicing.
- Buttons are Unresponsive:
- Ensure no debris is lodged around the buttons.
- Do not force the buttons. If they remain unresponsive, seek professional assistance.
- Condensation or Water Inside the Watch:
- This indicates a breach in the watch's water resistance. Immediately take the watch to a professional watch repair service to prevent further damage to the movement.
6. Specifications

Figure 4: Watch Details and Dimensions
| Feature | Specification |
|---|---|
| Brand | SMAEL |
| Model | 8079 |
| Display Type | Pointer + Digital (Dual Display) |
| Water Resistance Depth | 50m (5ATM) |
| Case Material | ABS Plastic |
| Watch Strap Material | TPU (Silicone) |
| Watch Buckle Type | Needle Buckle (Buckle) |
| Mirror Material | Organic Glass (Acrylic) |
| Movement Type | Japanese Quartz + Electronic (Digital) |
| Dial Diameter | 58mm |
| Case Thickness | 20mm |
| Band Width | 22mm |
| Band Length | 260mm (Total) |
| Wearing Range | 140mm-230mm |
| Net Weight | 80g |
| Features | Two Location Time, Stopwatch, Week Display, Alarm, Calendar, Night Light, 50m Waterproof, 12/24 Hour System, Luminous, Shockproof, Fall Proof |
7. User Tips
- Protect from Extreme Conditions: To prolong the life of your watch, avoid exposing it to extreme temperatures (hot or cold) or strong magnetic fields, which can affect timekeeping accuracy.
- Secure the Crown: Always ensure the analog time setting crown is pushed in completely after adjustment. This is crucial for maintaining the watch's water resistance.
- Regular Cleaning: A quick wipe with a soft cloth after daily use can prevent dirt buildup and keep your watch looking new.
8. Warranty and Support
For warranty information, service, or support inquiries, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.