SMAEL 8087

Contents

SMAEL 8087 Multifunctional Sports Watch User Manual

Model: 8087

Introduction

This manual provides detailed instructions for the operation and maintenance of your SMAEL 8087 Multifunctional Sports Watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.

SMAEL 8087 Black Gold Watch front view

Figure 1: SMAEL 8087 Watch (Black Gold variant)

Specifications

The SMAEL 8087 is a robust multifunctional sports watch designed for durability and versatility. Key specifications are detailed below:

FeatureSpecification
BrandSMAEL
Model8087
Display TypeAnalog-Digital (Pointer + Number)
Movement TypeQuartz + Electronics (Japanese Movement)
Water Resistance Depth5 Bar (50 meters)
Case MaterialAlloy
Band Material TypeSilicone (TPU)
Clasp TypeBuckle (Needle Buckle)
Mirror MaterialOrganic Glass
Dial Diameter50mm
Case Thickness18mm
Band Width22mm
Net Weight66g
FeaturesTwo Location Time, Stopwatch, Week Display, Alarm, Calendar Display, Night Light Display, 12/24 Hour System, Shockproof and Fall Resistant
Product parameters diagram for SMAEL 8087 watch

Figure 2: Detailed product parameters and features.

Initial Setup

Before using your watch, it is recommended to set the current time and date. The watch features four buttons: LIGHT, MODE, RESET, and START.

SMAEL 8087 watch with buttons labeled Light, Mode, Start, Reset

Figure 3: Watch with button labels.

Setting Digital Time and Date:

  1. Press the MODE button repeatedly until the digital time display starts flashing (usually in Time Setting Mode).
  2. Use the RESET button to cycle through the settings (seconds, hour, minute, month, date, day of week).
  3. Use the START button to adjust the selected value.
  4. Once all settings are correct, press the MODE button again to exit the setting mode.

Setting Analog Time:

The analog hands are typically synchronized with the digital time or set independently. If your watch has a crown (not visible in images, but common for analog-digital), pull it out and turn to set the analog time, then push it back in. If no crown, the analog time is usually set digitally or automatically synchronizes.

Operating Instructions

Your SMAEL 8087 watch offers several functions accessible via the side buttons:

  • LIGHT Button: Press this button to activate the night light display (backlight) for a few seconds, illuminating the digital display for visibility in low-light conditions.
  • MODE Button: This button cycles through the different operational modes of the watch:
    • Time Display Mode (default)
    • Alarm Setting Mode
    • Stopwatch Mode
    • Dual Time Mode (if applicable)
  • START Button:
    • In Stopwatch Mode: Press to start and stop the stopwatch.
    • In Stopwatch Mode: Press and hold to reset the stopwatch to zero.
    • In Setting Modes: Used to increment or change the flashing value.
  • RESET Button:
    • In Stopwatch Mode: Press to split time or reset after stopping.
    • In Setting Modes: Used to select the next setting parameter.

Using the Stopwatch:

  1. Press MODE until you reach the Stopwatch Mode (usually indicated by "ST" or "CHRONO").
  2. Press START to begin timing.
  3. Press START again to pause/stop timing.
  4. Press RESET to clear the stopwatch to zero.
  5. To record lap/split times, press RESET while the stopwatch is running. The display will show the lap time while the stopwatch continues to run in the background. Press RESET again to return to the running stopwatch display.

Setting the Alarm:

  1. Press MODE until you reach the Alarm Setting Mode (usually indicated by "ALM").
  2. Use RESET to select the hour or minute digit you wish to set.
  3. Use START to adjust the selected hour or minute.
  4. Press MODE to confirm and exit.
  5. To turn the alarm ON/OFF, in Alarm Mode, press START to toggle the alarm symbol (bell icon) on or off.

12/24 Hour System:

In the regular Time Display Mode, press the START button to toggle between 12-hour (with AM/PM indicator) and 24-hour formats.

SMAEL 8087 watch on a wrist, showing time display

Figure 4: SMAEL 8087 watch worn on a wrist.

Maintenance

Proper care will ensure the longevity and performance of your SMAEL 8087 watch.

  • Water Resistance (50m): This watch is designed to withstand splashes, rain, and brief immersion in water. It is suitable for showering or swimming in shallow water. However, it is NOT suitable for hot water activities (e.g., hot showers, saunas) or diving. Do not operate buttons underwater.
  • Cleaning: Wipe the watch case and band regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying.
  • Battery: The watch uses a combination of Quartz and Electronic movements, likely requiring two types of batteries. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have batteries replaced by a qualified watch technician to ensure water resistance is maintained.
  • Storage: Store your watch in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields.
  • Avoid Chemicals: Keep the watch away from solvents, detergents, perfumes, and cosmetics, as these can damage the case, band, or seals.

Troubleshooting

If you encounter issues with your watch, please refer to the following common problems and solutions:

ProblemPossible Solution
Digital display is blank or dim.The battery may be low or depleted. Replace the battery.
Analog hands are not moving or incorrect.Check if the analog time needs to be set manually (if applicable) or if the battery for the analog movement is low.
Buttons are unresponsive.Ensure the watch is not in a locked mode (if applicable). Try pressing all buttons firmly. If still unresponsive, a battery issue or internal fault may be present.
Time or date is incorrect after setting.Re-enter the time setting mode and carefully follow the steps. Ensure you exit the setting mode correctly to save changes. A low battery can also cause timekeeping inaccuracies.
Water appears inside the watch.Immediately stop using the watch and seek professional service. This indicates a breach in water resistance, possibly due to damage or improper sealing after a battery change. Avoid hot water exposure.

If problems persist after attempting these solutions, please contact customer support for further assistance.

User Tips

  • Maximize Backlight Life: Use the night light display sparingly as frequent use can drain the battery faster.
  • Understand Water Resistance: While 50m water resistant, avoid pressing buttons underwater or exposing the watch to hot water/steam to prevent seal damage.
  • Regular Cleaning: A quick wipe down after sports or heavy use can prevent sweat and dirt buildup, keeping the watch looking new and preventing skin irritation.
  • Dual Time Zone: Utilize the two-location time feature when traveling or communicating with people in different time zones for convenience.
Multiple color variants of SMAEL 8087 watches

Figure 5: Available color options for the SMAEL 8087 watch.

Warranty and Support

For any warranty claims, technical support, or service inquiries, please contact the seller or the official SMAEL customer service. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.