1. Product Overview
The SMAEL 8060 is a robust and stylish multi-functional watch designed for outdoor enthusiasts. It features a dual display (analog and digital), offering versatility and a range of functions including stopwatch, alarm, calendar, and backlight. Built with an alloy case and a durable TPU strap, it is designed to withstand various conditions with 50-meter water resistance and shockproof capabilities.
Figure 1: SMAEL 8060 Sport Watch - Front View
Key Features:
- Dual Time Display (Analog & Digital)
- Stopwatch Function
- Alarm Function
- Date and Week Display
- Cold Light (LED) Backlight
- 50M Water Resistance
- Shockproof Design
- 12/24 Hour System
2. Watch Components and Buttons
Familiarize yourself with the watch's buttons and their primary functions:
Figure 2: Watch Button Identification
- Top Left Button (Mode/Light): Activates backlight (Luminous Buttons) and cycles through modes (Alarm Clock Mode).
- Bottom Left Button (Switcher): Switches between display modes (Nowtime, Stopwatch, Alarm, Dual Time, Date).
- Top Right Button (Start/Stop): Starts and stops the stopwatch, or confirms settings.
- Bottom Right Button (Adjust): Used for adjusting values in setting modes (Adjust Button) and potentially for setting analog hands (Hour Hand Button).
3. Setup and Basic Operation
3.1 Initial Time and Date Setting (Digital Display)
- In normal time display mode, press the Bottom Left Button (Switcher) repeatedly until you reach the time setting mode (usually indicated by flashing digits).
- Press the Bottom Right Button (Adjust) to select the digit you wish to adjust (e.g., seconds, hours, minutes).
- Use the Top Right Button (Start/Stop) to increase the selected value.
- Continue pressing the Bottom Right Button (Adjust) to move to the next setting (e.g., month, day, year, 12/24 hour format).
- Once all settings are correct, press the Bottom Left Button (Switcher) to exit the setting mode.
3.2 Setting Analog Hands
For watches with a crown, analog hands are typically set by pulling out the crown and rotating it. However, for this model, the 'Hour Hand Button' is indicated as the Bottom Right Button. If the analog hands do not automatically synchronize with the digital time, or if there is no crown, follow these steps:
- Enter a specific analog setting mode (if available, usually by holding the Bottom Left Button (Switcher) or Bottom Right Button (Adjust)).
- Use the Bottom Right Button (Adjust) to move the hour hand and the Top Right Button (Start/Stop) to move the minute hand.
- Exit the setting mode once the analog time is correct.
Note: Specific button combinations for analog hand adjustment may vary. If the analog hands do not move with the digital setting, consult the manufacturer's detailed instructions or support.
3.3 Using the Backlight
Press the Top Left Button (Mode/Light) to illuminate the digital display for easy reading in low-light conditions.
Figure 3: LED Backlight in action
4. Operating Functions
4.1 Stopwatch Function
- From normal time display, press the Bottom Left Button (Switcher) until the stopwatch mode is displayed (usually '00:00:00').
- Press the Top Right Button (Start/Stop) to start the stopwatch.
- Press the Top Right Button (Start/Stop) again to pause/resume.
- To reset the stopwatch, press the Bottom Right Button (Adjust) while the stopwatch is paused.
- Press the Bottom Left Button (Switcher) to return to normal time display.
4.2 Alarm Setting
- From normal time display, press the Bottom Left Button (Switcher) until the alarm mode is displayed (e.g., 'AL' or '00:00').
- Press the Bottom Right Button (Adjust) to select the hour or minute digits.
- Use the Top Right Button (Start/Stop) to set the desired alarm time.
- Press the Bottom Left Button (Switcher) to activate/deactivate the alarm or to exit the setting mode.
4.3 Dual Time Display
The watch supports displaying two different time zones. To set the second time zone:
- Press the Bottom Left Button (Switcher) until you reach the Dual Time mode.
- Hold the Bottom Right Button (Adjust) to enter setting mode for the second time zone.
- Use the Top Right Button (Start/Stop) to adjust the hours and minutes.
- Press the Bottom Right Button (Adjust) to cycle through settings.
- Press the Bottom Left Button (Switcher) to exit.
5. Maintenance and Care
5.1 Water Resistance
The SMAEL 8060 watch is rated for 50 meters (5 ATM) water resistance. This means it is suitable for everyday use, including splashes, rain, and short periods of recreational swimming. It is NOT suitable for diving, snorkeling, or high-pressure water activities.
Figure 4: 50M Water Resistance
- Do not operate buttons underwater.
- Avoid exposing the watch to hot water or steam, as this can compromise the seals.
- If the watch is exposed to saltwater, rinse it with fresh water and dry thoroughly.
5.2 Cleaning
To maintain the appearance and longevity of your watch:
- Wipe the watch case and strap regularly with a soft, damp cloth.
- For stubborn dirt, use a mild soap solution and rinse thoroughly.
- Avoid using harsh chemicals or abrasive materials, which can damage the watch's finish.
5.3 Battery Replacement
The watch uses a standard watch battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a professional watch technician to ensure proper sealing and water resistance are maintained.
6. Troubleshooting
- Digital Display is Blank/Dim: The battery may be low or depleted. Replace the battery.
- Buttons Not Responding: Ensure the watch is not in a locked mode (if applicable). If the issue persists, a battery replacement or professional inspection may be needed.
- Time is Incorrect: Re-set the time and date following the instructions in Section 3.1. Check if the 12/24 hour format is correctly set.
- Water Inside the Watch: Immediately take the watch to a professional for inspection and repair to prevent further damage.
7. Specifications
Figure 5: Detailed Watch Parameters
| Feature | Specification |
|---|---|
| Brand | SMAEL |
| Model Number | 8060 |
| Display Type | Pointer + Digital (Dual Display) |
| Water Resistance Depth | 5Bar (50 meters) |
| Case Material | Alloy |
| Band Material Type | Silicone (TPU) |
| Clasp Type | Buckle (Needle Buckle) |
| Mirror Material | Organic Glass (Plexiglass) |
| Movement Type | Quartz + Digital (Japanese Movement) |
| Dial Diameter | 53mm |
| Case Thickness | 18mm |
| Band Width | 22mm |
| Band Length | 22 inch (approx. 254mm total watch chief) |
| Wearing Range | 140mm - 230mm |
| Net Weight | 82g |
8. Warranty and Support
For any issues or inquiries regarding your SMAEL 8060 watch, please contact the seller or refer to the official SMAEL website for support. Keep your purchase receipt as proof of purchase for any warranty claims.
9. User Tips
- Read the Manual: Always refer to this manual for detailed instructions on setting specific functions, especially for initial setup.
- Water Resistance Check: While rated for 50M, it's always a good practice to avoid unnecessary water exposure and never operate buttons underwater.
- Regular Cleaning: A quick wipe-down after outdoor activities can prevent dirt buildup and keep your watch looking new.
- Battery Life: If the digital display starts to fade or functions become unreliable, consider replacing the battery promptly to ensure continuous operation.