SMAEL 8085

Contents

SMAEL 8085 Sports Electronic Watch User Manual

Model: 8085

Thank you for choosing the SMAEL 8085 Sports Electronic Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read it carefully to ensure proper use and to enjoy all the features of your new timepiece.

1. Product Overview

The SMAEL 8085 is a robust and multifunctional electronic watch designed for outdoor and sports enthusiasts. It features a dual display (pointer + digital), 50-meter water resistance, night light, stopwatch, alarm, and calendar functions, all housed in a durable ABS case with a comfortable TPU strap.

Front view of SMAEL 8085 watch showing digital and analog displays and button labels.
Figure 1: Front view of the SMAEL 8085 watch with labeled buttons.

Button Functions:

  • LIGHT: Activates the night light display.
  • MODE: Cycles through different modes (Time, Alarm, Stopwatch, Date).
  • RESET: Used for resetting values or confirming settings in various modes.
  • START: Used for starting/stopping stopwatch, adjusting values, or advancing through settings.

2. Specifications

FeatureDescription
BrandSMAEL
Model8085
Display TypePointer + Digital
Water Resistance50m (5Bar)
Case MaterialABS Plastic
Strap MaterialTPU Silicone
Clasp TypeNeedle Buckle
Mirror MaterialOrganic Glass (High Definition Anti-Scratch)
Movement TypeJapanese Movement (Quartz + Electronics)
Dial Diameter55mm
Case Thickness18mm
Band Width22mm
Total Length of Watch260mm
Net Weight59g
FunctionsDual Time, Stopwatch, Week Display, Alarm, Calendar, Night Light, 12/24 Hour System
Diagram showing watch dimensions: case diameter 49mm, case width 55mm, dial thickness 18mm, band width 22mm, total length 260mm, wearing range 140-230mm.
Figure 2: Watch dimensions and key parameters.

3. Setup Instructions

3.1 Setting Digital Time and Date (12/24 Hour System)

  1. In normal time display mode, press the MODE button repeatedly until the seconds start flashing. This indicates you are in setting mode.
  2. Press the START button to cycle through the setting items: Seconds → Hour → Minute → Month → Date → Day of Week.
  3. Use the RESET button to adjust the flashing value. Hold RESET to change values faster.
  4. To switch between 12-hour and 24-hour format, adjust the hour setting. The 'A' or 'P' indicator will show for 12-hour format.
  5. Once all settings are correct, press the MODE button to exit setting mode.

3.2 Setting Analog Time

The analog hands are typically set independently. Locate the crown (small knob) on the side of the watch case. Pull it out gently and rotate it to adjust the analog hands to match the digital time. Push the crown back in to secure the setting.

3.3 Setting the Alarm

  1. From normal time display, press the MODE button once to enter Alarm mode (usually indicated by 'ALM' on the digital display).
  2. Press the RESET button to select the hour or minute to set. The selected value will flash.
  3. Use the START button to adjust the flashing hour or minute.
  4. Press MODE to confirm and exit Alarm setting mode.
  5. To turn the alarm ON/OFF, in Alarm mode, press the START button. An alarm icon will appear/disappear to indicate its status.

4. Operating Instructions

4.1 Using the Stopwatch

  1. From normal time display, press the MODE button twice to enter Stopwatch mode (usually indicated by 'ST' or 'STOP' on the digital display).
  2. Press the START button to begin timing.
  3. Press the START button again to pause timing.
  4. Press the RESET button to reset the stopwatch to zero.
  5. To resume timing after pausing, press START.
  6. Press MODE to exit Stopwatch mode.

4.2 Activating the Night Light

Press the LIGHT button (typically on the top-left side of the watch) to illuminate the digital display. The night light provides clear visibility in low-light conditions.

Watch face with night light activated, showing illuminated digital display.
Figure 3: Night Light Display for enhanced visibility.

4.3 Dual Time Display

The watch supports displaying two different time zones. While the primary digital time is set as described in Section 3.1, the analog hands can be set to a different time zone if desired, providing a quick reference for a second location.

5. Maintenance and Care

5.1 Water Resistance (50m)

Your SMAEL 8085 watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for daily use, showering, and swimming in shallow water. However, it is NOT suitable for diving, snorkeling, or high-pressure water activities. Do NOT operate buttons underwater, as this can compromise the water seal.

Watch submerged in water, illustrating 50-meter water resistance.
Figure 4: The watch is designed for 50-meter water resistance.

5.2 Cleaning

Wipe the watch regularly with a soft, dry cloth to remove dirt and sweat. For stubborn grime, use a slightly damp cloth and mild soap, then rinse thoroughly with clean water (if water exposure is safe) and dry immediately. Avoid harsh chemicals or abrasive materials.

5.3 Battery Replacement

When the display becomes dim or functions become erratic, it may be time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.

5.4 Durability Features

  • High Definition Anti-Scratch Organic Glass: The watch face is designed to resist scratches and maintain clarity.
  • Close-up of watch face highlighting the anti-scratch organic glass.
    Figure 5: High Definition Anti-Scratch Mirror Surface.
  • Anti-Drop Structure: The watch features a three-dimensional seismic resistant structure to effectively alleviate the impact of falls.
  • Watch in a rugged environment, illustrating its anti-drop structure.
    Figure 6: Anti-Drop Structure for enhanced durability.
  • Anti-Slip Buttons: Buttons are designed for easy and convenient operation, even with wet hands.
  • Side view of the watch showing the anti-slip buttons.
    Figure 7: Anti-Slip Buttons for easy operation.
  • Stainless Steel Back & TPU Strap: The rigorous waterproof structure includes a stainless steel back cover and a soft, skin-friendly, and resilient TPU strap with a porous design for comfortable wearing.
  • Back of the watch showing stainless steel cover and details of the TPU strap.
    Figure 8: Stainless Steel Back and TPU Strap details.

6. Troubleshooting

  • Digital Display is Dim or Blank: The battery may be low or depleted. Replace the battery.
  • Buttons are Unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a stated feature for this model). If wet, dry thoroughly. If issues persist, a reset may be needed (consult a technician).
  • Time is Inaccurate: Re-set the digital and analog time as per Section 3.1 and 3.2. If the issue continues, the battery may be low or the movement may require servicing.
  • Water inside the Watch: Immediately stop using the watch and take it to a qualified technician. Water ingress can cause severe damage.

7. User Tips

  • For optimal battery life, avoid excessive use of the night light function.
  • Regularly check that the crown is fully pushed in to maintain water resistance.
  • When traveling, utilize the dual time display feature to keep track of both home and local time.
  • The TPU strap is designed for comfort and durability; clean it regularly to prevent skin irritation from accumulated sweat and dirt.

8. Warranty and Support

For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.