1. Introduction
This manual provides detailed instructions for the SMAEL 8072 Dual Display Quartz Electronic Watch. Designed for outdoor and tactical use, this military-style watch features both analog and digital time displays, along with various functions to support your daily activities and adventures. Please read this manual carefully to ensure proper use and maintenance of your watch.
2. Key Features
- Dual Time Display (Analog and Digital)
- 50M Water Resistance
- Luminous Display for Night Visibility
- Stopwatch Function
- Alarm Function
- Calendar Display (Day of the week, Date)
- 12/24 Hour System
- Durable Alloy Case and TPU Strap
- Scratch-Resistant Organic Glass Mirror
3. Specifications
Figure 1: Watch Parameters and Dimensions
| Attribute | Value |
|---|---|
| Brand Name | SMAEL |
| Model Number | 8072 |
| Display Type | Digital |
| Movement | Digital |
| Case Material | Alloy |
| Case Shape | Round |
| Dial Diameter | 49mm |
| Case Thickness | 22mm |
| Band Material Type | TPU (Silicone) |
| Band Width | 23mm |
| Band Length | 23cm (Total strap length 250mm) |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50M) |
| Mirror Material | Organic Glass |
| Weight | 74g |
| Wearing Range | 140mm-230mm |
| Battery Included | Yes |
4. Initial Setup
Before using your watch, you may need to set the time and date. The SMAEL 8072 features both analog and digital displays. The analog hands are typically set using the crown, while digital settings are adjusted via the side buttons.
Figure 2: Watch Details and Anti-Skid Key
4.1 Setting Analog Time
- Pull out the crown (Anti Skid Key) on the right side of the watch.
- Rotate the crown to adjust the hour and minute hands to the desired time.
- Push the crown back in to secure the time setting.
4.2 Setting Digital Time and Date
Figure 3: Function Analysis and Button Layout
Refer to Figure 3 for button identification:
- LIGHT: Activates the backlight.
- MODE: Cycles through different digital modes (Time, Alarm, Stopwatch, Calendar).
- START/STOP: Used for starting/stopping functions like the stopwatch, or adjusting values.
- RESET: Used for resetting functions or confirming settings.
- Press the MODE button repeatedly until the digital display shows the Time setting mode (usually indicated by flashing digits).
- Use the START/STOP button to adjust the flashing value (e.g., hours, minutes, seconds).
- Press the RESET button to move to the next setting item (e.g., from hours to minutes, then to date).
- Repeat steps 2 and 3 until all desired time and date settings are configured.
- Press the MODE button to exit the setting mode and return to the normal time display.
5. Operating Instructions
5.1 Using the Backlight (Luminous Display)
Figure 4: Luminous Display in Low Light
To illuminate the digital display in low-light conditions, press the LIGHT button on the upper left side of the watch. The backlight will activate for a few seconds.
5.2 Stopwatch Function
- Press the MODE button until the digital display shows the Stopwatch mode (usually '00:00:00').
- Press the START/STOP button to begin timing.
- Press the START/STOP button again to pause timing.
- To resume, press START/STOP. To reset, press the RESET button while the stopwatch is paused.
- Press the MODE button to exit Stopwatch mode.
5.3 Alarm Function
Figure 5: Alarm Mode Display
- Press the MODE button until the digital display shows the Alarm mode (usually indicated by 'AL' or a bell icon).
- Press the RESET button to select the hour or minute setting.
- Use the START/STOP button to adjust the flashing hour or minute.
- Once the desired alarm time is set, press MODE to activate/deactivate the alarm or exit the setting mode.
- When the alarm sounds, press any button to stop it.
5.4 Calendar Display
The watch automatically displays the day of the week and date in Calendar mode. Press the MODE button to cycle through functions until the calendar is displayed.
6. Care and Maintenance
6.1 Water Resistance (50M)
Figure 6: 50M Water Resistance Guidelines
Your SMAEL 8072 watch is water-resistant up to 50 meters (5ATM). This means it is suitable for daily use, including washing hands, washing your face, getting wet in the rain, and swimming. However, it is NOT suitable for hot water activities, diving, or prolonged underwater exposure. Do not operate buttons while the watch is submerged in water.
6.2 Cleaning
- Case and Mirror: Wipe the watch case and organic glass mirror with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
- Strap: The TPU strap is soft and skin-friendly. Clean it with mild soap and water, then rinse and dry completely. Avoid harsh chemicals that may damage the material.
6.3 General Care
- Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
- Keep the watch away from strong magnetic fields, as this can affect the accuracy of the movement.
- Avoid strong impacts or drops. The watch features shockproof and fall-proof cushioning technology, but excessive force can still cause damage.
- Ensure the crown is pushed in completely after setting the time to maintain water resistance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Digital display is blank or dim. | Low battery. | Replace the battery. Consult a professional if unsure. |
| Analog hands are not moving. | Crown is pulled out; battery issue. | Push the crown back in. If still not working, check battery. |
| Digital time is incorrect. | Time not set correctly. | Follow instructions in Section 4.2 to reset the digital time. |
| Watch fogs up internally. | Temperature change; water ingress. | If minor, it may clear. If persistent or severe, seek professional repair immediately to prevent damage. |
| Buttons are unresponsive. | Stuck button; low battery. | Ensure buttons are not jammed. Check battery. |
8. User Tips
- Regular Checks: Periodically check that the crown is fully pushed in to maintain water resistance.
- Battery Life: If the digital display starts to dim or the backlight becomes weak, it's a good indicator that the battery may need replacement soon.
- Strap Comfort: The TPU strap is designed for comfort. If you experience any irritation, ensure the strap is clean and not too tight.
- Dual Time Zones: Utilize the dual display feature to keep track of two different time zones, which is particularly useful for travelers or those communicating across regions.
9. Warranty and Support
For any issues not covered in this manual, or for warranty claims, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase.