Product Overview
The ENCHEN POP Clean Automatic Foaming Hand Washer is a non-contact soap dispenser designed for hygienic hand washing. It features infrared induction for rapid foam dispensing and adjustable foam volume, making it suitable for various environments including smart homes, hospitals, and schools.
Setup and Installation
- Insert Batteries: The dispenser requires 3 AA alkaline batteries (not included). Open the battery compartment, insert the batteries according to the polarity markings, and close the compartment securely.
Figure 3: Battery installation and liquid refill points. - Fill with Liquid Soap: Unscrew the liquid container from the base of the dispenser. Pour suitable liquid soap into the container. The dispenser is compatible with various liquid soaps, facial cleansers, and shower gels.
Figure 4: Filling the liquid soap container. - Reassemble: Screw the liquid container back onto the dispenser base firmly.
- Placement: Place the dispenser on a flat, stable surface in your desired location (bathroom, kitchen, etc.). The compact design allows for installation-free use.
Note: Liquid soap and batteries are not included with the product due to shipping regulations.
Operating Instructions
- Power On: The device typically powers on automatically once batteries are inserted.
- Dispensing Foam: Place your hand under the arc nozzle. The infrared sensor will detect your hand, and the dispenser will automatically release a rich, micron-sized foam within 0.25 seconds.
Figure 5: Automatic foam dispensing. - Adjusting Foam Volume (Two-Stage Foaming): The dispenser features a two-stage foam output. A white light indicator signifies "multi-mode" (more foam), while a blue light indicates "few modes" (less foam). Tap the power button on top to switch between these modes to suit your preference and avoid waste.
Figure 6: White light for multi-mode, blue light for few modes (adjustable foam volume). - Hand Washing Procedure: For effective hand hygiene, follow these steps after dispensing foam:
Figure 7: Recommended hand washing procedure. - Palm rubbing
- Palm rubbing back of hand
- Cross rubbing of ten fingers
- Rub the fingertips
- Turn the thumb
- Rubbing hands together
Maintenance
- Cleaning the Exterior: The dispenser has an IPX4 waterproof rating, allowing for easy cleaning of the exterior. Wipe the surface with a damp cloth. Do not submerge the unit in water.
- Refilling Liquid: When the liquid level is low, refill the container as described in the "Setup and Installation" section.
- Battery Replacement: Replace the 3 AA alkaline batteries when the dispenser's performance diminishes or it stops dispensing foam.
- Nozzle Cleaning: If the nozzle becomes clogged, gently wipe it with a damp cloth. Do not use sharp objects to clear the nozzle.
Troubleshooting
- No Foam Dispensed:
- Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure there is enough liquid soap in the container.
- Verify that your hand is placed within the induction distance (<45mm) of the sensor.
- Foam is Not Rich/Bubbly Enough:
- The foaming quality can vary depending on the type of liquid soap used. Not all washing liquids will foam optimally with this machine. Consider trying a different brand of foaming hand soap or dilute your current liquid soap according to its instructions for foaming dispensers.
- Ensure the liquid soap is diluted correctly if it's a concentrate.
- Dispenser Leaks:
- Ensure the liquid container is screwed on tightly to the dispenser base.
- Check for any cracks or damage to the liquid container.
Specifications
| Feature | Specification |
|---|---|
| Brand | Enchen |
| Product Model | POP Clean |
| Product Dimensions | 190 x 79 x 79 mm |
| Rated Capacity | 280 ML |
| Power Supply | 3 AA Alkaline Batteries (Not Included) |
| Waterproof Rating | IPX4 |
| Rated Voltage | 4.5V |
| Rated Power | 1.5W |
| Induction Distance | <45mm |
| Material | Environmental protection material |
| Features | Automatic infrared induction, Two-stage foaming, Low power consumption, Quieter operation |
User Tips
- Soap Compatibility: While the dispenser works with various liquid soaps, some may foam better than others. If you experience poor foam quality, try a different brand of foaming hand soap or dilute your current liquid soap according to its instructions for foaming dispensers.
- Battery Life: For optimal performance, use high-quality alkaline batteries. Replace all three batteries at once when needed.
- Conserve Soap: Utilize the two-stage foaming feature (white light for more foam, blue light for less) to dispense only the amount of soap you need, helping to conserve liquid.
- Placement: Ensure the dispenser is placed in an area where the sensor is not obstructed and there is enough space for hand placement.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.
