LIKIMIO Bed Frame with LED Lights

Contents

LIKIMIO Bed Frame with LED Lights User Manual

Model: Bed Frame with LED Lights

Introduction

This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your LIKIMIO Bed Frame with LED Lights. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

Overall view of the LIKIMIO bed frame with LED headboard in a bedroom setting.

Figure 1: LIKIMIO Bed Frame with LED Lights

Safety Information

Please observe the following safety precautions:

  • Ensure all components are securely fastened before use.
  • Do not exceed the maximum weight capacity of 880 lbs.
  • Keep electrical components (LED lights, power adapter) away from water.
  • Use only the provided 12V fireproof power adapter.
  • Children should not play on or around the bed frame unsupervised.

Setup and Assembly

The LIKIMIO Bed Frame is designed for easy assembly, typically taking about 40 minutes for one adult. No additional tools are required beyond what is provided.

Package Contents:

Verify that all parts are present and undamaged before beginning assembly. All parts are clearly labeled.

  • Headboard with integrated LED lights
  • Side rails (left and right)
  • Footboard
  • Center support beam with 3 metal legs
  • 12 thickened wooden slats with Velcro attachments
  • Assembly hardware (screws, bolts, etc.)
  • 12V fireproof power adapter
  • 24-key IR Remote Control for LED lights
  • Instruction manual (this document)

Assembly Steps:

  1. Unpack all components and lay them out on a clean, soft surface to prevent scratching.
  2. Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
  3. Install the center support beam and its three metal legs.
  4. Lay the 12 thickened wooden slats across the bed frame. The slats are designed with Velcro to secure them in place.
  5. Connect the 12V fireproof power adapter to the LED light strip on the headboard and plug it into a suitable power outlet.
  6. Ensure all connections are tight and the bed frame is stable before placing a mattress on it.

Operating Instructions

LED Headboard Lights:

Your LIKIMIO bed frame features RGB LED lights integrated into the headboard, controlled via a 24-key IR remote or a smart app.

Image showing the LED headboard with a 24-key IR remote control and icons indicating smart app control, RGB color adjust, music sync, and timing settings.

Figure 2: LED Light Control Options (Remote and App)

  • Power On/Off: Use the ON/OFF buttons on the remote or the app interface.
  • Color Adjustment: Select from a wide range of RGB colors using the remote or the color palette in the smart app.
  • Brightness Control: Adjust the light intensity to your preference.
  • Music Sync: The lights can synchronize with music, creating dynamic lighting effects. Refer to the smart app for specific settings.
  • Timing Settings: Set schedules for the lights to turn on or off automatically via the smart app.
  • Diffused Lighting: The LED strip is positioned behind an acrylic panel to provide soft, eye-friendly diffused light.
  • Detailed view of the LED light strip behind an acrylic panel, highlighting its diffused light.

    Figure 3: Diffused LED Lighting from Acrylic Panel

Adjustable Headboard Height:

The headboard can be adjusted to two different heights to accommodate mattresses between 8 and 12 inches thick.

  • Height Options: 43 inches or 47 inches.
  • Adjustment: To adjust the headboard height, loosen the bolts connecting the headboard to the side rails, raise or lower the headboard to the desired position, and re-tighten the bolts securely.

Care and Maintenance

Cleaning the Upholstery:

The bed frame is upholstered with waterproof PU leather, making it easy to clean.

Close-up of a hand wiping the waterproof PU leather surface of the bed frame.

Figure 4: Cleaning the Waterproof PU Leather

  • Wipe spills immediately with a soft, damp cloth.
  • For general cleaning, use a mild soap solution and a soft cloth. Avoid harsh chemicals or abrasive cleaners.
  • Ensure the surface is dry after cleaning.

General Maintenance:

  • Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary.
  • Inspect the wooden slats for any signs of damage or wear.
  • Keep the power adapter and wiring free from obstruction and damage.

Troubleshooting

ProblemPossible CauseSolution
LED lights not turning on.Power adapter unplugged or faulty; remote control battery dead; app not connected.Check power connection. Replace remote battery. Ensure app is correctly paired via Bluetooth/Wi-Fi.
Bed frame feels unstable or squeaks.Loose bolts or screws; uneven floor; damaged slats.Re-tighten all assembly hardware. Ensure the bed is on a level surface. Inspect and replace any damaged slats.
Headboard height cannot be adjusted.Bolts are too tight.Loosen the headboard connection bolts sufficiently before attempting to adjust height. Re-tighten after adjustment.

Specifications

FeatureDetail
BrandLIKIMIO
ModelBed Frame with LED Lights
Upholstery MaterialWaterproof PU Leather
Frame MaterialMetal, Wood Slats
Weight CapacityUp to 880 lbs
Headboard HeightAdjustable (43 inches or 47 inches)
Recommended Mattress Thickness8-12 inches
LED LightsRGB, Smart APP Control, 24-key IR Remote Control, Music Sync, Timing Settings
Power Adapter12V Fireproof, with overload/short-circuit protection
Assembly Time (Approx.)40 minutes (for one adult)
OriginMainland China
With StorageYes (Specific storage features not detailed in provided information)

Dimensions:

SizeOverall Dimensions (L x W x H)Bed Height
Twin76" x 40.2" x 42.9"-46.9" (194cm x 102cm x 109-119cm)12.2" (31cm)
FullApprox. 78.7" x 35.4" (200cm x 90cm) - Based on SKU data, actual dimensions may vary.Not specified
QueenApprox. 74.8" x 31.5" (190cm x 80cm) - Based on SKU data, actual dimensions may vary.Not specified
Diagram illustrating the dimensions of the Twin size bed frame.

Figure 5: Twin Size Bed Frame Dimensions

User Tips

Based on general user feedback for similar products:

  • When assembling, ensure all parts are correctly oriented before tightening screws to avoid misalignment.
  • For optimal LED light control, ensure the IR remote has a clear line of sight to the receiver, or use the smart app for more advanced features and convenience.
  • Consider placing felt pads under the bed legs if using on hardwood floors to prevent scratches and reduce noise.

Note: Specific user tips from reviews or Q&A were not available in the provided data.

Warranty and Support

For warranty information, product support, or to report any issues, please contact the seller directly. Keep your purchase receipt as proof of purchase.

Seller: IRONCK Furniture Store

Positive feedback: 91.5%

Store rating: 4.7

Communication rating: 4.6

Note: Specific warranty terms and conditions are not provided in this manual. Please refer to the seller's policies at the time of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.