Manuals+

Acceo K10

Acceo K10/K10P Solar Power Car TPMS User Manual

Digital LCD Display Car Security Alarm Tire Pressure Monitoring System with 4 Sensors

Model: K10 / K10P

Brand: Acceo

1. Introduction

The Acceo K10/K10P Solar Power Car TPMS (Tire Pressure Monitoring System) is designed to enhance driving safety by providing real-time monitoring of your vehicle's tire pressure and temperature. This system features a clear LCD digital display, solar and USB charging capabilities, and intelligent alarm functions for various tire abnormalities. It is suitable for a wide range of vehicles including cars, SUVs, MPVs, vans, and limousines.

Acceo K10 TPMS display unit and external sensors
Acceo K10 TPMS display unit with external sensors.
Various vehicle types suitable for Acceo TPMS
The Acceo TPMS is suitable for most types of vehicles.

2. Key Features

  • Dual Charging: Solar power and USB charging for continuous operation.
  • Clear Display: Colorful LCD digital screen for easy reading of tire data.
  • Real-time Monitoring: Continuously monitors pressure and temperature for all four tires.
  • Intelligent Alarms: Alerts for low air pressure, high temperature, tire leaks, and low battery.
  • Smart Shock Start: Automatically activates when the car is in motion.
  • Wireless Connection: Sensors connect wirelessly for easy installation.
  • Sensor Options: Available with external or built-in sensors to suit different preferences.
  • Unit Interchangeability: Supports both PSI and Bar pressure units, and Celsius for temperature.
  • Durability: Waterproof and dustproof design.
Acceo TPMS display on dashboard highlighting features
Visual representation of key features including solar charging, waterproof, and real-time monitoring.
Real-time tire monitoring and common tire issues
The system provides real-time monitoring to prevent issues like flat tires, leaks, and bulges.

3. Package Contents

3.1 K10 (External Sensor Model)

  • 1 x TPMS Monitor
  • 1 x USB Power Cable
  • 4 x External Sensors (RF, LF, LR, RR labeled)
  • 2 x Spare Batteries (CR1632)
  • 4 x Screw Nuts
  • 1 x Wrench
  • 1 x Fixed Sticker
  • 1 x User Manual
Package contents for K10 external sensor model
Contents of the K10 package with external sensors.

3.2 K10P (Built-in Sensor Model)

  • 1 x TPMS Monitor
  • 1 x USB Power Cable
  • 4 x Built-in Sensors
  • 1 x Fixed Sticker
  • 1 x User Manual
Package contents for K10P built-in sensor model
Contents of the K10P package with built-in sensors.

4. Installation

4.1 Monitor Setup

  1. Place the monitor on your dashboard in a position that does not obstruct your view.
  2. Ensure the solar panel on the monitor is exposed to sunlight for charging.
  3. For initial or faster charging, connect the monitor to a USB power source using the provided USB cable.
  4. The monitor will automatically power on when it detects vibration (smart shock start).
Acceo TPMS display unit showing solar and USB charging
The monitor supports both solar and USB charging.

4.2 External Sensor Installation (K10 Model)

External sensors are designed for easy, user-friendly installation.

  1. Identify each sensor by its label (RF: Right Front, LF: Left Front, LR: Left Rear, RR: Right Rear).
  2. Unscrew the original valve cap from the tire valve.
  3. Screw on the corresponding external sensor tightly onto the tire valve.
  4. Use the provided wrench to tighten the sensor for anti-theft and to ensure a secure seal.
External sensor installation on a tire valve
External sensor being installed on a tire valve.

4.3 Built-in Sensor Installation (K10P Model)

Built-in sensors require professional installation as they are mounted inside the tire. It is highly recommended to have this procedure performed by a qualified car service center.

  1. Take your vehicle and the built-in sensors to a professional car service center.
  2. The technician will remove the tires, mount the sensors inside the wheels, and rebalance the tires.
  3. Ensure each sensor is installed on its corresponding wheel position (RF, LF, LR, RR).
Internal sensor mounted inside a wheel
Internal sensor mounted inside a wheel.

5. Operation

5.1 Monitor Display and Buttons

Product display diagram with numbered parts and dimensions
Diagram of the TPMS monitor display and controls.
  1. Left Key: Used for navigation or decreasing values in settings.
  2. Set Key: Used to enter settings menu or confirm selections.
  3. Right Key: Used for navigation or increasing values in settings.
  4. Solar Energy Panel: Charges the monitor battery using sunlight.
  5. Temperature Unit: Displays the current temperature unit (e.g., °C).
  6. Tire Pressure Display: Shows the real-time pressure for each tire.
  7. Tire Pressure Unit: Displays the current pressure unit (e.g., Bar, PSI).
  8. Temperature Display: Shows the real-time temperature for each tire.
  9. Power Display: Indicates the monitor's battery level.
  10. USB Charging Port: For charging the monitor via USB cable.

    The monitor displays pressure and temperature for all four tires simultaneously. It also shows the monitor's battery status and the current time.

5.2 Alarms and Warnings

The system provides immediate alerts for critical tire conditions:

  • Low Air Pressure Alarm: Activates when tire pressure drops below the preset threshold.
  • High Temperature Alarm: Activates when tire temperature exceeds the preset threshold.
  • Tire Leak Alarm: Detects rapid pressure loss.
  • Low Battery Alarm: Alerts when sensor or monitor battery is low.
  • Buzzer Abnormal Alarm: An audible beep will sound to indicate any detected abnormality.
Buzzer abnormal alarm visualization
The system provides rapid induction abnormality detection with a beep early warning.

6. Maintenance

6.1 External Sensor Battery Replacement (K10 Model)

The external sensors use replaceable batteries with an approximate life of 2 years. Follow these steps to replace them:

  1. Remove the dismantling gasket from the sensor.
  2. Use the provided wrench to carefully open the sensor shell.
  3. Remove the old battery (CR1632).
  4. Replace with a new CR1632 battery, ensuring correct polarity.
  5. Close the sensor shell and re-attach the dismantling gasket.
Steps for external sensor battery replacement
Step-by-step guide for replacing the external sensor battery.

6.2 Internal Sensor Battery (K10P Model)

The built-in sensors have a battery life of approximately 5 years and are not designed to be user-replaceable. If a built-in sensor battery depletes, the entire sensor unit will need to be replaced by a professional.

7. Troubleshooting

Problem Possible Cause Solution
Monitor not turning on Low battery; no vibration detected. Charge the monitor via USB. Ensure the car is moving for smart shock start.
No tire data displayed Sensors not paired; sensor battery low/dead; sensor not installed correctly. Check sensor installation. Replace external sensor battery if needed. Refer to the full manual for pairing instructions.
Inaccurate readings Sensor malfunction; incorrect unit settings. Verify unit settings (PSI/Bar). If problem persists, contact support for sensor replacement.
Alarm sounds frequently Tire pressure/temperature outside safe limits; alarm thresholds set too sensitive. Check tire pressure and temperature manually. Adjust alarm thresholds in settings if necessary (refer to full manual).

8. Specifications

8.1 General Monitor Specifications

  • Voltage: 5V
  • Material: Plastic
  • Item Type: Alarm Systems & Security
  • Certifications: RoHS, FCC, CE, CCC
  • Dimensions (approx.): Length 75mm, Width 81mm, Height 26mm
  • Weight (approx.): 0.4 kg

8.2 External Sensor Specifications (K10 Model)

External sensor specifications diagram
Detailed specifications for the external sensor.
  • Working Voltage: 2.1-3.5V
  • Working Temperature: -20℃ to 80℃
  • Pressure Accuracy: ±2psi
  • Frequency: 433.92 MHz
  • Pressure Rate: 0~3.5 Bar / 0~50 psi
  • Temperature Accuracy: ±3℃
  • Battery Life: 2 Years (replaceable)
  • Protection: IP67 (Dust-proof / Waterproof)

8.3 Internal Sensor Specifications (K10P Model)

Internal sensor specifications diagram
Detailed specifications for the internal sensor.
  • Working Voltage: 2.1-3.5V
  • Working Temperature: -40℃ to 125℃
  • Pressure Accuracy: ±2psi
  • Frequency: 433.92 MHz
  • Pressure Rate: 0~3.5 Bar / 0~50 psi
  • Temperature Accuracy: ±3℃
  • Battery Life: 5 Years (not replaceable)
  • Protection: IP67 (Dust-proof / Waterproof)

9. User Tips

  • Check Pressure Limits: Always ensure your tire pressure falls within the specified operating range of the sensors (0-3.5 Bar or 0-50 PSI) to ensure accurate readings and prevent damage.
  • Regular Charging: Even with solar charging, occasionally connect the monitor via USB, especially during periods of low sunlight or extended indoor parking, to ensure optimal battery levels.
  • Sensor Placement: Double-check that external sensors are tightly screwed on and that internal sensors are professionally installed to prevent leaks and ensure accurate data transmission.
  • Monitor Visibility: Position the monitor where it is clearly visible without obstructing your driving view, allowing for quick glances at tire status.

10. Warranty and Support

This product typically comes with a 365-day free replacement warranty for manufacturing defects. For technical support, warranty claims, or further assistance, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase records for warranty validation.