1. Introduction
Thank you for choosing the DEKO Cordless Drill. This manual provides essential information for the safe and effective operation, maintenance, and care of your new power tool. Please read it thoroughly before use and keep it for future reference. The DEKO Cordless Drill is designed for a variety of applications including screwing, drilling into wood, wall, and plastics, making it ideal for home DIY projects and light professional tasks.

2. Important Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
2.1 General Safety Rules
- Keep your work area clean and well-lit. Cluttered or dark benches invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
- Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication.
- Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts.
- Avoid accidental starting. Be sure the switch is in the locked or off position before inserting the battery pack.
- Remove adjusting keys or wrenches before turning the tool on.
- Do not overreach. Keep proper footing and balance at all times.
- Use safety equipment. Wear eye protection. A dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
- Do not force the tool. Use the correct tool for your application.
- Do not use the tool if the switch does not turn it on or off.
- Disconnect the battery pack from the tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool.
- Store idle tools out of reach of children and other untrained persons.
- When the battery pack is not in use, keep it away from other metal objects that can make a connection from one terminal to another.
2.2 Battery Safety
- Read all instructions and cautionary markings on the battery cartridge before use.
- Do not disassemble the battery cartridge.
- If operating time has become excessively shorter, stop operating immediately.
- If electrolyte gets into your eyes, rinse them out with clean water and seek medical attention right away.
- Always cover the battery terminals with the battery cover when the battery cartridge is not in use.
- Do not short the battery cartridge by touching terminals with conductive material or storing it with other metal objects.
- Do not expose the battery cartridge to water or rain.
- Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F).
- Do not incinerate the battery cartridge even if it is severely damaged or worn out.
- Be careful not to drop or strike the battery.
2.3 Charger Safety
- Read all instructions and cautionary markings on the battery charger before use.
- Charge only Mosta rechargeable batteries. Other types of batteries may burst.
- Non-rechargeable batteries cannot be charged with this battery charger.
- Use a power source with the voltage specified on the nameplate of the charger.
- Do not charge the battery cartridge in the presence of flammable liquids or gases.
- Do not expose the charger to rain or snow.
- Never carry the charger by cord or yank it to disconnect from the receptacle.
- After charging or before attempting any maintenance or cleaning, unplug the charger from the power source.
- Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
- Do not operate the charger with a damaged cord or plug; replace them immediately.
- Do not operate or disassemble the charger if it has received a sharp blow, been dropped, or otherwise damaged. Take it to a qualified serviceman.
- The battery charger is not intended for use by young children or infirm persons without supervision.
- Do not charge the battery cartridge when the temperature is below 10°C (50°F) or above 40°C (104°F).
- Do not attempt to use a step-up transformer, engine generator, or DC power receptacle.
3. Product Overview
The DEKO Cordless Drill is designed for versatility and ease of use, featuring multiple settings for various tasks.

Key Features:
- 18+1 Torque Gear: Provides perfect torque adjustments for precise screwing and drilling.
- Two-Speed Switch: Optimized torque for two speed settings (0-350 RPM and 0-1350 RPM).
- 3/8 Inch Chuck: Suitable for a variety of applications and drill bits.
- LED Work Light: Effectively illuminates dark work spaces.
- Ergonomic Design: Lightweight design and rubberized handle for comfort and control.
- Forward/Reverse Button: Allows for easy one-hand operation to change rotation direction.
4. Setup
4.1 Installing or Removing Battery Cartridge
- Always switch off the tool before insertion or removal of the battery cartridge.
- To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slide it into place until it locks with a click.
- To remove the battery, press the release button on the battery cartridge and slide it out.
4.2 Charging the Battery
Before using the tool, ensure the battery is fully charged.
- Plug the battery charger into a proper AC voltage source. The charging light will illuminate green.
- Insert the battery cartridge into the charger, ensuring the plus and minus terminals align correctly.
- When the battery cartridge is fully inserted, the charging light will change from green to red, indicating charging has begun.
- The charging light will remain steadily red during charging.
- When the charging light changes from red to green, the charging cycle is complete.
- After charging, unplug the charger from the power source.
Tips for maintaining maximum battery life:
- Charge the battery before it is completely discharged.
- Always stop tool operation and charge the battery when you notice less tool power.
- Never recharge a fully charged battery cartridge; overcharging shortens battery service life.
- Charge the battery at room temperature (10°C-40°C / 50°F-104°F). Let a hot battery cool down before charging.
- If a new battery or one unused for a long period doesn't accept a full charge initially, discharge it completely and recharge a couple of times.

4.3 Inserting Drill Bits
The drill features a 3/8-inch keyless chuck for easy bit changes.
- Ensure the drill is switched off and the battery is removed.
- Twist the chuck counter-clockwise to open the jaws.
- Insert the drill bit or screwdriver bit into the chuck, ensuring it is centered.
- Twist the chuck clockwise to tighten the jaws securely around the bit.
- Pull on the bit to ensure it is firmly held.
5. Operating Instructions
5.1 Switch Action
To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. The tool is equipped with an electric brake that stops the chuck rotation quickly upon release of the trigger.
5.2 Reversing Switch Action
The drill has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the 'A' side for clockwise rotation (for drilling and tightening screws) or from the 'B' side for counter-clockwise rotation (for loosening screws). When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled.
Caution: Always check the direction of rotation before use. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. When not operating the tool, always set the reversing switch lever to the neutral position.
5.3 Two-Speed Control
The drill features a two-speed gearbox for optimal performance across different tasks. Use the speed selector switch located on top of the drill to choose between:
- Low Speed (0-350 RPM): Ideal for high-torque applications like driving screws or drilling larger holes.
- High Speed (0-1350 RPM): Suitable for faster drilling in softer materials.

5.4 Torque Settings
The 18+1 torque clutch allows you to adjust the torque output for precise control, preventing overtightening of screws or damage to materials. The settings range from 1 to 18 for screwing, with the 'drill' symbol setting for maximum torque for drilling applications.

5.5 LED Work Light
The built-in LED work light automatically activates when the trigger is pulled, illuminating your workspace for improved visibility in dimly lit areas.

5.6 Applications
The DEKO Cordless Drill is suitable for a wide range of applications:

- Screwing: Driving and removing screws with adjustable torque.
- Drilling Wood: Creating holes in various types of wood.
- Drilling Wall: Suitable for light masonry work (ensure appropriate drill bits are used).
- Drilling Plastics: Precision drilling in plastic materials.
6. Maintenance
Proper maintenance ensures the longevity and safe operation of your tool.
6.1 General Maintenance
- Always ensure the tool is switched off and the battery cartridge is removed before attempting any inspection or maintenance.
- Regularly clean the tool's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Keep the ventilation openings clear to prevent overheating.
- Inspect the chuck for any damage or wear.
- Check all screws and fasteners periodically to ensure they are tight.
- To maintain product safety and reliability, repairs and any other maintenance or adjustment should be performed by authorized service centers, always using original replacement parts.
7. Troubleshooting
Here are some common issues and their potential solutions:
- Tool not turning on: Ensure the battery is fully charged and properly inserted. Check that the reversing switch is not in the neutral (locked) position.
- Battery life is short: Ensure the battery is fully charged before use. Consider having spare batteries for extended work sessions. Battery capacity can decrease over time; if significantly reduced, a replacement battery may be needed.
- Gear shift lever not working correctly: If the speed selector or torque adjustment mechanism feels stiff or unresponsive, do not force it. Contact an authorized service center for inspection and repair.
- Drill bit slipping in chuck: Ensure the chuck is tightened securely around the drill bit. The keyless chuck should be hand-tightened firmly.
8. Specifications
The DEKO Cordless Drill is available in 12V, 16V, and 20V models, each offering robust performance for various tasks.
| Feature | DKCD12FU-Li (12V) | DKCD16FU-Li (16V) | DKCD20FU-Li (20V) |
|---|---|---|---|
| Voltage | 12 Volts | 16 Volts | 20 Volts |
| Chuck Type | Keyless | Keyless | Keyless |
| Chuck Size | 3/8-inch (10mm) | 3/8-inch (10mm) | 3/8-inch (10mm) |
| No Load RPM | 0-350 / 0-1350 | 0-350 / 0-1350 | 0-350 / 0-1350 |
| Rated Torque (N.m) | 28 | 32 | 42 |
| Clutch Settings | 18+1 | 18+1 | 18+1 |
| Max. Drilling Diameter | 10mm | 10mm | 10mm |
| Li-Ion Battery Capacity (a/h) | 1.5 | 1.5 | 1.5 |
| Battery Charging Time (hr) | 3-5 | 2.5 | 2.5 |
| Battery Charging Temperature | 10°C-40°C (50°F-104°F) | 10°C-40°C (50°F-104°F) | 10°C-40°C (50°F-104°F) |
| Item Dimensions (cm) | 22*22*5.5 | 22*22*7.5 | 22*22*7.5 |
| Drill Weight (kg) | 1 | 1.1 | 1.2 |
| Rated Input Power | 400W | 400W | 400W |
| Frequency | 50-60Hz | 50-60Hz | 50-60Hz |
| Power Source | DC, Battery | DC, Battery | DC, Battery |
| Application | Woodworking, Home DIY | Woodworking, Home DIY | Woodworking, Home DIY |
| Certification | CE | CE | CE |
Note: Specifications may vary slightly by region or product batch. Manufacturer reserves the right to change specifications without notice.
9. User Tips
Based on feedback from other users, here are some helpful tips for using your DEKO Cordless Drill:
- Battery Management: If you plan for extended use, consider having a spare battery charged and ready, as battery life can vary depending on the intensity of the task.
- Initial Check: Upon receiving your drill, perform a quick check to ensure all components are present and the drill functions correctly before starting any major projects.
- Material Suitability: While versatile, always ensure you are using the correct drill bit and torque setting for the material you are working with to achieve the best results and prevent damage to the tool or workpiece.
10. Warranty and Support
DEKO offers a 1-year limited warranty for this product. For warranty claims, technical support, or to purchase replacement parts (such as batteries), please contact DEKO customer service or an authorized dealer. Always use original DEKO replacement parts to ensure compatibility and maintain product safety.
A detailed user manual in PDF format is available for download here.