LetonPower Sealion Series Diving Flashlight

Contents

LetonPower Diving Flashlight User Manual

Model: Sealion Series (BB14-4S, BB14-7S, BB27-1S, B15, B24)

1. Introduction

The LetonPower Diving Flashlight is a high-performance underwater torch designed for various diving activities, including night diving, cave exploration, and underwater photography. Featuring a robust aviation aluminum body and IPX8 waterproof rating, it can withstand depths of up to 80 meters. This manual provides essential information for the safe and effective use and maintenance of your diving flashlight.

2. Safety Information

  • Waterproof Seal: Before each use, ensure all parts are securely tightened to maintain the waterproof seal.
  • Battery Handling: Remove batteries for safe storage if the flashlight will not be used for an extended period to prevent leakage and corrosion.
  • Overheating Protection: When using the flashlight on land, it is recommended to use low brightness settings. High brightness generates significant heat, and the flashlight will automatically reduce brightness if it overheats to prevent damage.
  • Charging: Begin charging the batteries when the indicator light signals low power to prevent over-discharge and prolong battery life.

3. Package Contents

Depending on your specific package, the contents may vary. Please check your order details. A typical package includes:

  • 1 x LetonPower Diving Fill Light Flashlight (Model may vary: BB14-4S, BB14-7S, BB27-1S, B15, B24)
  • 1 x Round Ball Handle Bracket
  • 2 x O-Rings (Spare)
  • 1 x Waterproof Lubricating Oil
  • 1 x L-Type Screwdriver
  • 1 x Hard Shell Rainproof Storage Tote Bag
  • Optional: 4 x Rechargeable 18650 Lithium Batteries
  • Optional: 1 x Charger
Package contents for BB14-4S diving flashlight, including the flashlight, ball mount, O-rings, lubricant, screwdriver, and case.
Figure 1: Package contents for BB14-4S model.
Package contents for BB14-7S diving flashlight, including the flashlight, ball mount, O-rings, lubricant, screwdriver, and case.
Figure 2: Package contents for BB14-7S model.
Package contents for BB14-7S diving flashlight with included rechargeable 18650 batteries and charger.
Figure 3: Package contents for BB14-7S model including batteries and charger.

4. Product Overview

The LetonPower Diving Flashlight is constructed from spaceflight-level aluminum alloy, ensuring durability and corrosion resistance. It features a double push switch for easy operation and a 120° wide beam angle, ideal for illuminating large underwater areas. The flashlight is equipped with multiple light sources for versatile use.

Detailed diagram of the BB14-4S diving flashlight, showing its double pressing switch, aluminum alloy material, 6 P90 white light LEDs (18000 Lumens), 4 XPE blue R5 LEDs (240 Lumens), 4 XPE red R5 LEDs (240 Lumens), 6mm thicken PC glass, deepened thread design for waterproofing, and round ball handle bracket.
Figure 4: Detailed view of the BB14-4S model components.
Key features of the diving flashlight: Diving depth 80m, Corrosion protection, Aviation aluminum construction, Fall protection up to 1m, powered by 4x 18650 batteries, and a 120 degree beam angle.
Figure 5: Key features and capabilities.

5. Setup

  1. Battery Installation: Unscrew the tail cap of the flashlight. Insert four 18650 rechargeable batteries according to the polarity markings.
  2. Secure Assembly: Ensure the tail cap is securely tightened to prevent water ingress.
  3. Attach Handle Bracket (Optional): If desired, attach the round ball handle bracket to the designated mounting point on the flashlight.

6. Operation

The flashlight features a double push switch for controlling different light modes.

Diver using two diving flashlights underwater, illustrating the different light modes: High, Medium, Low for white light, and Red, Blue, and Flash for colored lights. The image also shows the left and right switches on the flashlight.
Figure 6: Diver demonstrating light modes.

6.1. Switch Control

  • Left Button (White Light Source):
    1. Mode 1: White light high brightness
    2. Mode 2: White light with moderate brightness
    3. Mode 3: White light low brightness
  • Right Button (Red/Blue Light Source):
    1. Mode 1: Red light (620nM wavelength)
    2. Mode 2: Red light flashing
    3. Mode 3: Blue light (455nM wavelength)
    4. Mode 4: Double click the switch for red and blue flashing
  • Turning Off: In any mode, press and hold either switch for two seconds to turn off the flashlight.

6.2. Dimming Operation

The flashlight supports dimming for fine-tuning the shooting process. Specific instructions for dimming are not provided in this manual, please refer to the product's digital manual or manufacturer's website for more details.

6.3. Switch Indicator Light

  • Blue Light: Battery level is greater than 30%.
  • Red Light: Battery level is between 5% and 30%.
  • Flashing Red Light: Battery is low (flashes for 10 seconds, then turns off).
Video 1: Demonstration of the diving flashlight's blue and red light modes underwater, highlighting its effectiveness in illuminating marine life.

7. Maintenance

  1. Post-Dive Cleaning: After each use, thoroughly clean the diving lamp and other equipment with fresh water to remove salt and debris.
  2. O-Ring Care: Regularly clean, lubricate, and inspect the O-rings. This is crucial for maintaining the waterproof integrity and extending the lifespan of your flashlight.
  3. Contact Cleaning: Clean the battery and electrical contacts periodically to ensure optimal performance.
  4. Long-Term Storage: If the diving flashlight will not be used for an extended period, remove the batteries and store them separately to prevent leakage and corrosion.
  5. Charging Practices: Always charge the battery when the light begins to dim. This practice helps prevent battery overload and prolongs battery life.
  6. Storage Conditions: Store the diving light in a cool, dry place, away from direct sunlight.

8. Troubleshooting

If you encounter issues with your LetonPower Diving Flashlight, please consider the following:

  • Light Not Turning On: Check battery orientation and ensure they are fully charged. Verify all connections are tight.
  • Dim Light Output: Recharge batteries. Clean battery contacts.
  • Water Leakage: Immediately cease use. Inspect O-rings for damage or improper seating. Ensure all caps and seals are tightly secured.
  • Overheating: Reduce brightness, especially when using on land. Allow the flashlight to cool down.

For persistent issues, please contact customer support.

9. Specifications

FeatureDescription
Brand NameLetonPower
ModelSealion Series (BB14-4S, BB14-7S, BB27-1S, B15, B24)
Flashlight TypeDiving Flashlight / Fill Light
Body MaterialSpaceflight Level Aluminum Alloy
ColorBlack
Light SourceHID (P90 White, XPE Blue R5, XPE Red R5)
Lumen (BB14-4S)18000 Lumens (White Light)
Lumen (BB14-7S)22800 Lumens
Blue Light (XPE R5)240 Lumens (4 LEDs)
Red Light (XPE R5)240 Lumens (4 LEDs)
Wattage80W (Max 300W)
Operating Voltage3.7V
Power Supply4 * 18650 Rechargeable Batteries
Waterproof RatingIPX8
Diving Depth80 meters
Lighting Distance> 500 meters (300-500 meters specified for some models)
Beam Angle120°
Focal LengthNon-adjustable
ZoomNo
Switch ModeDouble Push Switch, STROBE
Support Dimmer> 8 Files
CRI90+
Net Weight456g
Dimensions12.3cm x 6.5cm x 5.3cm (approx. 4.9in x 2.6in x 2.1in)
CertificationsCCC, CE, CQC, GS, LVD, ROHS, UL
Run Time (Sealion B15)High: 70min, Medium: 240min, Low: 360min
Run Time (Sealion B24)High: 60min, Medium: 200min, Low: 300min
Product description table for BB14-7S diving fill light flashlight, listing model, color, switch type, irradiation distance, power supply, beam angle, indicator light, product material, light cup, maximum power, operating voltage, waterproof rating, net weight, and size.
Figure 7: Specifications for BB14-7S model.
Product description table for BB27-1S diving fill light flashlight, listing model, color, switch type, irradiation distance, power supply, beam angle, indicator light, product material, light cup, maximum power, operating voltage, waterproof rating, net weight, and size.
Figure 8: Specifications for BB27-1S model.
Dimensional drawing of the diving flashlight, showing length of 12.5cm (4.9in), and various diameters and heights.
Figure 9: Product dimensions.

10. User Tips

  • Land Use Caution: When using the flashlight on land, always use low brightness to prevent overheating and potential damage to the device.
  • O-Ring Maintenance: Regularly check and lubricate O-rings to maintain the waterproof seal, especially after each dive.
  • Battery Preparedness: Ensure batteries are fully charged before diving to avoid unexpected power loss during your underwater activities.
  • Color Accuracy: The high Color Rendering Index (CRI 90+) ensures realistic color reproduction, making it excellent for underwater photography and videography.
Image highlighting the Color Rendering Index (CRI) 90+ feature, showing various underwater scenes like diving, cave exploration, underwater shooting, and electric welding, emphasizing realistic color reproduction.
Figure 10: Color rendering index for realistic underwater visuals.

11. Warranty and Support

For any inquiries, technical support, or warranty claims, please contact LetonPower customer service:

  • Email: letonpower@Foxmail.com
  • Address: C302, building C, Antonio, No. 17, Wan'an Road Shajing street, Bao'an District Shenzhen, GuangDong China

You can also refer to the official user manual in PDF format for additional item guides and documents: LetonPower Diving Flashlight User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.