XUDA Wireless CarPlay Android Auto Adapter

1. Introduction

The XUDA Wireless CarPlay Android Auto Adapter is designed to convert your vehicle's existing wired CarPlay or Android Auto system into a wireless connection. This compact device offers a seamless and convenient way to integrate your smartphone with your car's infotainment system without the need for cables.

Key Features:

• Wired to Wireless Conversion for CarPlay and Android Auto
• Plug and Play functionality
• Automatic Connection after initial setup
• High-speed 5G WiFi and Bluetooth 5.0 connectivity
• Retains original car control functions (voice, knobs, touch screen, steering wheel)

2. Compatibility

Before using the adapter, please ensure your vehicle and smartphone meet the following requirements:

2.1 Vehicle Compatibility

• Your car must have a factory-installed wired CarPlay or Android Auto system.
• This product is compatible with 99% of cars featuring original wired CarPlay.
• BMW, Tesla, and some other specific models may not be compatible.

To confirm if your car has wired CarPlay or Android Auto:

1. Method 1: Connect your iPhone or Android smartphone to your car using a USB data cable. Check if a CarPlay or Android Auto connection interface logo appears on your car's display.
2. Method 2: Consult your car manufacturer's documentation or check their official app for supported car models.

Method 1: Check for CarPlay or Android Auto logo on your car's display when connected via USB.

Method 2: Scan QR codes to check for supported car models.

Compatible with various car brands including Audi, Benz, Porsche, VW, Volvo, Lexus, Honda, Toyota, Skoda, Mazda, Nissan, Jeep, Kia, BYD.

2.2 Smartphone Compatibility

• For Wireless CarPlay: iPhone 6 or later models with iOS 10 or above.
• For Wireless Android Auto: Android smartphones with Android 11 or higher, and the latest version of the Android Auto application. (Note: Huawei devices running EMUI are not supported for wireless Android Auto).

Supported phone operating systems: iPhone above iOS 10, Android Phone Android 11 and above.

3. Setup Instructions

Please read these instructions carefully before use.

3.1 Important Pre-Use Notes

• Delete or 'forget' any previous Bluetooth connections to your original car's system from your phone.
• Do NOT manually connect to the adapter's WiFi network or input a password. The adapter's WiFi will automatically connect after successful Bluetooth pairing.
• Only connect the adapter's Bluetooth to your phone, not to your original car's Bluetooth system.

3.2 Connection Steps

1. Start your car and wait for the car's infotainment system to fully load.
2. Plug the XUDA Wireless Adapter into the car's USB-A or USB-C port that is designated for wired Apple CarPlay or Android Auto. Ensure it is fully inserted.
3. On your smartphone, turn on both Wi-Fi and Bluetooth. (Do not connect to the 'smartbox-xxx' WiFi network directly).
4. Go to your phone's Bluetooth settings, search for a device named 'smartbox-xxx' (e.g., 'smartbox-B2C1' or 'smartbox-7B99'), and pair with it.
5. Follow any on-screen prompts on your phone or car display. For CarPlay, you may need to press 'Use CarPlay'. For Android Auto, confirm the connection.

Visual guide for the 3-step connection process.

Video demonstrating the connection process for both CarPlay and Android Auto.

4. Operating Instructions

4.1 Automatic Connection

After the first successful pairing, the adapter will automatically connect to your smartphone's CarPlay or Android Auto system when you enter the car, provided your phone's Bluetooth and Wi-Fi are enabled.

4.2 Retained Car Control Functions

The adapter ensures that all original car control functions remain operational, including:

• Voice control
• Knobs control
• Touch screen functionality
• Steering Wheel controls

The adapter maintains full functionality of your car's original control systems.

4.3 Wireless Car Life Features

Enjoy a relaxed wireless car experience with support for various functions:

• Navigation (Map applications)
• Music playback
• Siri voice control (for CarPlay)
• Split Screen functionality

Enjoy navigation, music, voice control, and split screen wirelessly.

4.4 YouTube Video Support (Android Auto Only)

The adapter supports YouTube video playback for wireless Android Auto. Please note that YouTube is NOT supported for wireless CarPlay.

For Android Auto YouTube playback:

1. Open Google Browser on your car's display.
2. Type "AAADAPK" and download the APK.
3. Open "AAAD" and download "Carstream".
4. Open "Carstream", go to settings, and choose "Enable desktop mode".
5. You can now enjoy videos from YouTube via wireless Android Auto.

Android Auto supports YouTube video playback with specific app installation.

5. Maintenance

To ensure optimal performance and longevity of your XUDA Wireless Adapter:

• Keep the adapter clean and free from dust or debris.
• Avoid exposing the adapter to extreme temperatures or moisture.
• Ensure the adapter is securely plugged into the USB port to maintain a stable connection.

The wireless adapter helps keep your car interior tidy and provides a fast, stable connection.

6. Troubleshooting

If you encounter issues with your XUDA Wireless Adapter, please refer to the following common problems and solutions:

6.1 General Connection Issues

• Adapter Indicator Light: Ensure the adapter's power indicator (blue or red light) is on. If not, check the USB connection.
• Car Compatibility: Double-check that your car model supports wired CarPlay/Android Auto.
• Smartphone Settings (CarPlay): If CarPlay doesn't connect, go to your iPhone's Settings > General > CarPlay. Select the 'smartbox-xxx' device and ensure CarPlay is enabled.
• Smartphone Settings (Android Auto): Ensure you have the latest version of the Android Auto app installed on your phone. If connection issues persist, try clearing the cache and data for 'Google Play services' on your Android phone (Settings > Apps > Google Play services > Storage & cache > Clear cache/Clear data).
• Reset Phone Connections: Turn off both Wi-Fi and Bluetooth on your phone, then turn them back on and attempt to reconnect.
• Clear Pairing Record: If issues persist, clear the pairing record for 'smartbox-xxx' from your phone's Bluetooth settings, restart your phone, and then re-pair the adapter.
• Test with Another Phone: If only one specific phone has trouble connecting, try testing the adapter with another compatible phone to rule out phone-specific issues.

6.2 Audio Input/Output Issues

• Other Bluetooth Devices: Check if your smartphone's Bluetooth is connected to other devices (e.g., earphones, smartwatch). Disconnect these devices before connecting to the adapter.
• Audio Output Option: During a call, verify that the 'Audio' output option on your phone or car display is set to CarPlay/Android Auto.

6.3 Adapter Light Stays On After Car is Turned Off

This is normal behavior. Many cars do not immediately cut off power to USB ports when turned off. The adapter's light will go out after a short delay. Its power consumption is minimal and will not drain your car battery.

6.4 Red Indicator Light Blinking

If the red indicator light is blinking continuously (it should normally be solid red when working):

• Ensure the adapter is fully inserted into the car's USB port.
• Try using a male-female USB adapter or a different USB port if available.

6.5 Unable to Automatically Reconnect

• Ensure your phone's Bluetooth and Wi-Fi functions are turned on and not occupied by other devices when you enter the car.
• Clear the pairing record for the adapter, restart your phone, and re-pair the adapter.

6.6 Multiple Phone Pairing

The adapter can be paired with a maximum of five phones. However, only one device can be connected at a time. If you wish to pair a new phone, you must first cancel the current connection. By default, the adapter's system will automatically connect back to the last used phone.

7. Specifications

Physical dimensions and included accessories of the A5 mini adapter.

8. User Tips

• For Android Auto, ensure your phone's WiFi Direct feature is enabled for optimal performance.
• The adapter's administration IP address is 192.168.8.1, which can be used for advanced settings or firmware updates.
• If you experience occasional connection drops, restarting your smartphone's Bluetooth can often resolve the issue.
• The adapter is designed for fast connection times once initially paired, providing a quick transition to wireless CarPlay or Android Auto.

9. Support & Software Upgrades

9.1 Customer Service

For technical support or service, please contact our technical experts via WhatsApp:

WhatsApp: +86 13682306067

Scan for Customer Service WhatsApp.

9.2 Software Upgrade Instructions

It is recommended to upgrade the software if you encounter any problems with the product. Ensure the adapter is powered on and your phone has a working internet connection (via SIM card). Keep your phone close to the adapter during the upgrade process. Refresh the upgrade page after a successful update.

9.2.1 For iPhone Users

1. Connect to Adapter's WiFi: Open Wi-Fi settings on your iPhone. Find the network named "smartBox-xxxx" and connect to it. The default password is 88888888.
2. Enter Upgrade URL: Open your iPhone's Safari browser and navigate to 192.168.8.1 to access the upgrade interface.
3. Perform Upgrade: Select the new version available and click 'Update'. After the upgrade is successful, refresh the page.

9.2.2 For Android Phone Users

Before starting, ensure you cut off any existing connection between the adapter and your phone.

1. Connect to Adapter's WiFi: Turn off Bluetooth on your Android phone. Turn on Wi-Fi, find the network named "smartBox-xxxx", and connect to it. The default password is 88888888.
2. Keep Connection: A prompt may appear asking to keep the connection despite no internet access. Press 'Yes' to maintain the connection.
3. Enter Upgrade URL: Open your phone's browser and navigate to 192.168.8.1 to access the upgrade interface.
4. Initiate P2P Connection: Click on "Wifi P2P" and wait for a "switch P2P OK" message to pop up. Click 'OK'.
5. WLAN Direct Connection: Go to your phone's Settings > WLAN > WLAN Direct Connection. Click on "smartBox-xxxx" to connect.
6. Complete Upgrade: Go back to the browser (192.168.8.1) to complete the upgrade process. The upgrade is expected to take 5-10 minutes. A successful update will be indicated on the screen.