1. Introduction
This manual provides detailed instructions for the safe and efficient use of your HZTZ POS9250 Thermal Label Printer. Please read it carefully before operation.
1.1 Safety Precautions
Warning:
- We strongly recommend using the adapter provided by our company. Connecting an improper adapter may cause fire, explosion, or damage to the printer.
- The print head contains heat-generating components. Immediately after printing, do not touch the print head and surrounding parts to avoid burns.
General Precautions:
- Do not use or store the printer in high temperature, high humidity, or polluted environments.
- Ensure the printer's power adapter is connected to a properly grounded outlet. Avoid using the same socket as large motors or other devices that cause power supply voltage fluctuations.
- Prevent water or conductive materials (such as metal) from entering the printer. In such an event, immediately turn off the power.
- The printer cannot print without paper; otherwise, it will seriously damage the platen and the thermal print head.
- Users are not allowed to disassemble the printer for repair or renovation.
- To ensure print quality and longevity, we recommend using thermal paper of equivalent quality.
- Keep this manual for future reference.
1.2 Key Features
- Fashionable appearance.
- Fast printing speed, saving printing time.
- Integrated design for easy paper loading.
- Intelligent detection, automatic feed and reverse paper.
- Label off intelligent function.
- Supports USB, LAN, Bluetooth, and optional WiFi interfaces, capable of handling large workload printing.
2. Specifications
| Feature | Specification |
|---|---|
| Printing Method | Direct line thermal |
| Printing Speed | 160mm/s (MAX) |
| Printing Machinery Life | 50KM or 100 million pulses |
| Resolution | 203dpi (8dot/mm) |
| Internal Font Library | Supports 11 font sizes |
| Print LOGO | Support downloading logo and trademark printing (ESC/POS) |
| Print Command | TSPL/CPCL command (ESC/POS command optional) |
| Media Sensor | Through-beam |
| Communication Interface | USB, USB+network port, USB+Bluetooth (WiFi interface optional) |
| Thermal Paper Types | Continuous paper, label paper, folded paper |
| Effective Printing Width | 25-100mm (MAX 800 dots) |
| Maximum Available Paper Width | 104mm |
| Maximum Diameter of Paper Bin | 100mm |
| Printing Paper Thickness | 0.06-0.30mm |
| Power Supply | DC 24V/2.5A |
| One-dimensional Code | UPC-A / UPC-E / JAN13(EAN13) / JAN8(EAN8) / CODE39 / ITF / CODABAR/ CODE93 / CODE128 |
| QR Code | QR CODE, PDF417 |
| Driver Support | Win2003/Win7/WinXP/Win 8/Win 10/Win 11/MACOS |
| Handheld Device Support | IOS/Android |
| Working Temperature | 0℃-45℃ (no condensation allowed) |
| Working Humidity | 10%-80%RH (no condensation allowed) |
| Storage Temperature | -20℃-60℃ (no condensation allowed) |
| Storage Humidity | 5%-95%RH (no condensation allowed) |
| Mechanical Noise | Less than 60dB |
3. Appearance and Components
The interfaces may vary depending on the specific model selected. The diagram below illustrates the general appearance and key components.


4. Setup
4.1 Paper Roll Installation
The printer supports various paper specifications. Follow these steps to install thermal paper:
- Open the printer cover.
- Place the thermal paper roll into the paper loading position as shown in the diagram.
- Pull the paper short to the outside of the box, then close the top cover.


4.2 Driver and Software Installation
The label editing software requires this driver to function. You can download printer drivers and other tools from the following link: www.cnfujun.com/d/39

General Driver Installation Steps:
- Find the "Label Printer Driver" folder, open it, and click the corresponding operating system driver to install it.
- If the interface is a USB printer, click "USB Port Detection" to automatically identify the USB port, then click "Install Driver". For other interfaces, click "Install Driver" directly.
- After successful installation, the printer properties interface will automatically pop up.
- Click "Print Test Page". If the printer prints a normal page, the installation is successful. If it prompts "Print Error", return to the "Port" option and select USB0002, USB003, or USB001.
4.3 Bluetooth Configuration (Windows Example)
- First, confirm if your device (e.g., laptop) has Bluetooth functionality, then enable Bluetooth. If successful, the Bluetooth icon will appear on the lower right side of your computer.
- Click the Bluetooth icon, then click "Add Bluetooth Device" to enter the next screen. Click "Add Bluetooth or other device" and confirm that Bluetooth status is on.
- Click Bluetooth.
- After a successful search, all Bluetooth printers will appear in the list. For example, if the searched printer is "BlueTooth Printer", click to select it.
- Enter the Bluetooth PIN code as prompted (the default printer PIN code: 1234), then click "Connect".
- When the prompt "Your device is ready to go!" appears, the pairing is successful. Click "Completed".
- To query the port assigned to the Bluetooth printer by the computer: Open "Printer Properties" of the label printer driver, select the COM port automatically assigned by the Bluetooth device in "Port", and set the port setting corresponding to the "Outgoing" COM port of the Bluetooth serial port. (Note: The Bluetooth device will automatically assign a COM port. If it cannot be found, please restart the computer.)
4.4 Network Port Configuration (Windows Example)
- Obtain IP Address: Turn off the printer, then press and hold the FEED button while turning on the power button. The printer will self-check the paper feed. Wait until the red light turns on and release the FEED button. The printer will automatically print a self-test page containing its IP address (Factory default IP address: 192.168.1.100).
- Open the printer properties interface, then select "Port" and click "Add Port".
- Select "Standard TCP/IP Port" and click "New Port...".
- Enter the printer's IP address (e.g., 192.168.1.100) and click "Next".
- The system will detect the TCP/IP port. If the device is not found, ensure the printer is on, connected to the network, and the IP address is correct. You may need to select "Standard Generic Network Card" as the device type.
- Complete the wizard by clicking "Finish".
- After clicking "Finish", select the newly added port and click "Apply".
- Return to the "General" tab and click "Print Test Page". If a normal page prints, the network port communication is successful.
5. Operation
5.1 Indicator Lights and Button Instructions
| POWER (Red Light) | POWER (Blue Light) | Printer Status |
|---|---|---|
| OFF (Lights off) | OFF (Lights off) | Printer shuts down |
| OFF (Lights off) | Always on | Printer power on/off |
| Flash (Light flashing) | OFF (Lights off) | Out of paper or label paper detection is abnormal |
Button Functions:
- Print Self-Test Page: When the power is off, press and hold the FEED button, then turn on the power button. The printer will self-check the paper feed. Wait until the ERROR red light lights up and release the FEED button.
- Printer Paper Feeding/Label Paper Positioning Calibration: With power on, press and hold the FEED button until the red light turns on and the machine beeps twice, then release it.
5.2 Label Calibration Method
For newly assembled products (including replacing the reflective type sensor or upgrade procedures), or if the paper is skipped or continuous printing occurs without stopping, the printer should be calibrated. The method is as follows:
Put the paper into the printer and power on the printer. When the power light is on, press and hold the "FEED" button for 5-6 seconds until the LED light flashes and the buzzer beeps. Then release the FEED button. After that, restart the printer and perform a test.
Note: The calibration operation may result in different calibration values due to different paper specifications. The calibration operation can be done according to different cases.
6. Maintenance
6.1 Print Head Cleaning
The print head should be cleaned if any of the following conditions occur:
- The printing is unclear.
- A vertical column of the printed page is not clear.
- Paper feeding noise is loud.
- There is too much carbon deposit on the print head.
Follow these steps to clean the print head:
- Turn off the printer, open the upper cover, and remove any paper if present.
- If you have just finished printing, wait for the print head to cool down completely.
- Use a soft cotton cloth dipped in absolute ethanol (ensure it is wrung out) to wipe away dust and stains on the surface of the thermal sensor of the print head.
- Wait for the absolute ethanol to evaporate completely, then close the upper cover and try printing again.
Notice:
- Ensure the power is turned off during routine maintenance of the printer.
- Do not touch the surface of the print head with your hands or metal objects. Do not use tweezers or other tools to scratch the surface of the print head, printing roller, and sensor. Organic solvents such as gasoline and acetone must not be used.
7. Troubleshooting
7.1 Label Calibration Exceptions
If the following cases occur after calibration:
- With paper, but the printer reports an error:
When this happens, remove the paper and power off the printer first. Then power on the printer. Once the red light flashes, immediately long-press the "FEED" button. Release it when the red light flashes again and the buzzer beeps. After that, wait 2 seconds, then restart the printer and test it again. - Without paper, but the printer does not report an error:
When this happens, remove the paper, power on the printer, and press and hold the "FEED" button for 8-10 seconds until the red light flashes and the buzzer beeps twice. Then release the button. After that, restart the printer and perform a test.
8. User Tips
- Always verify the specific connectivity options (USB, Bluetooth, LAN, WiFi) of your printer model before attempting to connect. Not all models support all options.
- For optimal performance, ensure your printer drivers and label editing software are always up to date by checking the official download link.
9. Warranty and Support
This product is covered by the Shop's Three Guarantees. For bulk purchase and technical support, please contact WhatsApp: +86 13622200981.
10. FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.