1. Product Overview
The SMAEL 8027 is a robust multi-functional electronic watch designed for outdoor sports enthusiasts. It features both analog and digital displays, offering a wide range of functions including time, date, alarm, stopwatch, and a luminous backlight for visibility in low-light conditions. Its 50-meter water resistance makes it suitable for various water activities.


Button Functions:
- LIGHT Key: Activates the backlight for the digital display.
- MODE Key: Cycles through different modes (Time, Alarm, Stopwatch, Time Setting).
- START Key: Used to adjust values during setting or to start/stop the stopwatch.
- RESET Key: Used to select items to adjust during setting or to reset the stopwatch.
2. Setup Instructions
Setting Digital Time and Date:
- From the normal time display, press the MODE button repeatedly until the seconds digits start flashing. This indicates you are in time setting mode.
- Press the RESET button to cycle through the settings: Seconds → Hour → Minute → Month → Date → Day of Week.
- While a setting is flashing, use the START button to adjust the value. Hold START to rapidly advance the digits.
- To switch between 12-hour and 24-hour format, press the RESET button when the hour setting is flashing.
- Once all settings are correct, press the MODE button to exit the setting mode.
Setting Analog Time:
The analog hands are typically set independently. Pull out the crown (the knob on the right side of the watch case) and rotate it to adjust the hour and minute hands. Push the crown back in to start the analog movement.
Setting the Alarm:
- From the normal time display, press the MODE button until 'AL' or 'Alarm' appears on the digital display.
- Press the RESET button to select the hour or minute setting.
- Use the START button to adjust the alarm hour and minute.
- Press MODE to confirm and exit.
- To turn the alarm ON/OFF, press the START button while in the alarm display mode. An alarm icon will appear/disappear.
3. Operating Instructions
Using the Stopwatch:
- Press the MODE button until 'ST' or 'Stopwatch' appears on the digital display.
- Press the START button to begin timing.
- Press START again to pause the timing.
- Press the RESET button to clear the stopwatch to zero.
- Press MODE to exit the stopwatch mode.
Activating the Backlight:
Press the LIGHT button (usually located on the top-left side of the watch) to illuminate the digital display for a few seconds.

Dual Time Display:
The watch supports two time zones. The analog display shows the primary time, while the digital display can be set to a second time zone. Follow the digital time setting instructions to adjust the digital display to your desired second time zone.
4. Maintenance
Water Resistance (50M):
Your SMAEL 8027 watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for showering, swimming in shallow water, and general water exposure. However, it is NOT suitable for diving, snorkeling, or high-pressure water activities. Do not operate buttons underwater.

Cleaning and Care:
- Wipe the watch regularly with a soft, dry cloth to remove dirt and sweat.
- For stubborn dirt, use a slightly damp cloth and mild soap, then wipe dry.
- Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
- The watch features an acrylic mirror. While scratch-resistant, avoid harsh abrasives or chemicals that could damage it.
Battery Replacement:
When the display becomes dim or the watch stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
5. Troubleshooting
- Digital Display is Blank or Faint:
- Check if the battery needs replacement. If recently replaced, ensure it was installed correctly.
- Extreme temperatures can affect LCD performance; allow the watch to return to normal operating temperature. - Buttons Not Responding:
- Ensure no buttons are stuck. Gently press each button to check for proper movement.
- If the watch has been exposed to water, ensure it is completely dry. - Time is Inaccurate:
- Re-set the time following the instructions in Section 2.
- If the issue persists, the battery may be low, or the movement may require servicing. - Water Inside the Watch:
- If condensation or water droplets appear inside the watch, stop using it immediately and seek professional service. This indicates a breach in the water resistance.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | SMAEL |
| Model | 8027 |
| Display Type | Pointer + Number (Analog + Digital) |
| Movement | Digital (Japanese Movement) |
| Case Material | Alloy |
| Band Material Type | Silicone (TPU) |
| Mirror Material | Organic Glass (Acrylic) |
| Clasp Type | Buckle (Needle Buckle) |
| Water Resistance Depth | 5Bar (50 meters) |
| Dial Diameter | 48mm |
| Case Thickness | 17mm |
| Band Width | 20mm |
| Net Weight | 72g |
| Functions | Two location time, Stopwatch, Week display, Alarm, Calendar display, Night light display, 12/24 hour system |
7. User Tips
- To prolong battery life, avoid unnecessary use of the backlight.
- Always ensure the crown is pushed in completely after setting the analog time to maintain water resistance.
- If you travel frequently, utilize the dual time function to keep track of two different time zones easily.
- Regularly check the watch strap for wear and tear, especially if used during sports activities.
8. Warranty and Support
For any issues or questions regarding your SMAEL 8027 watch, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase for any warranty claims. Do not attempt to open or repair the watch yourself, as this may void the warranty and compromise its water resistance.