XINOWY Q58 Max Motorcycle Helmet Bluetooth Intercom User Manual

1. Product Overview

The XINOWY Q58 Max is a motorcycle helmet Bluetooth intercom system designed to enhance your riding experience with communication, entertainment, and navigation features. It boasts a robust IP65 waterproof rating, dual-core processing for stable performance, and supports multi-scene mixing for simultaneous audio streams.

2. Package Contents

Please check the package carefully to ensure all items are present:

• Q58-Max Host (Intercom Unit) x 1
• Speaker Microphone x 1 (Type-C port hose headphones)
• Clip-on Base x 1
• Rubber Back Clip Base x 1
• Velcro Installation Kit (Host Velcro x 1, Microphone pole Velcro x 2, Adhesive x 1)
• Type-C Charging Cable x 1
• User Manual x 1

3. Device Layout and Controls

Familiarize yourself with the buttons and ports on your Q58 Max unit:

• Power On/Off / Play Pause / Answer Hangup Button: Controls power, music playback, and call management.
• Previous Song / Volume Down Button: Navigates music tracks and decreases volume.
• Next Song / Volume Up Button: Navigates music tracks and increases volume.
• Voice Assistant / Music Sharing Button: Activates voice assistant and initiates music sharing.
• Intercom Button: Manages intercom communication.
• Mode Key: Cycles between Bluetooth, Micro SD card, and FM radio modes. Also controls illumination and EQ sound.
• Illuminated Lamp: Provides visual indication and can function as an LED light.
• LCD Display: Shows status, battery, FM frequency, etc.
• Micro SD Card Slot: For expandable storage (4-32GB).
• Charging Port: Type-C port for charging.
• Speaker/Microphone Interface: Connects the headset.

4. Setup and Installation

4.1 Initial Test

Before installing the headset into your helmet, it is highly recommended to connect the Q58 Max to your mobile phone and test the sound effect and volume. This allows you to verify functionality before permanent installation.

4.2 Charging the Device

The Q58 Max is equipped with a 1000mAh built-in battery. Use the provided Type-C charging cable to charge the device. A full charge takes approximately 2 hours.

• Connect the Type-C charging cable to the charging port on the Q58 Max and to a USB power source.
• The charging indicator (red light) will be continuously on during charging.
• The red light will turn off once the device is fully charged.
• Note: If the machine is turned on and you plug in the charger, the machine will automatically shut down to charge.

4.3 Helmet Installation

The Q58 Max features a split installation design for simple, convenient, and safe mounting on various helmet types (Modular, Motocross, Open face, Full Face, Flip Up Helmet, Universal).

• Attach the clip-on base or adhesive base to the side of your helmet.
• Slide the Q58 Max host unit onto the installed base.
• Carefully route the speaker microphone wires inside the helmet, ensuring the speakers are positioned correctly over your ears and the microphone is near your mouth.
• If you experience a significant difference in sound effect or volume after installation, adjust the speaker position inside the helmet.

5. Operating Instructions

5.1 Power On/Off

• Power On/Off: Press and hold the Power On/Off button for 3 seconds.
• Voice Announcement Language: When Bluetooth is disconnected, double-click the Power On/Off button to switch between English and Chinese voice announcements.

5.2 Bluetooth Connection

• When Bluetooth is not connected, the Bluetooth icon on the LCD display will flash slowly.
• Once successfully connected, the Bluetooth icon will be continuously on.

5.3 Intercom Function

The Q58 Max supports dual-mode intercom for two riders up to 500 meters apart.

5.3.1 Two-Machine Intercom Connection

1. After both machines are powered on, short press the Intercom button on both devices to enter intercom mode.
2. The intercom icon will flash slowly or quickly, accompanied by a tone "intercom receiving mode" or "intercom transmitting mode".
3. To switch between receiving and transmitting modes, double-click the Intercom button.
4. For pairing, one device needs to be in intercom transmitting mode, and the other in intercom receiving mode.
5. Upon successful pairing, a tone "intercom connection" will be heard, enabling two-person intercom calls.

5.3.2 Intercom Reconnection

If two machines have been previously connected, after powering on, short press the Intercom button on both devices to enter intercom mode. The two machines will automatically reconnect (the intercom mode will remember the previous connection).

5.3.3 Intercom and Phone Calls

If the intercom is active and a phone call comes in (while Bluetooth is connected to your phone), the system will automatically switch to the phone call. After hanging up, the intercom connection will be restored.

5.4 Music Sharing

Share your music with another rider for a synchronized audio experience.

1. After both devices are powered on, connect one mobile phone to one device via Bluetooth to play music.
2. On both devices, short press the Music Sharing button to enter pairing mode. The music sharing icon will flash fast or slow, accompanied by a tone "intercom receiving mode" or "intercom transmitting mode".
3. For successful music sharing, one device should be in music sharing transmitting mode, and the other in music sharing receiving mode.
4. Upon successful pairing, the music sharing icon will show a successful connection, and a "music sharing connection successful" beep will be heard.
5. If both devices are connected to Bluetooth to play music, both devices will hear each other's music and their own mobile phone player's music.
6. Double-click the Music Sharing button to switch between music sharing transmitting mode and receiving mode.

5.5 Telephone Function

• Answer/Hang Up: Short press the Power On/Off button.
• Decline Call: Press the Power On/Off button for 2 seconds during an incoming call.
• Manual/Automatic Answer: Double-tap the Volume+ button to toggle between manual and automatic call answering.
• Endgame Replay/Cancel Call: Double-click the Power On/Off button for endgame replay or short press to cancel an outgoing call.

5.6 Music Playback (Bluetooth & SD Card)

• Play/Pause: Short press the Power On/Off button.
• Next Song: Short press the Next Song/Volume Up button.
• Previous Song: Short press the Previous Song/Volume Down button.
• Volume Up: Long press the Next Song/Volume Up button.
• Volume Down: Long press the Previous Song/Volume Down button.

5.6.1 Micro SD Card Playback

The Q58 Max supports Micro SD cards (4-32GB) for music playback.

• Insert a Micro SD card containing MP3 music files into the Micro SD card slot.
• Long press the Mode key to cycle to Micro SD card mode.
• Music playback controls are the same as Bluetooth mode.
• SD Card Music Sharing: Insert a valid SD card into one machine to play music, then follow the music sharing instructions (Section 5.4) to share the SD card music with another device.
• Card Reader Mode: When the device is powered on, insert a TF card, then connect the device to a computer via the USB cable. The device will automatically enter card reader mode, allowing you to copy or delete files on the computer.

5.7 FM Radio Function

• Enter FM Mode: Long press the Mode button to switch to FM mode (the display will show the FM signal icon).
• Auto Search & Save: Short press the Voice Assistant button to perform a fully automatic one-touch station search and automatic storage of stations.
• Switch Saved Stations: Short press the Next Song/Volume Up or Previous Song/Volume Down buttons to switch between saved stations.
• Mute/Play: Short press the Power On/Off button to mute or play in FM mode.

5.8 AI Voice Assistant

• Activate: Double-tap the Voice Assistant button (under successful Bluetooth pairing) to wake up the AI voice assistant.
• Deactivate: Long press the Voice Assistant button again to turn off the voice assistant.

5.9 LED Lighting

• Turn On/Off: Double-click the Voice Assistant button to turn on the LED light. This is simple and easy to use in dark or complex environments.

5.10 Multi-Scene Mixing Function

The Q58 Max features dual DSP audio multiprocessing capability, allowing the intercom and Bluetooth functions to work independently without affecting each other. When both are connected successfully, the two audio streams can be mixed and output to the speaker. This means you can listen to music while using intercom navigation, talk, and enjoy clear sound quality for an immersive audio experience.

5.11 EQ Personalized Sound

The device offers professional acoustic laboratory tuning with 6 preset sound effects (Natural, Rock, Popular, Classical, Jazz, Country) to suit different preferences. Double press the Mode key to switch between EQ sound profiles.

6. Maintenance and Care

• Do not expose the product to open flames to avoid explosion.
• Do not disassemble the product, as this may damage its electronic components.
• Keep the product away from sharp objects to prevent damage.
• If not used for a long time, store the device in a dry place.
• The Q58 Max is IP65 rated for deep waterproofing, making it fearless of dust and rain. However, avoid prolonged submersion.

7. Troubleshooting

• Intercom Not Transmitting / Hearing Own Voice: If your intercom does not transmit or you hear your own voice inside the helmet, ensure the microphone is correctly positioned near your mouth and not obstructed. Also, verify that the speakers are properly aligned with your ears. Re-check intercom pairing steps.
• Unable to Pair Devices: Refer to the "Intercom Function" (Section 5.3) and "Music Sharing" (Section 5.4) instructions for detailed pairing steps. Ensure one device is in transmitting mode and the other in receiving mode during pairing.
• Factory Reset: If you experience persistent issues or wish to clear all pairing information, perform a factory reset. With the machine powered on and not connected to Bluetooth or intercom, simultaneously press and hold the Volume Up and Volume Down keys for 5 seconds. The indicator light will flash, and the device will restore factory settings.
• SD Card Not Recognized: Ensure the Micro SD card is 4-32GB and contains MP3 files. Reinsert the card firmly. If using card reader mode, ensure the device is powered on before connecting to the computer.

8. Specifications

9. User Tips

• Speaker Placement: For optimal sound quality and volume, ensure the speakers are directly aligned with your ears inside the helmet. Adjust their position if sound quality is poor after installation.
• Microphone Position: Place the microphone close to your mouth to ensure clear voice transmission during intercom or phone calls and to minimize background noise.
• Controlling LED Light: The LED light can be turned on/off by double-clicking the Voice Assistant button, useful for visibility or in dark conditions.
• Simultaneous Audio: Leverage the multi-scene mixing function to listen to music from your phone or SD card while still being able to hear intercom communication or navigation prompts.
• SD Card Music & Bluetooth: Yes, you can listen to music from an SD card while simultaneously connected to your phone via Bluetooth. The mixing function allows both audio streams.
• Voice Commands: Utilize the AI voice assistant for hands-free control of your device and phone functions.

10. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF:

View User Manual (PDF)

If you encounter any issues not covered in this manual or require technical assistance, please contact the seller or manufacturer's customer support.

11. FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.