CNSPEED YC100163

Contents

CNSPEED 5-inch 4-in-1 Car Tachometer Instruction Manual

Model: YC100163

1. Introduction

Thank you for purchasing the CNSPEED 5-inch 4-in-1 Car Tachometer. This multi-function gauge is designed for 12V petrol vehicles (4, 6, or 8 cylinder engines) and provides real-time monitoring of your vehicle's RPM, water temperature, oil temperature, and oil pressure. It also features a customizable shift light for optimal performance. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

CNSPEED 5-inch 4-in-1 Car Tachometer with RPM, Water Temp, Oil Temp, and Oil Pressure gauges, and shift light

Figure 1: CNSPEED 5-inch 4-in-1 Car Tachometer

2. Package Contents

Please verify that all items are present in your package:

  • 1 x 5-inch 4-in-1 Gauge Unit (Tachometer, Water Temp, Oil Temp, Oil Press)
  • 1 x External Shift Light
  • 1 x Oil Temperature Sensor (Thread specification: 1/8 NPT)
  • 1 x Water Temperature Sensor (Thread specification: 1/8 NPT)
  • 1 x Oil Pressure Sensor (Thread specification: 1/8 NPT)
  • 1 x Mounting Bracket and Hardware (including protective wire)
  • 1 x User Manual (English)
All components included in the CNSPEED 4-in-1 gauge package

Figure 2: Complete Package Contents

3. Specifications

FeatureSpecification
Gauge Size5 inches (125.14mm diameter, 93.75mm depth)
Shift Light Size43mm (1.69") diameter, 103.2mm (4.06") length
Applicable Models12V Petrol Vehicles (4, 6, 8 Cylinder)
Tachometer Range0-11000 RPM
Water Temperature Range40-120 °C
Oil Temperature Range50-150 °C
Oil Pressure Range0-7 Bar
MaterialABS
Item Weight1.5 kg
Item Dimensions (Gauge)25cm (L) x 21cm (W) x 12cm (H)
Special Features4-in-1 functionality, Shift light alerting
OEM / Interchange Part No.YC100163
OriginMainland China
Placement on VehicleFront
Front and side dimensions of the 5-inch 4-in-1 tachometer unit

Figure 3: Gauge Unit Dimensions

Dimensions of the external shift light

Figure 4: Shift Light Dimensions

4. Installation and Wiring

Professional installation is highly recommended for this product. Incorrect wiring can lead to damage to the gauge or your vehicle's electrical system. Ensure the vehicle's battery is disconnected before beginning installation.

4.1. Mounting the Gauge

  1. Choose a suitable location on your dashboard or A-pillar for optimal visibility.
  2. Use the provided mounting bracket and hardware to securely fasten the gauge.
  3. Ensure the gauge is positioned so that the shift light is clearly visible.
Mounting bracket components for the 4-in-1 gauge

Figure 5: Mounting Bracket Components

4.2. Wiring Diagram

Follow the wiring diagram carefully. The gauge is compatible with 4, 6, and 8-cylinder petrol engines. The 'Speed signal' wire (Green) should be connected to the ignition coil or the vehicle's ECU (Engine Control Unit) for RPM readings.

Wiring diagram for the 4-in-1 electronic tachometer, showing connections for power, ground, dash light, speed signal, water temp, oil temp, and oil pressure sensors.

Figure 6: Wiring Diagram (814 Series)

  • Yellow Wire: Connect to the Dash Light Circuit (for illumination).
  • Red (+) Wire: Connect to the Ignition Switch (switched 12V power).
  • Black (-) Wire: Connect to Battery Negative or a reliable chassis ground.
  • Green Wire: Connect to the Speed Signal (from the ignition coil or ECU).
  • Orange Wire: Connect to the Pressure Sensor.
  • White Wire: Connect to the Oil Temperature Sensor.
  • Blue Wire: Connect to the Water Temperature Sensor.

4.3. Sensor Installation

Install the provided oil temperature, water temperature, and oil pressure sensors into their respective ports on your engine. Ensure proper sealing to prevent leaks. The sensors have a 1/8 NPT thread specification.

Oil pressure sensor, water temperature sensor, and oil temperature sensor included with the gauge

Figure 7: Included Sensors

5. Operation

5.1. Power On

Once properly installed and wired, turn your vehicle's ignition to the 'ON' position. The gauge will perform a self-test, and the needles will sweep across their ranges before settling. The backlight will illuminate.

5.2. Reading the Gauges

  • RPM Meter: The large central dial displays engine revolutions per minute (RPM x 1000).
  • Water Temp Gauge: Displays engine coolant temperature in degrees Celsius.
  • Oil Temp Gauge: Displays engine oil temperature in degrees Celsius.
  • Oil Press Gauge: Displays engine oil pressure in Bar.

5.3. Setting the Shift Light

The shift light can be configured to alert you when your engine reaches a specific RPM. Refer to the video below for a demonstration on how to set the shift light warning function.

Video 1: Demonstration of gauge startup, RPM sweep, and shift light setting.

Typically, there are 'SET' and 'MODE' buttons on the gauge face. Use these buttons to navigate through the settings and adjust the desired RPM threshold for the shift light activation.

6. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the gauge face. Avoid abrasive cleaners or solvents that could damage the plastic or finish.
  • Wiring Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Sensor Check: Ensure sensors are free from debris and properly seated.
  • Environmental Conditions: While designed for automotive use, extreme temperatures or moisture can affect performance.

7. Troubleshooting

ProblemPossible CauseSolution
Gauge does not power onNo power supply, faulty ground, blown fuseCheck power (Red wire) and ground (Black wire) connections. Inspect vehicle's fuse box.
Tachometer reads incorrectly or not at allIncorrect cylinder setting, poor speed signal connectionEnsure the gauge is set for the correct number of cylinders (4, 6, or 8). Verify the Green speed signal wire connection to the ignition coil or ECU.
Temperature/Pressure gauges read incorrectlyFaulty sensor, poor sensor wiring connectionCheck the wiring to the respective sensor (Orange for pressure, White for oil temp, Blue for water temp). Inspect the sensor for damage or improper installation.
Shift light does not activateShift point not set, faulty lightRefer to Section 5.3 or the provided video to set the shift light RPM threshold. Check the shift light wiring.

8. User Tips

  • Cylinder Selection: The tachometer's cylinder setting (4, 6, or 8) is crucial for accurate RPM readings. Ensure this is correctly configured during setup according to your vehicle's engine type.
  • Shift Light Customization: Take advantage of the customizable shift light to optimize your driving experience, especially in racing or performance applications. Experiment with different RPM settings to find what works best for your vehicle and driving style.
  • Professional Installation: While DIY installation is possible for experienced individuals, professional installation is highly recommended to avoid potential electrical issues and ensure optimal performance and safety.

9. Warranty and Support

This product comes with a half-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.