1. Important Cautions and Safety Information
Please read this manual thoroughly before operating the device. Keep this manual for future reference.
WARNING
The "WARNING" symbol indicates critical instructions or procedures. Failure to comply may lead to injury, death, product damage, or property damage.
CAUTION
The "CAUTION" symbol indicates important instructions or procedures. Failure to follow may result in injury or damage to the product or property.
RISK OF ELECTRIC SHOCK - DO NOT OPEN. To reduce the risk of electrical shock, do not remove covers. No user-serviceable parts inside. Refer servicing to a qualified service professional.
Installation Precautions
It is strongly recommended to have this product professionally installed by a certified professional. Self-installation by individuals without professional training in electronic equipment and motorized vehicle accessories can be hazardous and may pose risks of electric shock, injury, or other hazards. Any required repairs should be directed to a qualified service center.
Before installation, disconnect the negative (-) battery cable to prevent potential electrical shorts. This unit is designed for use with a 12-volt battery and negative grounding exclusively. Failure to follow these guidelines could lead to fire or malfunction.
Product Safety
In accordance with Federal and Local laws, viewing video content while the vehicle is in motion is prohibited. This product is designed with a parking brake safety feature, which must be properly connected and engaged to view video content. Tampering with or disabling this safety feature will invalidate any existing warranty.
Trademark Information
- The Apple CarPlay logo indicates compliance with Apple performance standards. Apple is not responsible for the operation or safety compliance of this vehicle's user interface. Use with iPhone or iPod may affect wireless performance. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. Apple CarPlay is a trademark of Apple Inc.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by SANPTENT Digital Media Receiver is under license. Other trademarks and trade names are those of their respective owners.
2. Product Features
- Supports wired USB & WiFi CarPlay and Android Auto.
- Features CID (Center Information Display) / RSE (Rear Seat Entertainment) Dual display.
- USB BC1.2 for smartphone fast charging.
- 1080P full HD multimedia decoder.
- Supports 720P AHD Night Vision Backup Camera (optional).
- Suitable for 12V~24V vehicles.
- Bluetooth Compatible; Sirius XM Compatible; Voice Control.
- Supports FM Radio.
- User-friendly Digital Control Interface.
- Supports TF card & AUX IN Connectivity; USB Port Playback.
- EQ Audio Setting.
- Multiple language settings.
- Date and Time Setting.
- Easy installation.
3. Product Overview
Familiarize yourself with the components and interfaces of your device.
Component List:
- Display
- AUX port
- AV IN (For Optional Back Up Camera)
- USB port
- TF card slot
- DC-12V power port
- Mount
- Knob
- Lock
- Adhesive Suction Cup
- Power Plug
- Power switch button
4. Setup Instructions
4.1 Mounting the Unit
- Insert the adhesive suction cup mount into the bracket on the back of the main unit and slide it up to lock it in place.
- Remove the protective film from the adhesive suction cup on the bottom of the mount.
- Press the suction cup onto your dashboard and push the lock down to secure it.
- Adjust the unit display angle and height to ensure it does not block your view of the road, then tighten the knob to secure it in place.
4.2 Power Connection
- Connect one end of the supplied power cable (Type-C) to the DC 12V power port of the device.
- Plug the adapter end of the power cable into your car's DC 12V power outlet.
4.3 Backup Camera Setup (Optional)
If your unit includes the optional 8 LED reversing camera, follow these wiring instructions:
The reversing camera input connects via a 2.5mm to RCA adapter cable. The unit automatically switches to the reverse image when the car is in R gear.
5. Operating Instructions
5.1 Home Menu
Scroll Left/Right at the bottom of the screen to navigate between pages. The apps displayed may vary depending on the connected phone.
5.2 Main Functions Overview
- FM TX: Transmits FM signals (does not support FM radio reception).
- USB: Reads information from a USB flash drive.
- TF: Reads information from a TF card.
- PhoneLink: Activates CarPlay, Android Auto, and Mirror Link functions.
- BT: Used for wireless connections (Bluetooth).
- Clock: Time setup.
- Calendar: Displays the calendar.
- Setup: Accesses device settings.
- AV IN: Displays the view from the front camera (if connected).
- Calculator: Provides a basic calculator function.
5.3 CarPlay and Android Auto Connection
The device supports both wired and wireless connections for Apple CarPlay and Android Auto.
Wireless CarPlay Connection:
- Connect your iPhone's Bluetooth to the device's Bluetooth.
- Upon first pairing, your phone will prompt "Use CarPlay" for confirmation. Select pairing to enable wireless CarPlay.
Note: You can click "CarHome" to return to the unit's homepage.
Wired CarPlay Connection:
Connect your iPhone to the USB port using an Apple original/certified cable.
Wireless Android Auto Connection:
- Pair your mobile phone's Bluetooth with the device's.
- Confirm to use Android Auto. It will automatically connect next time.
- To disconnect, turn off the car stereo's Wi-Fi.
Note: You can click "CarHome" to return to the unit's homepage.
Wired Android Auto Connection:
Connect your Android phone to the USB port using an Android original/certified cable.
5.4 Mirror Link (AirPlay / Phone Link)
Mirror Link allows you to display your phone's screen on the unit. This function can be connected via CarPlay, Android Auto, or Mirror Link for clearer viewing on the large screen.
To use wired Mirror Link, connect your phone to the device with an original cable. When prompted, choose "trust" to enjoy the full HD display of video or images.
5.5 Audio Output Methods
The unit has a built-in speaker, but for louder sound, you can transmit audio to your car's speakers:
- FM Radio Transmitter: Set the same FM radio channel on this machine and your car's radio. Avoid channels occupied by existing FM stations.
- AUX Cable: Plug a 3.5mm AUX cable into the unit's audio port and your car's original AUX port (if available).
5.6 Multimedia Playback (USB & TF Card)
The unit supports playback from USB flash drives and TF cards. You can play music, videos, and view pictures.
Music Play Interface:
- Previous Song: Tap to return to the previous song.
- Next Song: Tap to skip to the next song.
- Play/Pause: Tap to pause or start playback.
- EQ: Tap to enter the sound effect interface and select EQ effects.
5.7 Bluetooth Music/Call
Connect your phone via Bluetooth for faster transmission speeds, low latency, and stable connections for music playback and hands-free calling.
From the Main Menu, enter the BT dialing interface to make calls.
5.8 Settings Overview
Access the settings menu to customize your device.
- Basic Setup: Adjust beep, reverse mute, color lamp mode.
- Factory Set: Input password 779822 to access factory settings.
- Sound Setup: Choose different modes for audio enjoyment.
- Display Setup: Adjust brightness.
- Background: Change wallpaper.
- ScreenSave: Configure screen saver options.
- Language: Select language (English, Chinese, Spanish, etc.).
- Time Setup: Adjust date and time.
- Version: View basic information about your unit.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Do not use abrasive cleaners or solvents.
- Storage: If storing the unit for an extended period, disconnect it from power and store in a cool, dry place.
- Software Updates: Periodically check the manufacturer's website for any available firmware updates to ensure optimal performance and new features.
7. Troubleshooting
- No Sound from Car Speakers:
- Ensure the FM transmitter is set to the same frequency as your car radio and that the frequency is not already in use.
- Verify the AUX cable is securely connected to both the unit's audio port and your car's AUX input.
- Check Bluetooth connection for audio output if using a phone.
- Unit Does Not Power On:
- Check the power cable connection to both the unit and the car's 12V power outlet.
- Ensure your car's 12V power outlet is functioning.
- Verify the car battery is connected and charged.
- CarPlay/Android Auto Not Connecting:
- For wireless connection, ensure Bluetooth is paired and Wi-Fi is enabled on the unit (for Android Auto).
- For wired connection, use an original/certified USB cable and ensure it's securely connected.
- On iPhone, confirm "Use CarPlay" when prompted.
- Reversing Camera Not Displaying:
- Check the wiring connections for the camera, especially the power (reverse light +12V) and ground.
- Ensure the video input cable is correctly connected to the AV IN port.
- Verify the car is in reverse gear.
- Forgot Factory Settings Password: The factory settings password is 779822.
8. Specifications
| Attribute | Value |
|---|---|
| Model Name | 10.26 Inch Car Monitors |
| Brand Name | hippcron |
| Item Type | Car Monitors |
| Display Size | 9" (10.26 Inch shell size) |
| Resolution | 1024*600 |
| Placement | In-Dash |
| Item Weight | 800g |
| Item Size (Shell) | 242 x 95mm (9.53 x 3.74 inches) |
| Material | Glass & plastic |
| Certification | CE |
| Origin | Mainland China |
| Power Compatibility | 12V~24V vehicles |
Package Dimensions:
- Length: 29 cm
- Width: 14 cm
- Height: 11 cm
- Weight: 0.889 kg
9. User Tips
- Audio Output: If you're not getting sound through your car's speakers, remember to check all three output methods: FM transmitter, AUX cable, and Bluetooth connection. Ensure the FM frequency is clear and matched, or the AUX cable is fully inserted.
- Camera Option: The reversing camera is an optional accessory. If you intend to use one, ensure you select the "With 8 LED" option during purchase, as the "Monitor Only" configuration does not include the camera kit.
- Factory Settings: If you need to access factory settings, the password is 779822.
- Power Compatibility: This unit is designed to work with both 12V and 24V vehicle electrical systems.
- External Microphone: While not explicitly listed, some users inquire about external microphone support. Check the device's specifications or contact customer support for compatibility with external microphones.
10. Warranty and Support
For any difficulties installing or operating the unit, please contact customer service. They are available to answer your questions and welcome your suggestions.
For additional guides and documents, you may refer to the official user manual PDF: User manual (PDF).
