XTOOL D7W

Contents

XTOOL D7W Smart Diagnostic System User Manual

Model: D7W | Brand: XTOOL

1. General Introduction

The XTOOL D7W smart diagnostic system, also referred to as the "Scan Tool," is an advanced diagnostic device built on the Android operating system. It is designed to provide comprehensive and accurate diagnostic information for a wide range of vehicles. This tool supports multiple languages and is suitable for various countries and regions.

1.1 Device Components

Tablet

XTOOL D7W Tablet and VCI Box

The tablet features a 7-inch display and runs on Android 10 OS. It is equipped with a Type-C Port, Reset Hole, Power Button, Microphone, Camera, Tablet Holder, Speaker, and Nameplate.

VCI Box

XTOOL D7W VCI Box

The VCI (Vehicle Communication Interface) Box connects wirelessly to the tablet and plugs into the vehicle's OBD port. It includes an OBD Port, Type-C Port, and Nameplate.

Product Overview Video

This video provides a general overview of the XTOOL D7W Smart Diagnostic System, showcasing its features and components.

2. Setup

2.1 Wireless Connection

  1. Press and hold the Power button to turn on the tablet.
  2. Select App language and start the activation.
  3. Input your E-mail address, and click OK to complete the activation.
  4. Plug the VCI box into the OBD port on the vehicle.
  5. Make sure the WiFi connection indicator lights on the VCI box.
  6. Your tablet is now ready for diagnostic.
Wireless Connection Steps

This image illustrates the four steps for establishing a wireless connection between the XTOOL D7W tablet and the vehicle's OBD-II port via the VCI box.

2.2 Language Setup

The device supports 22 languages. To set the language:

  1. Activate the device with email.
  2. Switch language in settings (Diagnosis APP > Setting > Language).
  3. Click 'Updates' in Device.
  4. The device supports 2 languages simultaneously and can be switched at will.

Note: If you cannot switch languages at will, please update the APP to the latest version (Diagnosis APP > Setting > APP).

Language Setup Steps

This image shows the four steps for setting up the language on the XTOOL D7W device, including activation, switching language in settings, updating, and confirming dual language support.

3. Operating Instructions

3.1 Precautions for Diagnosis

  • The voltage range on the car should be +9V to +36V DC.
  • When testing special functions, operate according to prompts and meet test conditions (e.g., engine water temperature 80℃~105℃, headlights and air conditioners off, accelerator pedal released).
  • If the vehicle's electronic control system is complex and a test is impossible or a large amount of test data is abnormal, search for the ECU of the vehicle and select the menu for the model on the ECU nameplate.
  • If the vehicle type or electronic control system to be tested is not found, upgrade the vehicle diagnostic software to the latest version using the Updates menu or consult the XTOOL technical service department.
  • Only use wiring harnesses provided by XTOOL and designed for the device to avoid damage to the vehicle or the device.
  • When running a Diagnostics function, it is forbidden to shut down the device directly. You should cancel the task before returning to the main interface and then shutting down the device.

3.2 Beginning Diagnostic Testing

After the tablet device is properly connected to the vehicle, you can start the vehicle diagnosis. The diagnostic application allows reading ECU information, reading and clearing DTCs (Diagnostic Trouble Codes), checking live data, freeze frame data, and performing various actuation tests across systems like Engine, Transmission, ABS, SRS, and EPB.

3.3 Vehicle Selection

The scan tool offers three methods to access the smart diagnostics system:

AUTO SCAN

Supports automatic reading of vehicle VIN code. Tap "AUTO SCAN" on the diagnosis system entrance. Ensure the car and device are well connected.

MANUAL INPUT

Allows manual input of the car's VIN code. Ensure the 17 characters are correct for accurate test results.

SELECT VEHICLE BY AREA

Choose a car brand by selecting the appropriate region (Europe, America, Asia, China, etc.) at the top of the screen, then select the vehicle model.

Vehicle Selection Screen

This image displays the vehicle selection screen, showing options for Auto Scan, Manual Input, and selection by geographical area (Europe, America, Asia, China, Australia) with various car brands listed.

If your model is not recognized:

  1. UPDATE all software and check if the APP is updated in [Settings].
  2. Click Diagnosis on the main menu, manually select the engine system to read ECU information, and confirm if the VIN can be read.
  3. Contact the XTOOL technical team with the VIN code to confirm support for automatic VIN identification.

3.4 Diagnosis Functions

Read ECU Information

Reads ECU version information, including software/hardware versions, models, production date, and part numbers. Useful for maintenance records and ordering parts.

Read ECU Information Screen

This image shows the "Read ECU Information" screen, displaying system name, programming date, and series number for a Junction Box electronics module.

Read Trouble Code

Displays current and historical Diagnostic Trouble Codes (DTCs). If "System is OK" or "No Trouble Code" is shown, it means no related trouble codes are stored or troubles are not ECU-controlled. Mechanical or executive circuit troubles, or inaccurate sensor signals, can be examined using Live Data.

DTCs Report Screen

This image displays a "DTCs Report" screen, listing trouble codes (e.g., 8020B8, 8020B9) and their descriptions, such as "Tank fill-level sensor, left: short circuit to positive or open circuit."

Clear Trouble Code

Clears current and historical trouble codes from the ECU memory, assuming all issues have been resolved. Clearing unresolved codes will cause them to reappear.

Clear Trouble Code Confirmation

This image shows a confirmation dialog for clearing trouble codes, stating "Erase Command Sent. Please verify that the codes have been erased."

Read Live Data

Displays real-time information from various sensors (Parameter Identifications or PIDs) such as oil pressure, temperature, engine speed, fuel oil temperature, coolant temperature, and intake air temperature. This helps predict problem areas and narrow down maintenance scope. Live data can also be used to evaluate performance characteristics or sensitivity reduction.

Live Data Display Screen

This image shows the "Instrument cluster" live data display, listing parameters like Coolant level, Washer fluid level, and Fuel level sensor readings with their values and units.

The scan tool supports selecting multiple PIDs and combining different graphs into one chart for easier analysis.

Live Data Graphing

This image illustrates the live data graphing feature, showing multiple sensor readings plotted over time on a single chart for comparative analysis.

Data recording allows saving current data values as text files, viewable in Reports > Data Replay. The Pause button can halt recording.

Freeze Frame

When a sensor signal is abnormal, the ECU saves data at that moment to form a freeze-frame, useful for analyzing component failures. The availability of freeze-frame data varies by vehicle model.

Example (Renault Duster ii ph): After selecting the system, the device lists all fault codes. Clicking a fault code (e.g., DF1068) shows the freeze frame, including context when the fault appeared, current context, and additional data.

Freeze Frame Data Display

This image shows the "Additional data" screen for a specific fault code (DF1068), listing details such as mileage since fault disappeared, number of occurrences, and distance traveled with the fault present.

Actuation Test (Bi-directional Control)

Allows sending and receiving information between the device and vehicle modules to test actuating components. This includes functional tests, actuator tests, inspection tests, system tests, reinitialization, and reprogramming. Users can check individual parts for proper functioning.

Bi-directional Control Examples

This image displays various bi-directional control tests, including Compression Test, A/C Clutch On/Off, Window/Mirror Test, Door Lock Test, and Interior & Exterior Lights Test.

3.5 Special Functions

The D7W supports numerous special reset functions for scheduled services, maintenance, and performance resets. These functions help resolve common problems and may vary by vehicle. Always check compatibility before purchase.

ABS Bleeding

Maintains the Anti-Lock Braking System by bleeding air from the brake system to restore ABS brake sensitivity. Necessary when replacing distributor pumps, severe brake fluid shortage, or changing brake fluid.

  1. Read operating instructions and precautions.
  2. Attach bleeder bottle to the left rear bleeder screw.
  3. Open the left rear bleeder screw.
  4. Click "OK" to start the bleed procedure, pumping the brake pedal continuously every 2 seconds.
  5. Continue pumping until air bubbles are no longer visible, then click "OK" for the next wheel.
  6. Repeat for left front, right front, and right rear wheels.
  7. Stop pumping and close the right rear bleeder screw.
  8. Click "OK" to complete.

Caution: The ABS pump screw needs to be unscrewed. Brake fluid will be under pressure; secure the bleed hose and open bleeder screws slowly. Some vehicles may require manual bleeding.

ABS Bleeding Procedure Step 4

This image shows a dialog box during the Automated Brake Bleed procedure, instructing the user to pump the brake pedal continuously and to click OK when ready.

Oil Reset

Resets the engine oil life system after an oil change, allowing the system to calculate the next required oil change interval. Necessary when the service lamp is on or after changing oil/oil-monitoring electric appliances.

  1. Enter the Oil Reset menu and select the vehicle model.
  2. Follow on-screen instructions and press OK.
  3. Enter Maintenance mileage reset menu.
  4. Click INPUT, enter a reasonable remaining oil life value, and press OK.
  5. Confirm the new value and click OK.
  6. A "Write successfully" message will confirm completion.
Oil Reset Confirmation Screen

This image shows the "Engine Oil Life Reset" screen with a "Write successfully" message, indicating the successful completion of the oil reset function.

EPB (Electronic Parking Brake)

Resets the electronic parking brake system and brake pads, G-sensor, and body angle calibration. Used for deactivating/activating brake control, assisting brake fluid control, applying/releasing brake pads, and setting brakes after replacement.

  1. Enter the EPB menu and select the vehicle model.
  2. Follow instructions and press YES.
  3. Enter maintenance mode, release handbrake, and press OK.
  4. Wait for "Successful operation" message and press OK.
  5. Enter Exit maintenance mode and wait for "Successful operation" message.
EPB Reset Instructions

This image shows a dialog box with instructions for EPB reset, including inserting the key, turning on ignition, and releasing the handbrake.

SAS (Steering Angle Sensor) Calibration

Permanently stores the current steering wheel position as the straight-ahead position in the SAS EEPROM. Necessary after replacing the steering angle position sensor, steering mechanical parts, four-wheel alignment, or car body repair.

  1. Enter the SAS menu and select the vehicle model.
  2. Enter the Set steering angle sensor menu and follow instructions.
  3. Wait for instructions and press YES.
  4. Follow instructions and press OK.
  5. Wait for instructions and press OK.
  6. "Function execution is completed" message confirms success.
SAS Calibration Confirmation

This image shows a dialog box for "Set steering angle sensor," asking the user to confirm that the vehicle is parked on level ground and the steering wheel is in the neutral position.

BMS (Battery Management System) Reset

Evaluates battery charge state, monitors current, registers battery replacement, and activates the rest state of the vehicle. Necessary when replacing the main battery or to re-match the control module and motoring sensor.

  1. Enter the BMS Reset menu and select the vehicle model.
  2. Turn on the ignition switch.
  3. Press OK to continue.
  4. Enter battery capacity (within the given range) and press OK.
  5. Enter battery manufacturer and press OK.
  6. Enter the 10-digit battery serial number and press OK.
BMS Reset Battery Manufacturer Input

This image shows the "Battery technology" screen for BMS reset, prompting the user to enter the battery manufacturer.

Injector Coding

Writes the identification code of the fuel injector into the ECU for new injectors or after ECU replacement. Ensures accurate fuel injection control.

  1. Enter the Injector coding menu and select chassis models.
  2. Enter the Fuel injection nozzle injection volume adjustment menu.
  3. Read the note and press OK.
  4. Read and confirm values in cylinders.
  5. Enter the new 5-digit value for the replaced injector(s) and press OK.
  6. "Write successfully" message will appear.
  7. Turn off ignition switch.
  8. Wait for prompt to turn on ignition switch.
  9. Re-enter menu to check new values.
Injector Coding Input Screen

This image shows the "Change the value of cylinder" dialog box, prompting the user to enter a new 5-digit value for injector coding.

DPF (Diesel Particle Filter) Regeneration

Manages DPF regeneration, component replacement teach-in, and teach-in after ECM replacement. Clears PM (Particulate Matter) from the DPF filter. Necessary when exhaust back pressure sensor, PM trap, fuel additive nozzle, or catalytic oxidizer is replaced, or DPF regeneration MIL is on.

  1. Enter the DPF menu and select vehicle models.
  2. Enter the DPF regeneration menu.
  3. Read requisites and press OK.
  4. Read fuel tank level.
  5. Read carbon deposit load.
  6. Choose "drive to warm up" and follow instructions, press OK.
  7. Read instructions and press OK.
  8. Follow instructions and press OK.
  9. Press OK to start regeneration.
  10. Wait for carbon deposit to decrease and "Emergency regeneration has been completed" message. Process may take up to 40 minutes.
  11. Wait 2 minutes for particulate filter to cool down.
  12. Press "drop out" to exit.
DPF Regeneration Prerequisites

This image shows the "DPF regeneration" screen with a list of test prerequisites, such as fuel tank level, transmission position, and electrical appliances status.

TPMS (Tire Pressure Monitoring System) Reset

Performs learning, matching, and resetting functions for tire pressure sensors. Necessary for tire replacement, after troubleshooting pressure problems, or other signal loss causes.

Note: Some vehicles may need a TPMS activation tool. After learning, you may need to drive the car for a while for the fault light to go off. Tire pressure imbalance can also cause the fault light.

The D7W provides 6 menus for major automotive manufacturing regions: Korea, Japan, USA, China, Australia, and Europe.

TPMS Reset Region Selection

This image shows the TPMS Reset screen with options to select the region (Korea, Japan, America, China, Australia, Europe) for specific vehicle models.

TPMS reset methods include Automatic Relearn, Static Relearn, Copy ID, and OBD Relearn. The specific method and procedure may vary by model.

Note: This Scan Tool is not a replacement for the TPMS activation tool; it only provides TPMS Reset/Relearn functions, not activation of TPMS sensors. Consult your local dealer for a professional TPMS activation tool.

3.6 AI-Assisted Diagnostics

The AI-Assisted Diagnostics feature provides fault explanations, step-by-step repair guidance, and structured diagnostic insights after reading DTCs. This feature is available after connecting to the internet and updating to V5.7.56-11.77 or later. AI suggestions are for reference only; always follow factory manuals and professional guidance.

AI-Assisted Diagnostics Interface

This image illustrates the AI-Assisted Diagnostics feature, showing screens for analyzing fault codes, diagnostic reports, and maintenance service guidance.

3.7 Key Programming

The D7W Immobilizer Tool can disable lost vehicle keys and program replacement key fobs. Functions include programming new key fobs, reading PIN codes, checking the number of keys, generating keys, adding keys, and handling all-key-lost scenarios. Works on most vehicle brands.

Key Programming Functions

This image shows the advanced IMMO & Key Programming functions, including Read PIN Code, Check Number of Keys, Generate Dealer Key, All Key Lost, and Add Key.

3.8 FCA AutoAuth, CAN FD & DoIP Protocol Support

The XTOOL D7W supports advanced communication protocols:

  • FCA AutoAuth: Accesses the Security Gateway Module on 2018+ Fiat/Chrysler/Dodge/Alfa Romeo vehicles for diagnostics and bi-directional control without an extra 12+8 cable. (Note: User must register an FCA account.)
  • CAN FD Protocol: Compatible with GM MY2020+ models, offering faster data rates (8 to 64 bytes in CAN frame) without an extra adapter.
  • DoIP Protocol: Supports Diagnostics over IP for BMW (F&G chassis), Volvo (2018+), Land Rover & Jaguar (2017+), enabling higher data rates over TCP/IP and Ethernet.
FCA AutoAuth and Protocol Support

This image illustrates the FCA AutoAuth process (Registration, Set Account, Add Tool, Update Software) and highlights support for CAN FD and DoIP protocols for various vehicle brands.

3.9 VAG Guided Functions

Provides step-by-step troubleshooting and repair guidance specifically for V.A.G (VW, Audi, Skoda) cars, simplifying the diagnostic process. (Note: This function does not take effect in the United States).

VAG Guided Function Example

This image shows the "Guided Function for VAG" feature, detailing steps for diagnosis or specific functions for VW, Audi, and Skoda vehicles.

4. Maintenance

4.1 Software Update

After activating the device, update software modules via the "Updates" screen. The device identifies available packages for download directly via the Internet.

Caution: After contacting XTOOL Support to change language configuration, you need to download all software packages again. When the subscription expires, installed software remains functional, but updates are invalid. XTOOL is not responsible for restoring deleted software. Contact your local dealer or XTOOL technical support to renew your subscription.

Software Update Screen

This image shows the "Updates" screen on the XTOOL D7W tablet, displaying a list of available software updates for various car brands and their download progress.

4.2 Factory Reset

Restoring factory settings in the Android OS system erases custom settings and data, restarts the device, and enters factory reset mode. Trigger a factory reset by clicking "Settings" > "Backup & reset" from the main home page. After reset, you can select the language.

Factory Reset Language Selection

This image shows the language selection screen after a factory reset, allowing the user to choose their preferred language for the device interface.

5. Troubleshooting

5.1 DTC Status Descriptions

Understanding Diagnostic Trouble Code (DTC) statuses is crucial for effective troubleshooting:

DTC StatusDescriptionSuggestions
Current/PresentTrouble codes stored in the ECU when both continuous and non-continuous monitors fail. MIL is commanded ON.Can be cleared using the Clear DTC function or when the ECU monitor completes 40 consecutive trips without a fault.
History/StoredTrouble codes stored when continuous and non-continuous monitors fail (2nd trip). Set with Current DTCs and not cleared by ECU monitor.Can only be cleared using the Clear DTC function of the Scantool.
PendingPreliminary fault investigation codes that prep themselves when a fault is determined during an engine cycle. Random malfunctions.Typically not severe, but shouldn't be ignored. Can be cleared using the Clear DTC function.
PermanentTrouble codes stored in the ECU when continuous and non-continuous monitors fail. Set with Current and History DTCs.Cannot be cleared using the Clear DTC function. Cleared when the ECU monitor completes and passes three consecutive trips.
Active/static (For Volkswagen)Fault is happening at the moment and should be addressed.Cannot be cleared directly by the diagnostic tool. Internal fault must be eliminated manually.
Passive/sporadic (For Volkswagen)Fault occurred in the past.Can be cleared by Scantool. User should check if the DTC reappears.

5.2 Remote Assistance

The TeamViewer QuickSupport program allows XTOOL technical support to remotely control your tablet for assistance. Ensure the tablet is connected to the Internet.

  1. Turn on the tablet.
  2. Click Remote in the Diagnostic application to display the TeamViewer screen and generate a device ID.
  3. Your partner/technician installs the full TeamViewer program on their computer.
  4. Provide your ID to the partner/technician.
  5. A pop-up window will ask for permission; click Allow to accept.
TeamViewer QuickSupport Screen

This image shows the TeamViewer QuickSupport screen on the XTOOL D7W tablet, displaying instructions on how to connect and the device's unique ID for remote assistance.

6. Specifications

FeatureSpecification
Model NameXTOOL D7W
Brand NameXTOOL
OSAndroid 10
Memory2GB+64GB
Display Size7 inches
Battery Capacity2500mAh 7.3V
Wireless FunctionWifi
Communication InterfaceOBD-II, Wi-fi
Software UpdateYes (3 Years Free Updates)
Hardware Version2026
Software Version2026
External Testing CertificationCE
Item Weight3kg
Item Height18cm
Item Width2cm
Item Length25cm
MaterialSteel & Plastic
Supported ProtocolsCAN FD, DoIP, FCA AutoAuth
Languages SupportedEnglish, Spanish, French, German, Polish, Portuguese, Russian, Danish, Greek, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Swedish, Thai, Arabic, Turkish, Vietnamese, Traditional Chinese.
XTOOL D7W Tablet and VCI Box

This image shows the XTOOL D7W tablet and VCI box, highlighting key hardware features like Android 10, 7-inch screen, wireless & wired connectivity, 2500mAh battery, super fast charging, 2x64GB storage, built-in camera, and adjustable kickstand.

7. User Tips

  • Language Change: If you need to change the language after receiving the device, send the S/N (serial number) of the device to the seller. If you cannot switch languages at will, update the Diagnosis APP to the latest version (APP > Setting > APP).
  • Compatibility Check: Before purchasing, send your car's brand, model, year, and VIN to the seller to confirm compatibility, especially for specific functions like ECU Coding or Key Programming.
  • Wireless Connectivity: The Wi-Fi connection offers faster transmission speeds and a longer diagnostic distance (up to 100ft in open environments) compared to Bluetooth, making work more efficient.
  • Updates: The device comes with 3 years of free updates. After this period, the device remains functional, but new software updates require purchasing an update service.
  • FCA AutoAuth: For FCA vehicles (2018+ Fiat/Chrysler/Dodge/Alfa Romeo), you will need to register an FCA account to access certain diagnostic functions.
  • VAG Guided Functions: Note that VAG Guided Functions (for VW/Audi/Skoda) may not be effective in all regions, such as the United States.
  • General Use: The device is highly functional and provides excellent value for money, suitable for both professionals and DIY enthusiasts. It is effective at reading and classifying faults.

8. Warranty & Support

8.1 Warranty

The XTOOL D7W comes with a 2-year warranty. The device includes 3 years of free software updates from the date of activation. After 3 years, the device can still be used normally, but new software updates will require purchasing an update service (approximately $99 per year).

8.2 Support & Service

For technical support, updates, or any inquiries, please use the following contact information:

  • Official Website: www.xtooltech.com
  • Telephone (China): +86 755 21670995 or +86 755 86267858
  • E-mail: supporting@xtooltech.com
  • Remote Assistance: Use the built-in TeamViewer QuickSupport program for remote technical support.

XTOOL technical staff provides lifelong technical support services to address any issues you may encounter.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.