1. Introduction
Thank you for purchasing the EOENKK G10 Bluetooth Speaker. This versatile device combines a high-quality Bluetooth speaker with an LED mirror screen, digital dual alarm clock, FM radio, phone holder, and temperature display. Please read this manual carefully to ensure proper use and optimal performance of your new speaker.
2. Key Features
- Customized support for dual alarms, designed to wake you up effectively.
- Mirror effect screen can be used as a convenient makeup mirror.
- Clear LED display for alarm clock, temperature, and time at a glance.
- Bluetooth 5.0 chip for low latency, low power consumption, and stable connection up to 10 meters.
- Super endurance for extended music listening.
- Intuitive button operation for simple and convenient control.
- High-definition hands-free calling with a built-in microphone for clear sound.
- Multifunctional support for Bluetooth, TF card playback, and FM radio modes.
- High volume and stunning sound with clear, transparent, powerful audio, bright high notes, full midrange, and deep bass.
Figure 1: Overview of Product Features
3. Package Contents
Please check the box for the following items:
- 1 x EOENKK G10 Bluetooth Speaker
- 1 x Micro USB Data Cable
- 1 x User Manual (this document)
4. Product Overview
Video 1: EOENKK G10 Product Demonstration
Figure 2: Front View of the Speaker
4.1 Controls and Ports
Figure 3: Button Functions
- Power/Play/Pause Button: Short press to play/pause music, long press to power on/off.
- Next Song Button: Short press to skip to the next track.
- Last Song Button: Short press to go to the previous track.
- Mode (M) Button: Short press to switch between Bluetooth, TF card, and FM radio modes.
- Snooze Button: Activates snooze function for alarms.
- Brightness Adjustment Button: Adjusts the display brightness.
- Alarm 1 Button: Short press to turn Alarm 1 on/off. Long press to set Alarm 1.
- Alarm 2 Button: Short press to turn Alarm 2 on/off. Long press to set Alarm 2.
- SET Button: Long press to enter clock setting mode.
Figure 4: Side Ports (DC5V, TF, AUX)
- DC5V Port: Micro USB charging input.
- TF Card Slot: For Micro SD card playback.
- AUX Port: For wired audio input.
4.2 Phone Holder
Figure 5: Mobile Phone Holder
The speaker features an integrated mobile phone holder on top, allowing for hands-free viewing of your device while listening to music or using the alarm functions.
5. Setup Instructions
5.1 Charging the Speaker
- Connect the provided Micro USB cable to the DC5V port on the side of the speaker.
- Connect the other end of the USB cable to a 5V/1A USB power adapter (not included) or a computer USB port.
- The charging indicator will illuminate. A full charge takes approximately 3 hours.
- Once fully charged, the indicator light may change or turn off, depending on the unit. Disconnect the charging cable.
5.2 Power On/Off
- To Power On: Long press the Power/Play/Pause button (refer to Figure 3). The display will light up.
- To Power Off: Long press the Power/Play/Pause button again. The display will turn off.
5.3 Setting the Clock
- With the speaker powered on, long press the SET button. The hour digits will start flashing.
- Use the Next Song and Last Song buttons to adjust the hour.
- Short press the SET button to move to the minute digits, then adjust using the Next Song and Last Song buttons.
- Continue short pressing SET to cycle through and set the year, month, day, and day of the week. Adjust each value with the Next Song and Last Song buttons.
- Once all settings are complete, short press SET one last time or wait a few seconds for the settings to save automatically.
6. Operating Instructions
6.1 Bluetooth Pairing
- Power on the speaker. It will automatically enter Bluetooth mode, indicated by a flashing 'BT' icon on the display.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "G10" from the list of devices.
- Once paired, the 'BT' icon will stop flashing and remain solid, and you will hear a confirmation tone.
- You can now play audio from your device through the speaker.
6.2 FM Radio Mode
- Short press the Mode (M) button until 'FM' appears on the display.
- Long press the Play/Pause button to automatically scan and save available FM radio stations. The speaker will cycle through frequencies and store stations with strong signals.
- Once scanning is complete, use the Next Song and Last Song buttons to navigate between saved stations.
6.3 TF Card Playback
- Insert a Micro SD (TF) card (up to 32GB, not included) with audio files into the TF card slot on the side of the speaker.
- The speaker should automatically switch to TF card mode. If not, short press the Mode (M) button until 'TF' appears on the display.
- Use the Next Song and Last Song buttons to control playback.
6.4 AUX Input Mode
- Connect an audio device to the AUX port on the side of the speaker using a 3.5mm audio cable (not included).
- Short press the Mode (M) button until 'AUX' appears on the display.
- Audio will now play from your connected device. Control playback from the connected device.
6.5 Setting and Managing Alarms
- To Set Alarm 1 or Alarm 2: Long press the corresponding Alarm 1 or Alarm 2 button. The hour digits will flash.
- Use the Next Song and Last Song buttons to adjust the hour, then short press the Alarm button to move to minutes and adjust.
- After setting the time, short press the Alarm button again to select the alarm tone (if applicable) or confirm the setting.
- To Activate/Deactivate an Alarm: Short press the Alarm 1 or Alarm 2 button. The alarm icon (⏰1 or ⏰2) will appear on the display when active and disappear when deactivated.
- Snooze Function: When an alarm sounds, short press the Snooze button to temporarily silence it. The alarm will sound again after a set interval.
- To Stop an Alarm: Press any other button (except Snooze) when the alarm is sounding to turn it off for the day.
6.6 Adjusting Display Brightness
- Short press the Brightness Adjustment button (refer to Figure 3) to cycle through different brightness levels for the LED display.
6.7 Temperature Display
Figure 6: Temperature Display
The speaker automatically displays the ambient temperature. No manual adjustment is required for this feature.
7. Maintenance
- Keep the speaker away from water, moisture, and extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid dropping the speaker or subjecting it to strong impacts.
- When not in use for extended periods, charge the battery periodically to maintain its lifespan.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker for at least 3 hours. |
| Cannot pair via Bluetooth. | Bluetooth not enabled on device; speaker not in pairing mode; too far from device. | Ensure Bluetooth is on, speaker is in BT mode (flashing 'BT'), and devices are within 10 meters. Try restarting both devices. |
| No sound from speaker. | Volume too low; incorrect mode selected; device not playing audio. | Increase speaker and device volume. Ensure correct mode (BT, TF, FM, AUX) is selected. Check if the audio source is playing. |
| FM radio reception is poor. | Weak signal; interference. | Move the speaker to a different location. Ensure no strong electronic interference nearby. |
| Alarms are not sounding or cannot be turned off. | Alarm not activated; incorrect time set; volume too low. | Ensure the alarm icon (⏰1 or ⏰2) is visible on the display. Verify alarm time. Increase speaker volume. To deactivate, short press the corresponding Alarm button until the icon disappears. |
9. Specifications
| Feature | Specification |
|---|---|
| Model | G10 |
| Type | Bluetooth Speaker |
| Material | ABS Plastic |
| Bluetooth Version | 5.0 |
| Communication | AUX, Bluetooth |
| Working Voltage | 3.7V |
| Charging Voltage | 5V/1A |
| Charging Interface | Micro USB |
| Battery Capacity | 1200mAh |
| Working Hours | Approx. 8 hours |
| Charging Time | Approx. 3 hours |
| Output Power | 5W |
| Memory Expansion | Supports up to 32GB Micro SD cards (not included) |
| Product Dimensions (L x W x H) | 13.7 cm x 6.2 cm x 4.2 cm (5.41 in x 2.44 in x 1.65 in) |
| Channels | 2 (2.0) |
| Display Screen | Yes |
| Waterproof | No |
| Voice Control | No |
| Support APP | No |
| Power Source | Battery, USB |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 1 |
| Tweeter Material | Metal |
| Control | Volume control |
Figure 7: Product Dimensions
10. User Tips
- Alarm Management: To quickly check if an alarm is active, look for the ⏰1 or ⏰2 icon on the display. A short press of the corresponding Alarm button will toggle it on or off.
- Display Information: The speaker conveniently displays both the day of the week and the current temperature, in addition to the time.
- Mirror Functionality: The mirror screen is not just for display; it can be used as a practical makeup mirror.
11. Warranty and Support
This product comes with a standard manufacturer's warranty. For any issues or support inquiries, please refer to the seller's contact information or the platform where the product was purchased. Keep your purchase receipt as proof of purchase.