Edifier W260NC ANC Noise Cancelling TWS Earphones User Manual

Introduction

The Edifier W260NC are advanced True Wireless Stereo (TWS) earphones designed to deliver a superior audio experience with Active Noise Cancellation (ANC). Featuring Hi-Res Audio Wireless certification, LDAC codec support, and coaxial dual-dynamic drivers, these earphones provide rich, lossless sound. With a long battery life, clear call quality, and smart features, the W260NC is built for diverse listening environments and activities.

Package Contents

Please check the package for the following items:

• Edifier W260NC TWS Earphones (Left and Right earbuds)
• Charging Case
• USB-C Charging Cable
• Eartips (various sizes)
• User Manual (this document)

Product Overview

The Edifier W260NC earphones feature a sleek design with a leather texture charging case. Each earbud is equipped with multiple microphones and a wear sensor for intelligent functionality.

Setup Instructions

1. Initial Charging

1. Place both earbuds into the charging case.
2. Connect the USB-C charging cable to the charging port on the case and to a 5V=1A power source.
3. The indicator lights on the case will show charging status. A full charge takes approximately 1.5 hours.
4. A 15-minute fast charge provides up to 2 hours of playtime.

2. Bluetooth Pairing

1. Ensure the earbuds are charged and in the charging case with the lid open.
2. On your device (smartphone, tablet, laptop), enable Bluetooth.
3. Search for available Bluetooth devices and select "Edifier W260NC".
4. Once connected, the earbuds are ready for use.

3. Dual-Device Connection

The W260NC supports simultaneous connection to two devices, allowing seamless switching between them.

4. Edifier ConneX App Installation

For full customization and access to advanced features, download the Edifier ConneX App from your device's app store.

Operating Instructions

1. Basic Controls

The earbuds feature control buttons for various functions. Refer to the app for customizable controls.

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Answer/End Call: Single tap on either earbud.
• Reject Call: Press and hold either earbud.
• Activate Voice Assistant: Triple tap on either earbud (customizable).
• Volume Control: Adjust via your connected device or through the Edifier ConneX App.

2. Active Noise Cancellation (ANC) Modes

The W260NC offers Hybrid Active Noise Cancellation up to -45dB, with multiple modes to suit your environment.

Switch between modes using the control button (customizable via app) or the Edifier ConneX App:

• High Noise Cancellation: Ideal for very noisy environments like airplanes or busy commutes.
• Low Noise Cancellation: Suitable for moderately noisy places like offices or cafes.
• Wind Reduction: Minimizes wind noise during outdoor activities.
• Ambient Sound: Allows you to hear your surroundings while listening to audio, useful for safety.

3. Intelligent Start-Stop (Wearing Detection)

The built-in wear sensor automatically pauses music when you remove an earbud and resumes playback when you put it back in.

4. Making Calls

Each earbud features three built-in microphones (total of six) with AI noise filtering algorithms for clear calls.

5. Sound Experience

Experience rich and lossless sound quality thanks to Hi-Res Audio Wireless certification and LDAC codec support (96kHz sampling rate, 24-bit depth, 990 kbps).

The coaxial dual-dynamic drivers (10mm woofer + 6mm tweeter) provide a wider frequency response range, enhancing crisp vocals and dynamic bass.

Maintenance

1. Cleaning

• Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Clean the eartips regularly with water and mild soap, ensuring they are completely dry before reattaching.
• Ensure charging contacts on both earbuds and case are clean and dry.

2. Water and Dust Resistance

The W260NC earphones are IP54-rated for dust and splash resistance. This means they are protected against limited dust ingress and water splashes from any direction. They are suitable for workouts and light rain but should not be submerged in water or exposed to heavy rain.

3. Battery Care

• Avoid fully discharging the battery frequently.
• Store the earphones in a cool, dry place when not in use.
• Do not expose to extreme temperatures.

Troubleshooting

• Earbuds not pairing: Ensure both earbuds are in the case, charged, and the case lid is open. Forget the device in your phone's Bluetooth settings and try pairing again.
• One earbud not working: Try resetting the earbuds (refer to the app or Edifier support for specific reset instructions). Ensure both are charged.
• Poor sound quality: Check eartip fit. Ensure LDAC is enabled in the Edifier ConneX App if desired. Adjust EQ settings in the app.
• ANC not effective: Ensure earbuds are properly seated in your ears. Try switching between ANC modes.
• Earbuds not charging: Check the USB-C cable and power adapter. Ensure charging contacts are clean.

Specifications

User Tips

• Optimize Bass: If you find the bass response not to your preference, utilize the Edifier ConneX App's SoundID feature or equalizer settings to customize the audio profile. This can significantly improve the listening experience.
• LDAC Configuration: For the highest quality audio, ensure LDAC is enabled in the "HD audio codec" settings within the Edifier ConneX App.

Warranty and Support

Edifier products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Edifier website or contact their customer service. Keep your proof of purchase for warranty claims.